• Fibers and Polymers
• /
• 제3권1호
• /
• pp.1-7
• /
• 2002

Cellulose carbonate was prepared by the reaction of cellulose pulp and $CO_2$ with treatment reagents, such as aqueous $Zncl_2$ (20-40 wt%) solution, acetone or ethyl acetate, at -5-$0^{\circ}C$ and 30-40 bar ($CO_2$) for 2 hr. Among the treatment reagents, ethyl acetate was the most effective. Cellulose carbonate was dissolved in 10% sodium hydroxide solution containing zinc oxide up to 3 wt% at -5-$0^{\circ}C$. Intrinsic viscosities of raw cellulose and cellulose carbonate were measured with an Ubbelohde viscometer using 0.5 M cupriethylenediamine hydroxide (cuen) as a solvent at $20^{\circ}C$ according to ASTM D1795 method. The molecular weight of cellulose was rarely changed by carbonation. Solubility of cellulose carbonate was tested by optical microscopic observation, UV absorbance and viscosity measurement. Phase diagram of cellulose carbonate was obtained by combining the results of solubility evaluation. Maximum concentration of cellulose carbonate for soluble zone was increased with increasing zinc oxide content. Cellulose carbonate solution in good soluble zone was transparent and showed the lowest absorbance and the highest viscosity. The cellulose carbonate and its solution were stable in refrigerator (-$5^{\circ}C$ and atmospheric pressure).

• Fibers and Polymers
• /
• 제3권3호
• /
• pp.109-112
• /
• 2002

Polybutadiene(PB) was epoxidized to various extents with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. The thermal properties of the epoxidized PBs were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). As a result of epoxidation the glass transition temperature (Tg) of PB increased by approximately $0.8^{\circ}$ for each 1 mol% of epoxidation. The thermal decomposition of the epoxidised PBs occurred in two-step process, while that of PB exhibited apparent one-step degradation process.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.176-186
• /
• 1996

The phenomena of drag reduction using small quantities of a liner macromolecules has attracted the attention of many experimental investigations. On the other hand drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to flow with cavitation which occurs pump impellers. But the research on dragreduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction, mean liquid velocity and turbulent intensity whether polymer additives a horizontal single and two phase system or not. Flow pattern of air-water two phase flow was classified by electrical conductivity probe signal. Velocities and turbulent intensities of signal were measured simultaneously with a Hot-film anemometer.

• 대한소아치과학회지
• /
• 제46권2호
• /
• pp.190-199
• /
• 2019

인공우식 유발 용액 제조 방법 중의 하나인 White의 방법에 사용되는 $Carbopol^{(R)}$ 907의 생산이 최근 중단되면서, 그동안 사용되어 왔던 $Carbopol^{(R)}$ 907을 대체할 새로운 법랑질 보호제가 요구되게 되었다. 기존 White의 방법에 따라 $Carbopol^{(R)}$ 907을 사용하여 제조하고, 같은 방법으로 $Carbopol^{(R)}$ 2050을 사용하여 인공 탈회 용액을 제조한 후, 1일부터 20일까지 법랑질 표면에 인공우식을 유발시키고 편광현미경으로 관찰하여 병소 깊이의 변화와 우식 양상을 평가하였다. 편광 현미경 소견을 관찰한 결과, $Carbopol^{(R)}$ 907과 $Carbopol^{(R)}$ 2050을 사용한 탈회 용액으로 유발된 인공 우식은 자연 발생의 치아우식증과 매우 유사한 소견을 보였다. $Carbopol^{(R)}$ 907과 $Carbopol^{(R)}$ 2050을 사용한 탈회 용액으로 인공 우식을 유발한 영구치 법랑질 병소의 탈회 기간 경과에 따른 병소 깊이를 회귀 분석한 결과, $Carbopol^{(R)}$ 907을 사용한 경우는 회귀식이 Y = 8.4X - 0.4이었고, $Carbopol^{(R)}$ 2050을 사용한 경우는 회귀식이 Y = 9.8X + 8.0이었다. $Carbopol^{(R)}$ 907을 사용한 경우에 대한 회귀식의 R square 값은 0.945이었고, $Carbopol^{(R)}$ 2050을 사용한 경우는 R square 값이 0.965로 나타났다. 초기 법랑질 우식 병소 연구에 있어 인공 우식 유발 용액 제조시에 $Carbopol^{(R)}$ 2050을 사용한 경우가 $Carbopol^{(R)}$ 907를 사용한 경우보다 병소 깊이 증가가 더 빠르게 나타났으며, 회귀 분석 결과에서 R square 값이 0.965와 0.945로 나타나 탈회 기간과 병소 깊이가 매우 높은 상관관계를 가지고 있으며, 병소 깊이의 조절이 매우 용이하다고 사료되었다.