• 제목/요약/키워드: Plural

검색결과 244건 처리시간 0.029초

효과적인 역할계층 관리를 위한 기본 무결성 규칙 (Master Integrity Principle for Effective Management of Role Hierarchy)

  • 오세종
    • 정보처리학회논문지C
    • /
    • 제12C권7호
    • /
    • pp.981-988
    • /
    • 2005
  • ARBAC(adminstrative role-based access control)은 다수의 보안 관리자에 의한 분산 권한관리를 위한 대표적인 보안 모델이다. 각각의 보안 관리자는 역할계층 내에서 자신의 권한 관리 영역을 지정 받는다. ARBAC 모델의 문제중의 하나는 역할계층에 대한 합법적인 변경행위가 불법적 정보 흐름과 같은 원하지 않는 결과를 가져올 수 있다는 점이다. 이를 방지하기 위해 ARBAC 모델의 일부인 RRA97 모델에서는 역할 계층의 기하학적 구조에 기초한 복잡한 제약조건을 제시하고 있다. 본 논문에서는 집합론에 기초한 단일 무결성 규칙을 제안한다. 이 규칙은 단순하고 직관적이며, RRA97 모델의 모든 제약조건을 대체할 수 있다.

EMTP를 이용한 345kV급 송전계통 사고시 초전도한류기가 미치는 영향 검토 (Investigation of Superconducting Fault Current Limiter effect for a 345kV transmission line system fault through the EMTP simulation)

  • 박수만;김재철;문종필;홍원표;이승학
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 A
    • /
    • pp.148-150
    • /
    • 2002
  • Recently the demand for electrical power is significantly increased due to the life improvement of customers. Correspond to the result, the transmission capacity is larger, also the fault current is significantly larger. Within the methods of limiting this fault current, the methods of using the fault current limiter is on the rise. If the Superconducting Fault Current Limiter(SFCL) is applied, then the power delivery loss doesn't exist between the plural power systems, also the fault current can be reduce. But for applying the real system, it needs to investigate the effect of SFCL before appling to real power systems. Consequently, the fault of transmission with SFCL was simulated using EMTP. It was investigated to the effect of SFCL at the 345[kV] transmission fault according to compare with the case of appling SFCL and removing SFCL.

  • PDF

리미트사이클을 발생하는 연속시간 모델 순환결합형 신경회로망에서 카오스 신호의 영향 (Analysis of Dynamical State Transition and Effects of Chaotic Signal in Continuous-Time Cyclic Neural Network)

  • 박철영
    • 한국지능시스템학회논문지
    • /
    • 제16권4호
    • /
    • pp.396-401
    • /
    • 2006
  • 순환결합형 신경회로망은 복수 개의 리미트사이클을 생성하며 따라서, 많은 동적 정보를 저장할 수 있는 메모리 시스템으로 사용할 수 있다는 것이 알려져 있다. 본 논문에서는 각 뉴런이 최근접 뉴런에만 이진화한 결합하중 ${\pm}1$로 연결된 연속 시간모델 순환결합형 신경회로망을 구현하였다. 그리고 이런 회로망을 통해 생성되는 리미트사이클의 수와 패턴을 시뮬레이션을 통하여 나타내었다. 또한 카오스 신호를 인가하여 리미트사이클 사이의 천이 가능성을 입증하였다. 특히, 카오스 신호 이외의 랜덤 노이즈를 이용한 해석을 통하여 동적 신경회로망에 카오스 노이즈를 인가하는 경우의 유효성을 검토하였다.

