• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1117-1125
• /
• 2013

후판압연 중에 발생하는 소재의 평면형상과 손실량을 정확하게 고찰할 수 있는 유한요소에 기초한 접근법을 제시한다. 압연의 패스 수가 증가함에 따른 소재의 선, 후단부의 형상을 연속적으로 모사할 수 있는 3 차원 유한요소모델을 도입하였다. 본 모델의 가장 큰 특징은 다단 압연을 할 수 있도록 롤 갭이 순차적으로 감소됨에 따라 소재의 압연 방향을 바꾸면서 중단 없이 해석 가능하다는데 있다. 유한요소해석에서 요구되는 재료상수는 열간 인장시험에 의해서 실험적으로 얻어졌다. 제시된 유한요소모델의 유용성을 입증하기 위해서 파이롯트 열간 판압연 시험을 실시하였다. 제시된 유한요소모델로 계산된 평면형상과 손실량이 판압연 시험에서 실제 측정된 양과 매우 잘 일치하는 결과를 얻었다. 제시된 모델로 예측한 손실량과 판압연 시험에서 측정한 양 사이의 오차는 5% 이하로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 2009

The roll gap set-up in the finishing mill is one of the most important technologies in the hot plate rolling process. As the target thickness can be obtained by the correct set-up of the roll gap, improving the roll gap set-up technology is very critical for plate thickness accuracy. The main cause of thickness variation in hot plate mills is the non-uniform temperature distribution along the length of the slab. The objective of this study is to adjust the roll gap set-up for the thickness accuracy of plate in hot rolling process considering top-end temperature drop. Therefore this study has concentrated on determining the correct amounts of roll gap to compensate thickness variation due to top-end temperature drop. The off-line simulation of compensated roil gap significantly decreases top-end thickness variation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.723-727
• /
• 2003

In this paper, two methods are discussed for good rolling force prediction in a plate mill. One is about the development of a long and a short learning scheme using a Neural Network for normal rolling and the other is about a mathematical model improvement by considering microstructural changes for controlled rolling. The research results are implemented in a on-line system of Pohang Works in POSCO and the field tests have showed that the prediction accuracies of rolling force are highly improved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.320-326
• /
• 1999

In the present investigation, recrystallization occurring during hot rolling of thick steel plate was predicted. The thermo-mechanical history of a material point was traced by the finite element method and the recrystallization was predicted by the Sellars equations. The investigation was performed for 4 different cases; two different pass schedules in conventional rolling and two different pass schedules in controller rolling. Variations of temperature, strain, strain rate and grain size were compared with each other. It was found out that the difference of grain size through thickness was more distinctive in the cases of controller rolling.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1437-1443
• /
• 2011

선박 건조를 위한 기본 자재인 후판은 압연공정을 통해 생산된다. 본 논문에서는 후판압연 중에 발생하는 폭방향 휨을 일으키는 비대칭 요인들을 제어할 수 있는 설정모델을 제시한다. 일련의 삼차원 유한요소해석을 통해서 휨과 비대칭 요인 사이의 관계를 예측한다. 그 관계를 무차원 변수로 이루어진 선형 방정식으로 수식화 시킴으로써 설정모델을 도출한다. 소재 폭방향으로 두께 편차와 온도차이가 있는 경우에 대해서 파이롯트 압연 시험으로 통해서 설정모델의 정도를 검증한다. 본 모델에 의해 예측된 휨 곡률이 각각의 비대칭 요인들에 의해 측정된 휨 곡률과 상당히 일치하는 결과를 보여 주었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.8-11
• /
• 2009

This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.376-385
• /
• 1991

본 연구에서는 그루브의 각도에 따라 그루브 에징을 한 형상과 상사하게 가상 의 슬라브를 제작하여 오버랩에 영향을 미치는 압연인자들을 분석하고 그 영향을 검토 함으로써 최적 G 롤의 각도를 결정하였고, 최적인 G 롤의 형상으로 에저를 제작하여 G 에징량에 따른 오버랩량의 변화를 고찰하였다.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2836-2844
• /
• 2000

Thickness control of hot-rolled strips has become an important issue in recent years because of the need for improving the quality of the hot-rolled strip. In this study, a modifying method of rolling force set-up with consideration of spread was developed to improve the thickness uniformity at the finishing rolling units in hot rolling. Through the analysis of real production data it was found that the accuracy of the rolling force determined from the finishing mill set-up (FSU) model dominantly governed the thickness uniformity in rolled plates at the front. Based on this analysis , several examples were selected to calculate the spread of rolled plate using three dimensional rigid thermo-viscoplastic finite element program. FE analysis results were used to train the neural network system that can predict the spread hot-rolled plate and the rolling force was modified based on the predicted value of spread. The modified rolling forces were closer to the measured rolling force so it can be expected that the accuracy of thickness uniformity of hot-rolled plate will be improved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.438-446
• /
• 1999

Crop minimization of the top and bottom ends of hot rolled plate, in a plate, in a plate mill, has been investigated. The existing model to determine the edging pattern at the finishing rolling pass was not reasonable to get high width accuracy and rolling yields. New models including width prediction have been formulated by using neural network model of back propagation learning algorithm and statistical analysis based on the actual production rolling data to give the optimal pattern for minimizing trimming loss. Using these models, at a given rolling condition of broadside pass and finishing pass and the permissible condition of width variation, it was possible to minimize crip at the top and bottom ends according to optimum procedure in plate mill. An application to improve the plan view pattern reduced width variation by 23% and crop length by 30% on average with an effective fishtail crop shape.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.283-292
• /
• 1999

Temperature prediction model was developed for on-line application to plate rolling mills of POSCO. The adequate boundary conditions of heat transfer coefficients were obtained by comparing the predicted temperature with the measured temperatures taken by measuring system in plate rolling mill of POSCO. In obtaining the boundary condition which minimize the mean and standard deviation of the difference between prediction and measurement, orthogonal array for experimental design was used to reduce the calculation time of large data set. To predict the temperature drop at four edge of plate in one dimensional model, the energy change by heat transfer though directions perpendicular to thickness direction was treated like that by deformation. And the heat transfer through four edge directions was inferred from that through thickness direction with two coefficients of depth and severity of temperature drop at the edge. The boundary condition for the depth and severity of temperature drop were also determined using the measured temperature.