• 전기학회논문지
• /
• 제56권8호
• /
• pp.1424-1429
• /
• 2007

This paper presents a simple and reliable one-touch type multi-immunosensing lab-on-a-chip (LOC) detecting antibodies as multi-disease markers using electrochemical method suitable for a portable point-of-care system (POCS). The multi-stacked LOC consists of a PDMS space layer for liquids loading, a PDMS valve layer with 50 im in height for the membrane, a PDMS channel layer for the fluid paths, and a glass layer for multi electrodes. For the disposable immunoassay which needs sequential flow control of sample and buffer liquids according to the designed strategies, reliable and easy-controlled on-chip operation mechanisms without any electric power are necessary. The driving forces of sequential liquids transfer are the capillary attraction force and the pneumatic pressure generated by air bladder push. These passive fluid transport mechanisms are suitable for single-use LOC module. Prior to the application of detection of the antibody as a disease marker, the model experiments were performed with anti-DNP antibody and anti-biotin antibody as target analytes. The flow test results demonstrate that we can control the fluid flow easily by using the capillary stop valve and the PDMS check valves. By the model tests, we confirmed that the proposed LOC is easily applicable to the bioanalytic immunosensors using bioelectrocatalysis.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.80-86
• /
• 2020

With the exception of welding activities, it is forbidden to use electricity in shipyards, owing to safety concerns such as the possibility of fire, explosions, and short circuits. In this paper, an automatic chamfering machine using pneumatics is proposed for use in such environments. Customers specify their requirements and the machine derives the corresponding theoretical design conditions. The proposed machine was used to perform 3D modeling, and its suitability and performance were confirmed via cutting experiments of the manufactured device. Two types of sensors may be used in this system: contact and non-contact. In the case of the contact type, an end-stop switch that can recognize the end of the material is installed, and when the machine reaches the end of the material, the end-stop switch is operated to cut off the air pressure. In the non-contact type, four sensors were used: photonic, ultrasonic, metal detection, and encoder. The use of the four sensors was repeated 30 times, and the average error determined. Thus, the optimum sensor was identified.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.264-274
• /
• 2013

Piping systems play an important role in gas and oil transferring system. In the piping system, there are many elements, such as valves and flow meters. In order to check their normal operating conditions, each signal from each element is displayed on the monitor in the pipe control room. By the way, there are several accidental cases in the piping system even if all signals from the local elements are judged to be normal on the monitor in the control room. Further, opposite cases often happen even the monitor shows abnormal while the local elements work normal. To overcome this abnormal functions, it is not so easy to construct the environment in which sensors detecting the working states of all elements installed in the piping system. In this paper, a new non-contact measurement technique which can calculate the elements' delicate displacements by using a PIV(particle image velocimetry) and diagnose their working states by using a neural network is proposed. The measurement system consists of a host computer, a micro system, a telescope and a high-resolution camera. As a preliminary test, the constructed measurement system was applied to measure delicate vibrations of mobile phones. For practical application, a pneumatic system was measured by the constructed system.

• Composites Research
• /
• 제27권2호
• /
• pp.47-51
• /
• 2014

본 논문은 기존의 유/공압 및 전기식 모터를 대체할 수 있는 경량, 고성능 지능소자 구동기를 설계/제작하고 이를 소형 무인비행체의 조종익 시스템에 적용 가능성을 연구한 것이다. 또한 압전 복합재료 작동기에 대한 성능평가를 수행하였으며, 유니모프 및 바이모프 형태의 작동기를 제작하여 각각의 작동 특성을 확인하였다. 이와 같은 성능시험 평과 결과를 통해 바이모프 형태의 작동기가 하중 유무와 무관하게 선형적인 받음각 변화를 가짐을 알 수 있었다. 이러한 지능소자 구동 시스템은 소형 로봇, 유도무기 및 MAV, UAV의 조종익 제어 시스템으로 사용될 수 있는 가능성을 확인하였다.

