• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.525-530
• /
• 2004

In this paper, the optimum design of tire sidewall contour consisted of double plies for improving automobile maneuverability and tire durability is considered and a GUI program is developed for the purpose of the practical design. Each improvement of maneuverability and durability depends on the cord tension and strain energy distribution of tire sidewall. Satisfing trade-off method, which requires the judgment of aspiration levels, is used for the multi-objective optimization problem. Also, this paper presents the application to the practical sidewall contour design with the GUI program developed using visual Fortran.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.109-115
• /
• 2001

This paper investigates the mechanical characteristics of angle-ply laminates with non-woven carbon tissue. The lami- nates were made by inserting non-woven carbon tissue at the interface. Specimens were rounded near the tabs by grinding and polishing to reduce the stress concentration. Cyclic loads were applied to the specimens and the stress and fatigue life curves were obtained. The matrix crack density was also evaluated to check the effects of non-woven carbon tissue on the fracture resistance of composite laminates. C-Sean technique was used to evaluate the delamination, and SEM was used to understand the fracture mechanisms of the laminates. Experimental results show that the fatigue strength and life of composite laminates were increased by inserting non- woven carbon tissues. The results also show that the matrix crack density and delamination area were reduced by inserting non-woven carbon tissues.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.37-44
• /
• 1997

Composite materials have various complicated characteristics depending on the ply materials, ply orientations, ply stacking sequences and boundary conditions. Therefore, it is difficult to analyze composite materials. For efficient use of composite materials in engineering applications, the dynamic behavior such as natural frequencies and nodal patterns should be identified. This study presents FEM results for the free vibration of symmetrically and antisymmetrically laminated composite and hybrid composite rectangular plates. The natural frequencies of laminated composite rectangular plates having the various boundary conditions (completely clamped, 2-edge clamped, cantilevered) are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with that calculated by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.937-938
• /
• 2007

임계온도가 높아 외부교란에 대하여 대단히 안정한 장점을 지닌 고온초전도체를 이용하여 600 kJ급의 SMES (Superconducting Magnetic Energy Storage)용 마그네트를 개발하고 있으며, 이의 설계 제작에 선행하여 선정된 4-ply도체에 대한 N-value 및 임계전류 특성을 상이한 외부자장의 크기 및 방향에 대하여 조사하였다. 그 주요 결과를 요약하면 4-ply도체의 측정된 N-value는 이의 정의에 사용된 전계영역의 범위에 따라 매우 상이하며, 또한 경사자장 ($\theta=30^{\circ}$)에 대하여 측정된 임계전류는 4-ply도체 면에 수직한 자장성분으로부터 계산된 임계전류와 비교적 잘 일치함을 알 수 있다.

• Journal of KSNVE
• /
• v.2 no.4
• /
• pp.305-315
• /
• 1992

In order to investigate the effects of layer-wise in-plane displacements on vibration and damping characteristics of composite laminated plates, the finite element method based on the generalized laminated plate theory(GLPT) has been formulated. Specific damping capacity of each mode was obtained by modal strain energy method. To see the effect of transverse shear on deformation, the strain energy of stress components was computed. The accuracy of this study was examined for the cylindrical bending vibration of cross-ply plate strip. The results were very accurate compared with 3-D solutions. The numerical results show that through-thickness variation of in-plane displacements has not so much influence on the natural frequency, but has a great influence on the damping of composite plates, especially on the damping of thick composite plates since the damping is affected by local behavior while the natural frequency is affected by global behavior.

• Geomechanics and Engineering
• /
• v.18 no.5
• /
• pp.555-566
• /
• 2019

The purpose of this paper is to investigate the thermal effects on the behaviour reinforced-concrete beams strengthened by bonded angle-ply laminated composites laminates plate $[{\pm}{\theta}n/90m]_S$. Effects of number of $90^{\circ}$ layers and number of ${\pm}{\theta}$ layers on the distributions of interfacial stress in concrete beams reinforced with composite plates have also been studied. The present results represent a simple theoretical model to estimate shear and normal stresses. The effects the temperature, mechanical properties of the fibre orientation angle of the outer layers, the number of cross-ply layers, plate length of the strengthened beam region and adhesive layer thickness on the interfacial shear and normal stresses are investigated and discussed.

• Korean Journal of Food Science and Technology
• /
• v.13 no.3
• /
• pp.219-226
• /
• 1981

To enable off-season peach canning, peaches were halved and processed into solid packs. Following variables were compared in relation to storage stability of solid packs. First as pretreatment-dipping in citric and ascorbic solution after lye peeling; second as pasturization in pouch and hot fill process; third as packaging method-2 ply(PET/PE) and 3 ply(PET/Al/PE) plastic film pouch and metal container; fourth as storage condition $-20^{\circ}C\;and\;-5^{\circ}C$. After 25 weeks storage test, all peaches in different packs were processed into canned peaches just like commercial products, and then quality was organoleptically evaluated from the viewpoint of processing and storage variable of solid packs. The results are follows; 1. Ascorbic acid dipping in 3 ply pouch and citric acid dipping in 2 ply pouch had better quality retention effect than any other pretreatments in respective packing. 2. Pasteurization method gave great effect on the color and texture of the solid pack during storage, but not on the quality of the final canned peach. 3. Can and 3 ply packing were better than 2 ply pouch in storage of solid pack and quality of final canned peach. 4. The $5^{\circ}C$ storage gave better quality than $20^{\circ}C$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.33-41
• /
• 2023

The application of seismic separation joints that can improve the deformation capacity of piping is an effective way to improve seismic performance. Seismic separation joints capable of axial expansion and bending deformation are installed where deformation is expected and used for the purpose of safely protecting the piping. Bellows are flexible and have low stiffness, so they can be used as seismic separation joints because they have excellent ability to respond to relatively large deformation. In this study, the seismic performance and limit state for bending deformation of 2-ply and 3-ply bellows specimens were evaluated. Seismic performance was evaluated by applying an increasing cyclic load to consider low-cycle fatigue due to seismic load. In order to confirm the margin for the limit state of the evaluated seismic performance, an experiment was conducted in which a cyclic loading of constant amplitude was applied. As a result of the experiment, it was confirmed that the bellows specimen was made of stainless steel and had a high elongation, so that the 2-ply bellows specimen had the limit performance of resisting within 3 cycles even at the maximum forced displacement of the 3-ply bellows specimen.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.187-190
• /
• 2001

Response surface method is applied to evaluate the reliability of laminated composite panels. Since the linear and nonlinear first-ply failure load are computed using deterministic finite element analysis, new probabilistic finite element analysis is not necessary. Tsai-Wu criterion is used to construct the limit state suface. Material properties, layer thickness and lamina strengths of laminated composite panel are treated as random design variables. feasibility and accuracy of current method is validated using Monte-Carlo method Which perform thousand times of finite element analysis directly.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.126.1-126.1
• /
• 2005