현대 패션에 나타난 다원주의에 관한 연구 (A Study on the Pluralism Expressed in Modern Fashion)

  • 최영옥
    • 한국의류산업학회지
    • /
    • 제5권5호
    • /
    • pp.453-464
    • /
    • 2003
  • This study is to analyze that the pluralism is the main aspect of the modem fashion which examines the definition and the character of the pluralism. This will also consider the pluralism that appeared on the modern fashion which is based on them. The main point of pluralism is that the world is necessarily aware of plural and difference. Also many values which is focused on the previous generation, for instance disorganize of westernism, androcentrictrism, christianism and powerful nationalism, what is called unfamiliar, heterogeneous, the others and the circumference things. As these were rehabilitated, morality, ethics, religion or politics were all became possible to choose for one's taste. The pluralism expressed in modern fashion can be divided as collapse of genre, grafting the lower and higher orders cultivation, variety way of approaching in time, internationalism. The result for the consideration is that the pluralism has candid attitude for everything so that in the modern fashion is importing variety range of artistic definition. Namely, it is not only containing previous pure art, elegance art and element of artistic sublime beauty, but also has aesthetics of ugliness, deconstructive art and anti-fashion so that the definition of the art is getting vagueness and diverse.

"동의보감(東醫寶鑑)"에 쓰여진 허준(許浚) 문장(文章)의 문법적(文法的) 특성(特性)과 번역서(飜譯書)의 오류(誤謬) - "탕액편(湯液篇)"을 중심(中心)으로 - (Study on the grammatical characteristics and fallacy of translation in the sentences of Donguibogam by Heo Jun - Focused on Tangaekpean(湯液篇) in Donguibogam "東醫寶鑑" -)

  • 김용한;김은하
    • 대한한의학원전학회지
    • /
    • 제24권6호
    • /
    • pp.111-124
    • /
    • 2011
  • The objectives of this study are to look into the grammatical characteristics and find misinterpretations on the translation books. 1. Sentences characteristics 1) Lots of ellipses of grammatical parts can be found such as conjunction, postposition, particle, Coverb, and focus on the parts which has practical meaning such as noun, pronoun, verb, adjective in the sentences. 2) Some predicates are skipped in the later phrases which has contradictive concepts against them of former phrases. 3) Pure Korean word order is exposed especially in complement. 2. Translation fallacy 1) There is fallacy in the sentences omitted paratactic conjunction as follows (1) mistranslation based on the wrong concept of the context between equal relation and subordinate relation. (2) failure on setting up the period, (3) misunderstanding equal relation as cause relation. 2) Some singular phrases, which are condition relation, were analyzed as plural phrases in the sentences omitted connection conjunction. 3) Ellipses of postposition obstruct understanding the difference between modifier and modificand in some sentences. 4) Some cause relation phrases were translated as equality relation due to lack of recognition of ellipsis of coverbs.

극저온 선형 팽창기용 나선형 밸브의 구조 해석에 관한 연구 (A Study on the Structural Analysis of Spiral Valve for Cryogenic Linear Expander)

  • 윤소남;김지우;염한길;김효봉
    • 드라이브 ㆍ 컨트롤
    • /
    • 제12권4호
    • /
    • pp.1-7
    • /
    • 2015
  • In this study, a spiral valve which is used with a cryogenic linear expander and composed of plural plate coil shapes was examined. Generally, a spiral valve is well known for having excellent efficiency and low noise characteristics. In order to determine the movement characteristics and to investigate the limit of valve displacement, the stress variations according to the changes of operating pressure, displacement and workable temperature are discussed. From this examination, it is considered that the results of this study will significantly facilitate the design and development of a spiral valve for the cryogenic linear expander.

시각장애인 안내 시스템을 위한 복수 초음파센서 동시 조사에 의한 장애물 검색 (Object Search Using Synchronous Ultrasonic Wave Emission for the Blind Guide system)

  • 김창걸;송병섭
    • 대한의용생체공학회:의공학회지
    • /
    • 제29권5호
    • /
    • pp.384-391
    • /
    • 2008
  • For use in the guide system for the people who are visually impaired, an obstacle searching device using synchronous ultrasonic wave emission was proposed and developed. Generally, the conventional obstacle detection methods use the ultrasonic distance measuring device with successive scan method. However, the scan method causes a theoretical error and it couldn't estimate accurate obstacle distances. The proposed synchronous firing method use the plural number of ultrasonic sensors which emit ultrasonic wave simultaneously and estimate the distance to the closest obstacle relatively accurately. We analytically analyzed the errors of the conventional and proposed methods and compared the quantitative differences of the errors. The differences verified by obstacle search experiments. Using the proposed ultrasonic wave synchronous firing method, 3 dimensional obstacle location estimating device was designed and implemented. The results of the 3 dimensional obstacle detecting experiments showed the proposed method had good performances and it would be sufficiently use in the guide system for the people who are visually impaired.

