Metalization technology of the fine patterns by electroless plating is required in place of electrodeposition as high-density printed boards(PCR) become indispensable with the miniaturization of electronic components. Electroless nickel plating is a suitable diffusion barrier between conductor meta1s, such as Al and Cu and solder is essetional in electronic packaging in order to sustain a long period of service. Moreover, Electroless nickel has particular characteristics including non-magnetic property, amorphous structure. wear resistance, corrosion protection and thermal stability In this study fundamental aspects of electroless nickel deposition were studied with effort of complexeing agents of different kinds. Then the property of electroless deposit are controlled by the composition of the deposition solution the deposition condition such as temperature and pH value and so on. the characteristics of the deposits has been carried out.
Various complexing agents were investigated to see the effects on the normal orientation of HCP structure of Co-alloy to the film plane in ammoniacal electroless plating bath. To obtain the optimum condition, several complexing agents were investigated to compare the C-axis perpendicular orientation. Results were that succinate - citrate, malonate - succinate, malonate bath were useful for that purpose. Among these complexing agents, succinate - citrate system was obtained as the best one. X-ray diffraction patterns were used to compare the film properties with C-axis perpendicular orientation.
2014년을 기준으로 도금폐수에 함유한 중금속중 니켈은 5 mg/L에서 3 mg/L로 방류수 기준이 강화되었다. 그러나 현재 적용되고 있는 도금폐수 중의 니켈 처리방법으로는 방류수 기준치 이하로 처리하기 어려워 대부분의 처리 업체에서 다른 폐수와 혼합하여 단순한 희석에 의해 농도를 낮추고 있는 실정이다. 이는 환경에 지대한 영향을 미칠 수 있으며 이에 따라 본 연구에서는 희생전극을 사용한 전기분해 방법을 적용하여 실질적이며 효율적인 니켈의 처리방법을 제시하였다. 실험은 인공폐수 및 실폐수로 수행하였으며 인공폐수 실험에서는 전기분해과정에서 니켈 제거 효율에 영향을 줄 수 있는 전류밀도와 pH를 변화시키며 최적의 효율을 나타내는 조건을 도출하였다. 실험결과 니켈 제거 효율은 94%를 상회하며 잔류니켈농도는 방류수 기준치 이하로 낮추고 철 슬러지 처리로 인한 경제성까지 고려한 조건으로 전류밀도 $1{\sim}2mA/cm^2$와 pH 9가 도출되었다. 이 처리 조건을 실폐수에 적용시켰을 때 니켈 제거 효율은 60~70%로 인공폐수 실험결과보다 제거효율이 낮게 조사되었다. 이는 실폐수에는 다른 중금속 및 음이온이 다량 함유되어 있어 처리 효율에 영향을 미친 것으로 판단된다. 실폐수의 경우 pH 9에서 전류밀도 $6{\sim}7mA/cm^2$ 조건으로 5분 동안 전기분해 처리를 하였을 때 니켈 제거효율 88% 이상, 처리수의 잔류 니켈 농도 3.0 mg/L 이하로 방류수 기준을 만족시킬 수 있었다.
