• 제목/요약/키워드: Plate Crown

검색결과 47건 처리시간 0.027초

후판 압연에서 작업롤 초기 크라운 설정 (Establishment of Initial Work Roll Crown in Finishing Plate Mill)

  • 김종택;서재형;정병완
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 추계학술대회 논문집
    • /
    • pp.499-504
    • /
    • 1993
  • To find a way for establishing work roll initial crown according to roll conditions, computer simulation for predicting plate crown in plate mill is done and effects of roll conditions on plate crown is analysed. Roll gap profile and plate crown are measured to be compared to the calculated values. As a result,a regression equation to establish work roll initial crown according to roll cooditions such as backup roll diameter, backup roll crown and work roll crown is obtained.

  • PDF

후판 사상압연기 작업룰 초기 크라운 설정 (Establishment of Initial Work Roll Crown in Finishing Plate Mill)

  • 김종택;서재형;정병완
    • 한국정밀공학회지
    • /
    • 제12권3호
    • /
    • pp.73-81
    • /
    • 1995
  • To find a way for establishing work roll initial crown according to roll conditions, computer simutation for predicting plate crown in plate mill is done and effects of roll conditions on plate crown is analyzed. Toll gap rorfile and plate crown are measured to be compared to the calculated values. As a result, regression equation to establish work roll initial crown according to roll conditions such as backup roll diameter, backup roll crown and work roll diameter is obtained.

  • PDF

후판압연에서의 형상제어의 고도화 (HIGH LEVEL SHAPE CONTROL FOR PLATE ROLLING BY USING PAIR CROSS MILL)

  • 김영헌;남구원
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
    • /
    • pp.447-451
    • /
    • 1999
  • The plate crown and shape control of plate rolling has become important to obtain not only improved quality but also better yield of products and higher work ratio of rolling. Therefore, the development of a new plate crown and shape control system has been demanded in plate rolling mill. The 3rd Plate Rolling Works of POSCO introduced the new unique system

  • PDF

후판 형상제어 기술 (Crown and Flatness Control in Heavy Plate Mill)

  • 서재형;문창호;천명식;박해두
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2007년도 추계학술대회 논문집
    • /
    • pp.91-92
    • /
    • 2007
  • Control of crown and flatness in plate rolling is important not only for enhancement of the structural precision of products, but also for improving the yield and rolling operation. In the heavy plate mill, there have been strong demands for upgrading plate crown and flatness. In order to satisfy these demands, it is essential to develop the high precision numerical models. This paper gives a general description of the crown and flatness preset control model, work roll bender system, simulation result for shape control.

  • PDF

SmartCrown Roll Profile 형상에 따른 Work Roll과 Back-up Roll 접촉경계면의 응력해석 (Stress Analysis at the Contact Boundary between the Work Roll and the Back-up Roll for a SmartCrown Roll Profile Shape)

  • 송승호;김상록;김기원
    • 소성∙가공
    • /
    • 제24권3호
    • /
    • pp.212-217
    • /
    • 2015
  • SmartCrown is a system to control the plate crown by shifting the sine-shaped work rolls in the axial direction. The control range of the plate crown depends on a depth of sine-shaped roll profile because the roll radius varies continuously along the axial direction. When the roll profile is changed to improve the control range, the contact stress between the work roll and the back-up roll also changes. In the current study, the contact stress for various profiles and rolling conditions were analyzed using the finite element method and compared with results from Hertzian contact theory. A submodel method is used to increase the accuracy of the finite element analysis. The analysis results showed that the maximum increase in the contact stress was only 53MPa, so it is anticipated that no back-up roll spalling will occur.

백제 사비기 은화관식과 역삼각형 관식에 관한 연구 (A Study of the Flower-Shaped Silver Crown Ornament and Inverted Triangle-Shaped Crown Ornament of Baekje During the Sabi Period)

  • 권준희
    • 한국의류학회지
    • /
    • 제47권2호
    • /
    • pp.392-408
    • /
    • 2023
  • This study concerns the flower-shaped silver crown ornament and inverted triangle-shaped crown ornament of Baekje, which were worn frequently during the Sabi period. The purpose of this study is to present a new estimated shape of the crown and ornaments. Individual excavation cases and archaeological data were analyzed. The flower-shaped silver crown ornament appears as a thin silver plate with buds on the center and side branches and is symmetrically bent from the center to form a ∧ shape. The inverted triangle-shaped crown ornament resembles two right-angle triangles that are back-to-back. The crown to which the two ornaments were added appears to be a triangular crown that was made by covering birch bark of with fabric. Both ornaments were believed to have been located on the front of crown, but that is incorrect. The flower-shaped silver crown ornament was inserted on the front of the crown, and the inverted triangle-shaped crown ornament was fixed with a tip at the top of the crown and then obliquely on the crown's side. The inferred design was confirmed with real reproductions. This study is significant in that it identifies the crown of Baekje during the Sabi period.