Biomechanical Analysis of the Rotator Cuff Function During Elevation Motion in Scapula Plane using a Skeletal Muscle Model

  • Tanaka, Hiroshi;Nobuhara, Katsuya
    • 대한견주관절학회:학술대회논문집
    • /
    • 대한견주관절학회 2009년도 제17차 학술대회
    • /
    • pp.74-74
    • /
    • 2009
  • The purpose of this study was to estimate force of muscles that constituted the rotator cuff during elevation motion in scapula plane, using a skeletal muscle model and quantitatively evaluate rotator cuff function in vivo. A healthy volunteer was measured with an open MR and CT system at elevation positions in scapula plane (MR: $30^{\circ}$, $60^{\circ}$, $90^{\circ}$, $120^{\circ}$, $150^{\circ}$, CT: $0^{\circ}$). After reconstruction three-dimensional MRI-based and CT-based bone surface models, matched each models with registration technique. Then supraspinatus, infraspinatus, subscapularis, teres minor, deltoid (anterior, middle, posterior portions) represented as plural lines. These lines were proportional to physiologic cross-sectional area (PCSA) and defined straight line to bind origin and insertion. Force of supraspinatus became greatest at $59^{\circ}$ of elevation. Subsequently force of deltoid middle portion became greatest at $89^{\circ}$ of elevation. Infraspinatus and subscapularis were active at the meantime. In addition, supraspinatus was active during elevation. These results resembled clinical finding and were proved force couples that contribute to mobility and stability of shoulder complex.

  • PDF

Precision of predicted 3D numerical solutions of vortex-induced oscillation for bridge girders with span-wise varying geometry

  • Harada, Takehiko;Yoshimura, Takeshi;Tanaka, Takahisa;Mizuta, Yoji;Hashiguchi, Takafumi;Sudo, Makoto;Miyazaki, Masao
    • Wind and Structures
    • /
    • 제7권1호
    • /
    • pp.13-28
    • /
    • 2004
  • A method of numerical analysis without conducting 3D wind tunnel model tests was examined in our previous study for predicting vortex-induced oscillation of bridge girders with span-wise varying geometry. The aerodynamic damping forces measured for plural wind tunnel 2D models were used in the analysis. A further study was conducted to examine the precision of solution obtained by this method. First, the responses of vortex-induced oscillation of two rocking models and a taut-strip bridge girder model with span-wise varying geometry were measured. Next, the responses of these models were numerically analyzed by means of this method, and then a comparison was made between the obtained $Vr-A-{\delta}_a$ contour diagram of each 3D model in the wind tunnel test and the diagram in the numerical analysis. Since close correlations were observed between each two $Vr-A-{\delta}_a$diagrams obtained in the model test and in the analysis in cases where the 3D model did not have strong three-dimensionality, our findings revealed that the predicted solution proved to be reasonably accurate.

이액형 도장기기를 이용한 방식 도장 시 건도막두께 결정인자들에 대한 실험적 상관관계 연구 (A Study on the Experimental Relation between Parameters for Determining Dry Film Thickness in the Application of Anti Corrosive Paint using Hydraulic Plural Component)

  • 윤원준;최민규;이성균;이윤식;허병동
    • 대한조선학회논문집
    • /
    • 제49권5호
    • /
    • pp.433-439
    • /
    • 2012
  • Anticorrosive paint is the most widely used in shipbuilding and the dry film thickness is very important in terms of productivity and assurance of anticorrosive performance. However, it is difficult to achieve the recommended target film thickness because the dry film thickness depends on labor's skill in practice and is affected by a number of parameters, such as spray pressure, paint flow rate, tip size, spray distance, SVR(Solid Volume Ratio), etc. Present paper derives an empirical equation through the correlation analysis of parameters selected by spray experiments of anti corrosive painting in order to predict the coated status. Comparing the calculated results with practical data, we show that the empirical equation can successfully expect DFT(Dry Film Thickness).