• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.146-153
• /
• 2001

Radical development has been made in the every field of our society for the past scores of year. Radical development of industry and lining environment has mass-produced various toxic wastes . Which comes to the fore as a serious environmental problem. The purpose of this is to suggest the optima mix design by studying the utility of a toxic waste, plated sludge as a building material and deciding the standards of quality and use of cement and evaluating the properties of mortar and concrete in which plated sludge mixed. From an experiment, compressive strength required high early strength cement or special cement. Watertightness proved to be excellent. Heavy metals, such as Cd, Pb, Cu came out below an environmental standard. Cr+6 exceeded an environmental standard under a steam curing, but came out below an environmental under a standard curing. The higher replacement rate was, the lower frost, fusion and resistance were. Thus, got better results above the goal by condition. It was possible that plated sludge was replaced and solidified to aggregate. Therefore, it is necessary to define the standards of quality on strength, replacement rate of wastes, water permeability, endurance in other to solidify plated sludge to concrete products.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.207-210
• /
• 2004

Effect of electron accepters on anaerobic degradation of petroleum hydrocarbons by an anaerobic sludge taken from a sludge digestion tank in a soil artificially contaminated with 10,000 mg/kg soil of diesel fuel was tested. Treatments of soil with 30 mL of the digestion sludge (2,000 mg/L of vss (volatile suspended solids)) were incubated under several anaerobic conditions including nitrate reducing, sulfate reducing, methanogenic, and mixed electron accepters conditions for 120 days. Treatments with the digested sludge showed significant degradation of diesel fuel under all anaerobic conditions compare to control treatments with an autoclaved sludge and without the sludge. The amount of TPH degradation after 120days incubation was the largest in the treatment with the sludge and mixed electron accepters (75% removal of TPH) followed in order by sulfate reducing, nitrate reducing, methanegenic condition as 67%, 53％, 43%, respectively. However, the rate of TPH degradation in the nitrate- and sulfate reducing condition within 105 days were comparable with that of the mixed electron accepters condition. Microorganisms in each electron acceptor condition were plated on solid mediums containing nitrate or sulfate as sole electron acceptor and several nitrate- and sulfate reducing bacteria showed effective degradation of diesel fuel within 30 days incubations. These results suggest that anaerobic degradation of diesel fuel in soil with digested sludge is effective for practical remediation of soil contaminated with petroleum hydrocarbons.

• 자원리싸이클링
• /
• 제22권2호
• /
• pp.37-43
• /
• 2013

다이아몬드 입자를 전착한 와이어를 사용하여 실리콘 잉곳을 슬라이싱 하는 방식은 기존의 슬러리를 사용하는 방식과 달리 절단매체인 실리콘카바이드를 사용하지 않기 때문에 웨이퍼링 후에 발생하는 슬러지에 함유되어 있는 고형분의 대부분은 잉곳으로부터 분리되어 나온 실리콘 성분으로 구성되어 있다. 따라서 슬러지에 함유되어 있는 액상성분만 제거하여도 어렵지 않게 90% 이상의 순도를 가지는 실리콘을 회수할 수 있는 이점이 있다. 본 연구에서 다이아몬드 와이어 쏘잉 방식에서 배출된 슬러지로부터 오일 성분을 제거하여 고품위 실리콘 분말을 회수하였으며, 성형 및 소결공정을 통하여 실리콘에 포함되어 있는 유기물을 포함한 금속불순물을 제거하고, 미분체 실리콘의 산화가 용이한 점을 활용하여 열산화 공정으로 3N급 순도의 실리카를 제조하였다.

• 한국환경과학회지
• /
• 제29권11호
• /
• pp.1055-1064
• /
• 2020

In this research, heavy metals and T-P removal characteristics of plated wastewater are derived using BPC(Break Point Chlorination) process. AA sedimentation pond outflow(Influence) was evaluated for the removal efficiency of heavy metal(Ni) and T-P at a reaction time of 25 minutes by NaOCl input volume(9, 11, 13 and 15 mL). In the case, the higher the NaOCl input volumes, the higher the ORP values were maintained and the higher the removal efficiency tended to be. On the other hand, T-P was judged to have a low relationship between the ORP value and the removal efficiency. In addition, the efficiency of removal heavy metals and T-P in the plated wastewater by injecting 10 mL, 15 mL, 20 mL and 25 mL NaOCl, increased as the amount of NaOCl injected increased, the amount of NaOH input for pH increased. It was found that suspended solid in effluence also increased. It was also observed that the color of the plating wastewater changed from yellowish green to green to charcoal gray to black as the amount of NaOCl injected increased. Treatment characteristics of the reaction time, the longer the reaction time with the substance to be treated after the input of NaOCl, the more the heavy metal removal efficiency tended to increase. Through XRF analysis of the sludge, the constituents in the sludge such as NaCNO, CNCl, Na₃PO₄, CrO₄, 2Na₂CrO₄ and 2NaNO₃ will be analyzed in detail, and the mechanisms of the reaction between the plated wastewater and the complex compound will be elucidated.

• 한국표면공학회지
• /
• 제42권1호
• /
• pp.53-57
• /
• 2009

Recovery of heavy-metallic component from a waste solution of factory was undertaken by the solar cell electricity. The solution was obtained from an electrolytic etching process of 316L stainless steel. The electrolysis of the solution for recovery of heavy metallic components was made with platinum plated titanium mesh anode and copper plate cathode. Analysis for the solution and electro-winned materials were made by EDS, XRD and SEM. Iron, chromium, and sulfur components were recovered on the cathode from the solution. Result of EDS analysis for the electro-winned materials revealed that some metal oxide were contained in the recovered material. The recovered materials were expected to have metallic form only by the electrolysis, but metal compounds were contained because of weak solar cell power. Nickel and manganese component in the solution doesn't recovered by this electrolysis process, but they made a sludge with phosphoric acid in the solution.

• 한국축산식품학회지
• /
• 제36권6호
• /
• pp.779-786
• /
• 2016

This study aimed to evaluate the prevalence of Listeria monocytogenes on livestock farms in Korea and determine their serotypes and genetic correlations. Twenty-five livestock farms in Korea (central: 15, south west: 7, south east: 3) were visited 2-3 times, and 2,018 samples (feces: 677, soil: 680, silage: 647, sludge: 14) were collected. Samples were enriched in LEB (Listeria enrichment broth) and Fraser broth media, and then plated on Palcam agar. The isolates were identified by PCR and 16S rRNA gene sequencing. Then, the sero-types, presence of virulence genes (actA, inlA, inlB, plcB, and hlyA), and antibiotic resistance were determined. Genetic correlations among the isolates were evaluated by analyzing the restriction digest pattern with AscI. Of the 2,018 samples, only 3 (0.15%) soil samples (FI-1-FI-3) from 1 farm in the south east region were positive for L. monocytogenes. Based on biochemical tests and multiplex PCR, the serotype of the isolates were 4ab (FI-1 and FI-3) and 3a (FI-2), which are not common in foodborne L. monocytogenes. The 3a sero-type isolate was positive for all tested virulence genes, whereas the 4ab serotype isolates were only positive for hlyA, actA, and inlA. The isolates were resistant to all 12 tested antibiotics, especially FI-3. The genetic correlations among the isolates were 100% for those of the same serotype and 26.3% for those of different serotypes. These results indicate that the prevalence of L. monocytogenes on livestock farms in Korea is low; however, the isolates are pathogenic and antibiotic resistant.