• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.41-45
• /
• 2006

The study on laser-ablation plasmas has been strongly interested in fundamental aspects of laser-solid interaction and consequent plasma generation. In particular, this plasma has been widely used for the deposition of thin solid films and applied to the semiconductors and insulators. In this paper, we developed and discussed the generation of carbon ablation plasmas emitted by laser radiation on a solid target, graphite. The progress of carbon plasmas by laser-ablation was simulated using Monte-Carlo particle model under the pressures of vacuum, 1 Pa, 10 Pa and 66 Pa. At the results, carbon particles with low energy were deposited on the substrate as the pressure becomes higher. However, there was no difference of deposition distributions of carbon particles on the substrate regardless of the pressure.

• 환경영향평가
• /
• 제21권3호
• /
• pp.445-460
• /
• 2012

In order to evaluate and predict the environmental impact of the low-trophic-level ecosystem to environmental changes in the Yellow Sea and the East China Sea, an ecological modelling study was undertaken. Simulation results of average distribution patterns and concentrations of water quality factors during the summer by the model were acceptable. Phytoplankton and remineralization rate of organic matter were very important parameters by a sensitivity analysis. Water quality factors showed high values in the estuary of the Yangtze River and in the West and South Sea of Korea and low values in the central area of the Yellow Sea. There is a plume of high values, especially nutrients, off the mouth of the Yangtze that expands or contracts with changes in the discharge strength. Characteristics of responses of water quality factors vary for different scenarios of environmental change, such as land-based pollution sources and atmospheric forcing. It is suggested that changes of light intensity, discharges of input sources, and wind play an important role in the marine ecosystem.

• 한국산업보건학회지
• /
• 제21권1호
• /
• pp.1-10
• /
• 2011

Generally, the tire curing process is the process in which the sulfur is added and subsequently the tire is heated to give the tire elasticity. In this process, all kinds of the chemicals in the tire are emitted with a lot of heat. The chemical fume and heat aggravate the work environment. To solve this problem, 92 local exhaust ventilators and 8 gravity ventilators were used, but not satisfactory yet. Preliminary survey showed that the temperatures in the process were very high: 30.3, 32.9 and $37.2^{\circ}C$ at 2, 4 and 6m above the ground level, respectively in the winter (outside temperature was $2^{\circ}C$). It can be imagined that the process is severely hot in the summer time. The higher temperature distribution in the higher space tells us that the hot plume could not be removed with the existing ventilation systems. Therefore, in this study, some alternative ventilation systems were designed. The partitions were used to contain the hot plume to increase the capture efficiency. The gravity ventilators were newly designed to improve the extraction efficiency of hot fume. To satisfy the balance of pressure in the curing process, some supply air system was introduced by renewing the existing air conditioning system. Many alternative solutions were evaluated by using computational fluid dynamics modelling. The best and applicable solution was selected and the existing ventilation system was modified. After implementing the new ventilation system, the hot environment was much improved. The temperature reduction in the curing process was about $6.4^{\circ}C$.

• Journal of Radiation Protection and Research
• /
• 제29권3호
• /
• pp.157-163
• /
• 2004

원자력시설에서 만일의 방사성 물질의 누출이나 화학시설에서 독성물질의 누출시 오염물질의 환경 중 거동을 파악하기 위해서 대기확산 모형이 많이 이용된다. 대기확산 모형을 통한 환경 중 유해물질의 농도 예측에 대한 정확도를 높이기 위해서는 무엇보다 모형으로 입력되는 선원항에 대한 정확한 정보를 필요로 한다. 본 연구는 이러한 선원항 추정을 위하여 최소자승법을 적용하였다. 영광원자력 시설에서 실시된 추적자 확산실험 자료를 이용하여 가우시안 모형으로 계산한 값과 비교를 시도하였으며, 가우시안 모형으로 계산한 값들과 추적자 확산실험 결과 값들의 오차의 제곱이 최소가 되도록 선원항을 추정하였다. 추정한 선원항은 확산실험시 실제추적자 방출량의 1.24정도로 비교적 정확한 예측력을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.

• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.37-43
• /
• 2006

2006 년도에 호주 온실가스 기술에 대한 협력연구센터$(CO_2CRC)$는 채굴 후의 가스 저류층내에 $CO_2$를 저장하는 시험 연구의 수행을 계획하고 있다 (승인이 필요함). Otway Basiu Pilot Program (OBPP)은 지하 $CO_2$ 저장이 경제적이며 환경적으로 지속가능함을 보이는 것이 목표이다. 이는 $CO_2$ 저장 프로그램으로는 세계에서 처음으로 채굴 후 가스 저류층을 활용하는 것이므로 여기서 얻어질 경험은 현재 수행중이거나 계획중인 국제적 $CO_2$ 저장 프로그램에 귀중한 하나의 분야를 더할 것이다. OBPP의 중요한 요소는 주입된 $CO_2$ 의 거동을 추적하고 지하 저강이 성공적임을 입증하기 위해 적절한 지구물리학적 모니터링 전략의 설계이다. 이 논문은 Otway Basin 저류층에 $CO_2$를 주입할 때의 중력 반응을 예측하는 모델링 결과를 보여주며, 그 목적은 탄성파탐사가 아닌 물리탐사 방법으로 탐지가능한 최소 $CO_2$ 부피를 결정하는 데에 있다. 모델링 결과는 계산된 $CO_2$ 부피가 최소 10,000 ton 일 경우에도 기존 관측정과 계획된 주입정내에서 10 m 간격으로 중력을 측정하면 훌륭한 수직 해상도를 제공할 것임을 말해주나, 수평적인 연장에 대한 해상도는 더 좁은 간격의 추가 시추공이 없다면 불가능한 것으로 나타났다.

• Journal of Radiation Protection and Research
• /
• 제41권4호
• /
• pp.368-372
• /
• 2016

Background: Methodologies for a series of radiological consequence assessments show a distinctive difference according to the design principles of the original nuclear suppliers and their technical standards to be imposed. This is due to the uncertainties of the accidental source term, radionuclide behavior in the environment, and subsequent radiological dose. Both types of PWR and PHWR are operated in Korea. However, technical standards for evaluating atmospheric dispersion have been enacted based on the U.S. NRC's positions regardless of the reactor types. For this reason, it might cause a controversy between the licensor and licensee of a nuclear power plant. Materials and Methods: It was modelled under the framework of the NRC Regulatory Guide 1.145 for light-water reactors, reflecting the features of heavy-water reactors as specified in the Canadian National Standard and the modelling features in MACCS2, such as atmospheric diffusion coefficient, ground deposition, surface roughness, radioactive plume depletion, and exposure from ground deposition. Results and Discussion: An integrated accident consequence assessment code, ACCESS (Accident Consequence Assessment Code for Evaluating Site Suitability), was developed by taking into account the unique regulatory positions for reactor types under the framework of the current Korean technical standards. Field tracer experiments and hand calculations have been carried out for validation and verification of the models. Conclusion: The modelling approaches of ACCESS and its features are introduced, and its applicative results for a hypothetical accidental scenario are comprehensively discussed. In an applicative study, the predicted results by the light-water reactor assessment model were higher than those by other models in terms of total doses.

• 한국해양환경ㆍ에너지학회지
• /
• 제1권1호
• /
• pp.93-101
• /
• 1998

연안해역에서 해수순환과 오염물질의 확산과정을 연구하기 위해 수치모형이 널리 사용되어 왔으며, 최근에는 3차원 모형의 개발과 적용이 증가하고 있다. 연안해역에서 해수유동과 확산현상을 해석할 수 있는 3차원 수치모형을 수립하여 발전소 주변해역에서 해수유동과 온배수 문제에 적용하고 현장관측자료와 비교하였다. 수치모형은 실제 연안해역에서 유속분포와 수온분포를 비교적 정확히 재현하였다. 따라서, 수립된 모형은 연안해역의 해수유동 및 확산문제를 해석하는 데 널리 활용될 수 있을 것이다.