• 소음진동
• /
• 제9권2호
• /
• pp.285-294
• /
• 1999

Transient analysis for compressible fluid flow has been performed experimentally and analytically to study the dynamic characteristics of the end volume transmission lines following a sudden pressure change a its entrance. The numerical method was developed based on the method of characteristics. The sudden pressure at its entrance was generated by rupture of diaphragm in a shock tube. The sudden pressure was used to obtain the response, as input signal for the numerical analysis. The response to the sudden pressure at the end volume was measured using a pressure transducer. The experimental result shows good agreements with the numerical result. The effects of tube length, its diameter and end volume magnitude are evaluated on the responses of the pressure and on the damping factor. It is found that the viscous damping effects on the response through the transmission pipeline becomes larger with increasing pi;eline length and decreasing diameter of the pipe and the fluid-elastic stiffness decreases with increasing the terminal volume. The numerical approach presented in this paper can be very useful in designing the instrument and control system.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.

• 한국추진공학회지
• /
• 제14권6호
• /
• pp.89-102
• /
• 2010

본 논문에서는 항공우주분야의 구동장치와 여러 산업분야에서 응용되고 있는 미래 지향적 구동기의 기술에 대한 사항과 발전방향에 대해 연구하였다. 특히, 항공기 비행조종면 구동장치의 경우 기존에는 기계식 링키지나 무게 대비 출력이 높은 유 공압 구동기가 많이 사용되었으나 최근에는 대부분의 항공기에서 사용 중인 Fly-By-Wire 시스템과 더 나아가 'More Electric', 'All Electric' 시스템으로의 변화가 이루어지고 있다. 전기식 유압구동기와 전기식 구동장치의 경우 효율이나 안전성 그리고 비용적인 측면에서 우수하기 때문에 근래에 지속적인 개발이 진행되고 있다. 또한, 최근에는 구동기의 무게와 정밀도 그리고 응답속도의 향상을 위해 신소재를 이용한 새로운 분야의 구동기들이 개발되고 있다. 따라서 본 연구를 통해서 차세대 항공우주분야 구동장치와 신개념 구동기들의 세부기술 및 발전방향을 제시하고자 한다.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.174-184
• /
• 2017

본 논문은 철도 차량용 electro-mechanical brake (EMB)의 클램핑 포스 과도응답 향상을 위한 토크 예측 제어 방법을 제안한다. 일반적으로 철도 차량에는 공압식 제동 시스템이 사용된다. 공압식 제동 시스템은 외부환경 변화에 민감하며, 과도응답 속도가 느리기 때문에 공주시간이 증가한다. 또한, 긴급 제동과 같은 기준 이상의 제동 토크를 인가하는 경우에 제동 효율이 낮은 단점이 있다. 이러한 공압식 제동 시스템의 단점은 철도 차량용 EMB 시스템을 적용하여 극복할 수 있다. 철도 차량용 EMB 시스템은 차량의 축중을 감소시키고, 설계 공간을 확보하기 때문에 연비 증가 및 설계 유연성 확보 등의 장점을 갖는다. 본 논문에서는 철도 차량용 EMB의 클램핑 포스 과도응답 향상을 위한 제어 방법을 제안한다. 제안하는 제어 방법의 타당성은 시뮬레이션을 통해 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1500-1503
• /
• 2003

One of the main goals in the rehabilitation of SCI patients is to enable the patient to stand and walk themselves. We are developing high-thrust powered gait orthosis(PGO) that use air muscle actuator(shadow robot Co., UK) to be assisted gait and rehabilitation purposes of them. We made of PD controller and measured hip joint angle by its load and the pressure to control air muscle of PGO. As a results, maximum flexion angle of hip joint is $20^{\circ}$, and angular velocity is 30.4${\pm}2.5^{\circ}/sec$, and then delay time of system was average 0.62${\pm}$0.03s. As the hip flexion angle and the pelvic angle is decreased during the gait with PGO, the patient can walk faster. By using the PGO, the energy consumption can also be decreased. therefore, the proposed PGO can be a very useful assitive device for the paraplegics to walk.

• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.38-49
• /
• 2018

This research describes the development model and testing of a hybrid damper which can be applicable to a vehicle suspension. The hybrid damper is devised to improve the performance of a conventional passive oil damper using a magneto-rheological (MR) accumulator which consists of a gas accumulator and a MR device. The level of damping is continuously variable by the means of control in the applied current in a MR device fitted to a floating piston which separates the gas and the oil chamber. A simple MR device is used to resist the movement of floating piston. At first a mathematical model which describes all flows within the conventional oil damper is formulated, and then a small MR device is also devised and adopted to a mathematical model to characterize the performance of the device.