• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.29-37
• /
• 2010

Ramp metering control is the most representative strategy of uninterrupted flow control and management system. Ramp metering is to adjust vehicles entering an expressway in such a way that expressway mainline maintains flow stability by regulating ramp vehicles. The effect of two metering strategies, single-entry metering and platoon metering, on mainstream under the same metering rate with pre-timed metering are analyzed by micro-simulation. Platoon metering shows lower performance than single-entry metering under the same metering rate in terms of speed, density, and delay, causes earlier breakdown than single-entry metering. It indicates that the selection of metering type has critical importance as the flow of mainline is high.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.349-352
• /
• 1997

In this paper, we propose a new longitudinal controller of automated vehicles. The controller is designed based on a sliding control method, which is known to be robust to disturbances and modelling errors. Contrary to currently available sliding controller, a switching controller gain method is suggested. It is shown throughout simulations that the proposed controller reduces the amount of overshoot, which may derive smoother velocity tracking in a platoon.

• 연구논문집
• /
• s.24
• /
• pp.141-149
• /
• 1994

Recently, IVHS technology attracted public attention according as national IVHS project was initiated by SOC. In advanced countries, specially in USA, Europe, and Japan. IVHS technology was already studied for over ten years as national strategic project. In this paper we describe the concept and development trend of AVCS which is a part of IVHS technology. The important contents in AVCS are automatic collision warning and avoidance system, automatic intelligent cruise control system, automatic vehicle platoon control system, automatic lateral control system, etc.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.207-214
• /
• 2010

This paper proposes about decentralized control approach based Leader-Follower formation control using LOS (Line of Sight) algorithm and unknown input observer. The position of robots which is a basic information in multi-robot or single robot motion control is determined by localization algorithm fusing UPS (Ultrasonic Position System) and kinematics model. For formation control, a decentralized control approach individually installing a local controller in leader and follower robot is adopted. Leader robot is controlled to track a specified trajectory by LOS algorithm, and the other robots follow the leader by local controller based on tracking platoon level function, self-sensing data and estimated information from unknown input observer. The performance of proposed method is proven through the formation experiment of two vehicle models.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.23.5-23
• /
• 2001

This paper is concerned with the vehicle platooning in the AHS (Automated Highway Systems). For this, a relative navigation system is developed for the vehicles operating as a platoon. The relative navigation system is based on two sensors including GPS and MMWR (Millimeter-Wave Radar) and the federated Kalman Iter processing measurements of them. The architecture of this system requires GPS measurements of a preceding vehicle via communication link. Even if GPS measurements are available, they contain errors which are unacceptably high in vehicle platooning. Therefore, GPS carrier phase is considered. Integer ambiguities of GPS carrier phase measurements are determined by using MMWR ...

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.161-168
• /
• 2009

The ubiquitous transportation system environments make it possible to collect each vehicle's position and velocity data and to perform more sophisticated traffic flow management at individual vehicle or platoon level through V2V and V2I communication. It is necessary to develop a new traffic management paradigm to take advantage of the ubiquitous transportation system environments. This paper proposed a preventive congestion management algorithm for uninterrupted flow, whose goal is to minimize the incident potential and maximize the productivity by maintaining traffic flow stability. The algorithm includes the following steps: Processing the raw data to produce the 3-dimension speed/flow/density profile and to produce the platoon profile and the shock wave profile, Determining the traffic state and the flow stability based on the processed data, Deciding the desirable speed the according the traffic flow state, and finally Providing the desirable speed information. It remains as further work to perform field experiments and calibrate the algorithm parameters.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.179-186
• /
• 2008

It is crucial in traffic flow management to maintain productivity and the traffic stability at the same time especially under congested traffic conditions. This issue has not been explicitly addressed under the intelligent transportation system environments. However, the ubiquitous transportation system environments make it possible to collect the data for each vehicle's position and velocity and to perform more sophisticated traffic flow management at individual vehicle or platoon level through V2V and V2I communications. In this paper, a preventive traffic flow management scheme is proposed, in which the objective is to maintain traffic flow stability while the productivity of the system is not decreased. The management scheme is proposed based on Greenshield's model because it is simple and easy to handle. It is considered that further research should be performed to evaluate the various traffic flow models.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.427-428
• /
• 2016

본 논문은 차량 간 통신을 이용해 차량 간 거리를 줄임으로써 도로의 용량을 증가시키기 위한 효과적인 방법을 제공한다. 차량 간 거리는 차량의 제동능력에 의해 결정된다. 편대운항시스템의 차량 간 통신을 이용해 제동능력에 관련된 계수를 공유함으로써 서로간의 제동거리를 알 수 있다. 따라서 서로의 제동능력을 확인 후 차량 간 최소 거리를 측정하여 도로의 용량을 증가시킬 수 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.51-63
• /
• 2022

Convoy driving is one of the technologies of multi-vehicle cooperation driving along with platoon driving. All over the world, research on vehicle control mechanisms to maintain vehicle formation during convoy driving convoy driving has been actively conducted and in Europe's Autonet 2030 project has developed and demonstrated convoy driving services for highways. But, even the concept of convoy driving is still insufficient in Korea. Therefore, in this study, the concept of convoy driving service was established and scenarios and communication messages for service application on urban roads were developed. And its effectiveness was verified through simulation analysis. As a result of comparing and analyzing individual vehicle cooperative driving and convoy driving for the blind spot support service and dilemma zone safety support service, which are representative V2I cooperative driving services on urban roads, the number of conflicts(indicator of traffic safety) and delays and stops(indicator of traffic efficiency) are significantly improved in convoy driving compared to individual vehicle cooperative driving.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.185-196
• /
• 2007

The aim of this research is to develop a signal control algorithm using internal metering to minimize total delay that vehicles go through, in case a network is oversaturated. To calculate total delay on the network, the authors first detect vehicles' arrivals and departures in the network through the detecting system, and chase the vehicles' flow in the links with a platoon dispersion model. Following these, the authors calculate the queue length in all the inks of the network through the chase of vehicles, deduce the stopped time delay, and finally convert the stopped time delay to the approach delay with a time-space diagram. Based on this calculated delay, an algorithm that calculates the level of the internal metering necessary to minimize the deduced approach delay is suggested. To verify effectiveness of this suggested algorithm, the authors also conduct simulation with the micro-simulator VISSIM. The result of the simulation shows that the average delay per vehicle is 82.3 sec/veh and this delay is lower than COSMOS (89.9sec/veh) and TOD (99.1sec/veh). It is concluded that this new signal control algorithm suggested in this paper is more effective in controlling an oversaturated network.