Stainless steel crown을 위한 수종 시멘트의 접착력 비교 (A COMPARISON OF THE BOND STRENGTHS BETWEEN SOME CEMENTS AND STAINLESS STEEL MATERIAL)

  • 김홍렬;정태성;김신
    • 대한소아치과학회지
    • /
    • 제26권3호
    • /
    • pp.528-537
    • /
    • 1999
  • Stainless steel crown은 소아치과 영역에서 가장 효과적이면서 신뢰할 수 있는 수복방법으로 그 사용이 확대되는 추세이다. 선학들의 연구에 의하면, stainless steel crown의 장착에 있어서 시멘트를 사용한 경우가 사용하지 않은 경우보다 8배 이상의 유지력을 얻을 수 있으므로, stainless steel crown 시술에 있어서 시멘트는 중요한 부분이라고 할 수 있다. 본 연구는 stainless steel crown의 접착을 위하여 임상적으로 흔히 사용되는 인산아연 시멘트, 폴리카복실레이트 시멘트, 접착용 글래스 아이오노머 시멘트의 접착력을 비교분석 할 목적으로 시도되었다. 인산아연 시멘트로 FLECK'S, 폴리카복실레이트 시멘트로는 HY-Bond, 접착용 글래스 아이오노머 시멘트로는 Vitremer, stainless steel로는 Sun-Platinum plate를 사용하였다. Bovine teeth, 글래스 아이오노머 시멘트(Fuji II LC), 아말감(Valiant)상에 3종의 시멘트로 형성된 기둥을 세워 양자간의 접착력을 측정하였고, 한편으로는 stainless steel plate 상에 3종의 시멘트 기둥을 세워 또한 양자간의 인장접착 강도를 만능시험기로 측정하였다. 측정치를 ANOVA와 Student t-test로 통계 처리하여 다음과 같은 결과를 얻었다. 1. Stainless steel crown에 대해 글래스 아이오노머 시멘트와 폴리카복실레이트 시멘트가 인산아연 시멘트보다 높은 인장결합강도를 보였고, 글래스 아이오노머 시멘트와 폴리카복실레이트 시멘트 사이에는 차이가 없었다. 2. Bovine teeth와 수복용 글래스 아이오노머 시멘트에 대해서는, 접착용 글래스 아이오노머 시멘트가 가장 높은 인장결합강도를 보였고, 다음으로 폴리카복실레이트 시멘트와 인산아연 시멘트의 순이었다. 3. 아말감 수복재에 대해서는, 폴리카복실레이트 시멘트와 글래스 아이오노머 시멘트가 인산아연 시멘트보다 높은 인장결합강도를 보였고, 폴리카복실레이트 시멘트와 글래스 아이오노머 시멘트 사이에는 유의한 차이가 없었다.

  • PDF

후판압연에서의 고정도 형상제어기술 (Precision Shape Control in Plate Rolling)

  • 서재형;정병완;홍헌호
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
    • /
    • pp.452-456
    • /
    • 1999
  • Newly constructed plate shape control system, using attached shape measuring instruments and work roll bender, was put in service in No. 2 Plate Mill, POSCO. Recently, customers demand the improvement of flatness and plate crown accuracy. Many competition Plate Mill introducted shape control system, for example, pair cross mill, work roll bender which includes shape measuring instrument and shape control mathematical models, and No. 2 Plate Mill, POSCO introducted work roll bender and shape measuring instruments. This report describes the properties of No. 2 Plate Mill shape control system and work roll bender.

  • PDF

백제 관모에 사용된 직물 연구 (A Study of the Fabrics Used for the Official Hats in Baekje Dynasty)

  • 백윤미
    • 복식
    • /
    • 제59권3호
    • /
    • pp.82-95
    • /
    • 2009
  • The kind and the use of the fabrics for crown manufacture in the Baekje period has been studied by characterizing the imprinted fabrics on the crowns and the diadem ornaments from the old tomb. The contact region with the skin inside of the crown and the region between the bark of white birch and the gilt bronze openwork plates contained fabrics. The fabrics used in the gilt-bronze crown were all plain weave silk except that of Yongwonri tomb where loosely woven thin tabby was used. There have been 4-types of iron framed diadem of the Baekje, which comprise the inverted triangle-shaped diadem only with iron frame, the diadem with gold plate ornament in the iron frame, the diadem decorated with mica plate and gold plate, and the diadem with silver ornament in the iron frame. The fabrics used in the triangle shaped iron frame diadem include plain weave silk, irregular plain woven silk, thin tabby, complex silk gauze, twill weave on plain ground, and warp-faced compound weave. The iron frames were wrapped with the fabrics from one layer up to three layers, and the iron diadem was covered with one later of loosely woven textile such as irregular plain woven silk, thin tabby, and complex silk gauze. But in case of decorating the iron diadem with gold Plate ornaments, multiple layers of fabric were used to sustain the weight of the ornaments. The fabrics in the iron diadem frame were sewed with running stitch, overedge stitch or hemming stitch, diagonal hemming stitch, half back stitch), and overcast stitch.

판재의 편평도 향상을 위한 교차압연에 관한 연구 (A Study on the Cross Rolling for Improvement of Flatness of Plate)

  • 남경오;서기석;노병래;홍성인
    • 소성∙가공
    • /
    • 제14권1호
    • /
    • pp.43-48
    • /
    • 2005
  • The production of metal strip with uniform thickness and flatness are two important problems associated thin strip rolling. The thickness and flatness of strip are affected by the flattening of contact surface between strip and roll, the elastic recovery and the bending of roll. Especially, the flatness of the strip is greatly affected by bending deflection of roll. The roll must be designed considered the elastic deformation of roll. This study describes the measurement of thickness and flatness of strip and shows the crown roll for producing flat strip. But it is difficult to produce the crown roller. The cross rolling that is a simple method which can produce the flat strip is introduced and it is found the optimal cross angle for improvement of flatness of plate. These problems are solved by the MARC code on the basis of elastic-plastic material and the updated Lagrangian formulation.