합금박막형 자기기록매체의 제작방법은 스퍼터링과 무전해 도금방법이 주로 이용되고 있으며, 미국이나 일본 등에서는 스퍼터링 방법에 비하여 대량생산이 용이하고, 도금조건에 따라 다양한 특성의 합금박막을 제조할 수 있는 무전해 도금방법을 이용한 합금자성박막에 대하여 많은 연구를 하고 있지만 국내에서는 이에 관한 연구가 매우 미약한 실정이다. 따라서 이 연구에서는 차아인산이수소나트륨을 환원제로 사용한 무전해 도금법을 이용하여 corning glass 2948 유리기판 위에 Co-Mn-P 도금층은 석출전위에 따라 산성에서 석출되지 않고 알칼리성에서만 환원석출반응에 의해 형성되었으며, 석출속도는 pH와 온도가 증가할수록 상승하여 pH10, 온도 $80^{\circ}C$일 때 가장 우수하였다. 자기적 특성은 pH9, 온도 $70^{\circ}C$일 때 보자력 870Oe, 각형비 0.78로 가장 우수하였으며, 이 때, Co-P 도금층의 인(P)의 함량은 2.54%,두께는 $0.216\mu\textrm{m}$였다. 결정배향은 $\beta$-Co의 Fcc는 발견되지 않았고, $\alpha$-Co의 hcp(1010), (0002), (1011)방향의 결정배향을확인할 수 있었으며, (1010), (1011)방향이 우선 배향한 것으로 보아 수평자기벡터를 형성함을 확인할 수 있었다. 무전해 Co-Mn-P 도금층은 Co-P 도금층에 비해 보자력의 경우 100Oe 정도 증가하였지만, 각형비에 있어서는 큰 변화가 없었고, 결정배향 또는 Co-P 도금층과 마찬가지로 $\alpha$-Co (1010), (1011)방향이 우선 배향하여 수평자기벡터를 형성함을 확인할 수 있었다.2년경에 판매되는 단말기의 80%정도는 멀티모드타입 단말기일 것으로 예측되는 점, 그리고 금년말까지 100개 회사 이상이 SDR 포럼 멤버로 가입할 것으로 예측되는 점, 무선 인터넷 폭발적인 성장으로 복합 멀티미디어 단말기 시대가 다가오는 점 등으로 미루어 볼 때, 고객의 서비스 가치선택에 역점을 둔 기술을 중시해야 한다는 점에서 더욱 설득력을 지닌다. 따라서 이 같은 목적과 3세대 이동통신 및 인터넷 사용자의 증가, 반도체기술의 발전에 힘입어, 과거 군용 시스템에서 이용되던 SWR 기술을 상용시스템 특히 3세대 이동통신에 적용하려는 연구가 활발히 진행되고 있다. '96년 SDR 포럼이 결성되었는데, 목적은 휴대형 장치(hand-held devices), 기지국(base stations), 차량형 장치(mobile stations)를 포함하는 다중모드(multi-mode), 다중대역(multi-band) SDR을 위한 개방형 구조의 표준을 정하기 위함이다. 이 같이 public forum에 의한 표준(open architecture standard)이 정해지면 그 다음은 이를 어떻게 구현할 것인가가 문제가 될 것이다. 본고에서는 먼저 SDR 단말기 요구사항을 살펴보고, 이 요구사항들을 만족하는 SDR 단말기 구조, SDR 계층참조 모델, 그리고 기존의 단말기 구조와 SDR 계층참조 모델의 연관관계에 대해 살펴보고, 크게 두가지 종류의 단말기 즉 사용 SDR 단말기와 군용 SDR 단말기에 대해 살펴보고, 설계 절차 및 현재 시점에서 단말기 구현을 위해 해결해야 하는 기술적 과제를 살펴보고 결론을 언급한다.a^{2+}$ 통로를 자극함으로써 세포바깥의 $Ca^{2+}$이 세포안으로 이동하여 나타나는 변화로 생각된다.축력의 차이로부터 기인한다고
무전해 니켈 도금 산세 폐액을 강화된 니켈의 배출허용기준 3.0 mg/L 이하로 처리하기 위해서는 기존 처리방법의 단점을 보완한 처리방법의 개발이 필요하다. 용성전극 및 불용성전극을 이용한 전기분해 처리방법은 공통적으로 무전해 니켈 도금 산세 폐액을 효과적으로 처리할 수 있다. 그러나 용성전극은 전극으로부터 금속이 잘 용출되는 특징을 갖는 반면 불용성전극은 금속이 용출되지 않는 차이점을 갖고 있어 니켈 제거 효율 및 니켈 슬러지 순도에서 서로 다른 장단점이 존재한다. 이에 본 연구에서는 용성전극 및 불용성전극을 이용한 전기분해 방법으로 무전해 니켈 도금 산세 폐액을 처리하기 위한 최적조건을 도출하고, 두 전극을 이용한 방법의 장단점을 조사하였다. 실험결과 불용성전극을 사용하였을 때 처리수의 효율적인 니켈 제거를 위한 최적조건은 전류밀도 $15mA/cm^2$ 이상, pH 9 이상으로 도출되었고 이 조건에서 니켈 슬러지의 순도는 95.3%로 나타났으며, 슬러지 내 철 함량은 2.9%로 조사되었다. 용성전극을 사용하였을 때의 최적 조건은 전류밀도 $10mA/cm^2$ 이상, pH 9 이상으로 도출되었으며 최적조건에서 니켈 슬러지 순도는 77.3%, 슬러지 내 철 함량은 21.0%로 조사되었다. 처리비용을 기존의 처리비용과 비교하여 용성전극 사용시 50.7%, 불용성전극 사용시 24.2% 저감시킬 수 있는 것으로 조사되었다.
본 연구에서는 무전해 도금범으로 polyester film 상에 Co-Ni-P 박막을 석출시키고, pH, 온도 그리고 도금용액의 농도에 따른 도금속도 및 석출된 도금박막의 합금조성과 합금조성에 따른 자기적 특성을 고찰하였다. 무전해도금의 석출속도는 pH 8.5, 온도 90℃일때 가장 좋았으며, 자기적 특성도 이 때가 가장 좋았다. 합금조성은 pH와 착화제의 농도에 따라서는 크게 변화하였으나, 그 밖의 인자들에 의해서는 변화하지 않았다. 최적조건에서 만들어진 박막의 합금조성은 코발트가 78%, 니켈이 16%, 인이 6%였고, 보자력은 370 Oe, 각형비는 0.65였다. 박막은 합금조성에 따라 경질자성막과 연질자성막의 두가지 형태로 변화했고, 니켈이 30% 이상 공석(共席)되었을 때, 연질자성막으로 되었다. 연질자성막일때, 합금박막의 결정구조는 니켈이 강하게 배향된 비정질 형태를 나타냈고, 경질자성 막일때는, 코발트(101)과 (100)면으로 배향된 α-코발트의 hcp 결정구조를 나타내었다.
Nickel was plated electrolessly on 304L stainless steel powder. To obtain uniform coating and dispension of powder, the bath was continuously agitated with magnetic stirrer. The various pH and bath temperatures were studied. The conditions were in the range of $pH4{\sim}10$ and $45{\sim}65^{\circ}C$, respectively. The coating morphologies were examined by SEM/EDS tests. The optimum condition was pH9 at $55^{\circ}C$.
고속 동도금 공정을 확립하기 위하여 선행실험으로 알카리계 동도금 용액을 이용하여 고속 동도금의 가능성을 실험하였다. 전류밀도와 극간거리, 유속의 조절을 통하여 최대 $17.6{\mu}m/min$. 속도의 도금속도를 확보하였으며, Hv 120 내외의 경도를 확보하였다. 고속 동도금을 실현하기 위해서는 높은 전류밀도를 필요로 하고, 낮은 용액 저항을 위해 극간거리는 짧게 유지하되, 빠른 유속을 필요로 하였다.
The electric resistance and constant current were investigated on the nickel-thallium-phosphorus alloy deposits by electroless-plating. The Ni-Tl-P alloy deposits were achieved with a bath using sodium hypophosphit as the reducing agent and sodium citrate as the comlexing agent. The basic plating solution is composed of 0.1M NiSO$_4$, 0.005${\sim}$0.0IM Tl$_2$S0$_4$, 0.1${\sim}$O.2M sodium hypophosphite and 0.02${\sim}$O.IM sodium citrate and the plating condition were pH 5${\sim}$6, temperrature 80$_4$90${\circ}$C. The results obtained are summarized as follows: 1) The crystal structure of deposit was amorphous structure as deposited state, became microcrystallized centering on Ni(111) plane by heat treatment at 200${\circ}$C, and grew as polycrystalline Ni, Ni$_3$P, Ni$_5$p$_2$,Tl, etc. by heat treatment higher than 350${\circ}$C. The grain size of plated deposits was grown up to 28.3~42.0nm by heat treatment for 1hour at 500${\circ}$C. 2) The electrical resistivity showed a comparatively high value of 192.5$_4$208.3 ${\mu}$${\Omega}$Cm and its thermal stability was great with resistivity value less than 0.22% in the thermal surroundings of 200${\circ}$C. 3) Ni-Tl-P alloy deposit showed such good constant current-making-effect in the variation of electric voltage, heat treatment temperature, and the composition of the deposit that it can be put to practical use as the matter of constant current device.
This study aimed at helping to raise the reputation of Tteokgalbi for tourists visiting Damyang by studying the plating of Tteokgalbi. For 15 representative restaurants selling Tteokgalbi, we investigated the balance, blank, and proportions through studying the shape, material, and size of the dishes, and the number, shape, and garnish of one serving size of Teokgalbi. The results of our study suggested that round dishes (7 restaurants) and elliptical dishes (6 restaurants) similar to the shape of Teokgalbi are mainly used. For 13 out of 15 restaurants, the dishes were mainly casting pans in order to serve Tteokgalbi warm. The diameters of round dishes were 230 mm (3 restaurants), 265 mm (2 restaurants), and 300 mm (2 restaurants), and the elliptical dishes mostly had widths of 150 mm and lengths of 240 mm. The color of the dishes was N2-N3, similar to black, and N1, black of pale colors, because the dishes were mainly casting pans. The number of Teokgalbi per serving size was 3 in 12 restaurants. whole sesame was used most (7 restaurants) as a garnish. The results suggested that the color of the dishes and garnish could not imbue much distinction in the color of Tteokgalbi. In other words, Tteokgalbi is now served without consideration of the color, shape, size, or material of Tteokgalbi. The size of Tteokgalbi should be decided with consideration for the size of the dish and the amount of one serving size, and it is necessary to keep studying the process of making and garnish of Tteokgalbi.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.