• 미생물학회지
• /
• 제51권2호
• /
• pp.126-132
• /
• 2015

분변이 오염된 기저귀의 플라스틱과 펄프를 재활용하기 위해서 기저귀에서 분리된 플라스틱과 펄프의 세척, 기저귀의 직접 가열 살균 후 세척, 분리된 플라스틱과 펄프의 세척 후 가열 살균의 3가지 방법으로 플라스틱, 펄프 중의 대장균군과 일반세균의 저감화를 시도하였다. 기저귀를 10% $CaCl_2$과 4% 해수염 용액에 반응시킨 뒤 1,000 ml의 희석액을 투입한 후 체에 걸러 플라스틱과 펄프 시료를 분리하였다. 분리된 플라스틱, 펄프의 미생물의 저감화에는 3회 세척이 가장 적당하였으며 3회 세척 시 플라스틱과 펄프에 잔존하는 대장균군은 92.8%과 99.8%가 감소하였고 일반세균은 97.3%과 98.5%가 감소하였다. 사용된 기저귀에서 플라스틱과 펄프를 분리하지 않고 직접 기저귀를 살균한 후 플라스틱과 펄프를 분리하여 잔존 미생물수를 측정한 결과, $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$에서 12시간 동안 살균한 후 3회 세척 및 분리 과정을 거쳐 회수한 플라스틱과 펄프에서는 12시간 가열 후에도 $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$에서 각각 2-3 log CFU/g, 1-2 log CFU/g으로 일반세균이 검출되어 완전 사멸이 되지 않았다. 한편 분변 오염된 기저귀로부터 얻어진 플라스틱과 펄프를 3회 세척한 후 가열하는 경우 $80^{\circ}C$에서 4시간으로 완전 살균이 되었으며, 이 방법이 분리된 플라스틱과 펄프 중의 미생물의 저감화에 가장 적합한 방법으로 확인되었다.

• 소성∙가공
• /
• 제3권3호
• /
• pp.359-374
• /
• 1994

Process sequence design in sheet metal forming process by the finite element method is investigated. The forming of sheet metal into a washing machine container is used to demonstrate the design of an improved process sequence which has fewer operations. The design procedure makes extensive use of the finite element method which has simulation capabilities of elastic-plastic modeling. A one-stage process to make an initial blank to the final product is simulated to obtain information on metal flow requirements. Loading simulation for a conventional method is also performed to evaluate the design criteria which are uniform thickness distribution around the finished part and maximum punch load within limit of available press capacity. The newly designed sequence has two forming operations and can achieve net-shape manufacturing, while the conventional process sequence has three forming operations. This specific case conventional process sequence has three forming operations. This specific case can be considered for application of the method and for development of the sequence design methodology in general.

• Archives of Plastic Surgery
• /
• 제34권4호
• /
• pp.471-477
• /
• 2007

Purpose: Hydrofluoric acid(HF) is one of the most dangerous mineral acids with dissociated fluoride ions. As hydrofluoric acid is present in various household products(such as rust removers), a large population of industrials is at the risk of HF exposure. It is a very strong organic acid, used widely in glass etching, metal washing, and in the semiconductor industry. Even when using adequate safety measures, lack of care on the user's part results in chemical burn by HF. Symptoms caused by HF-induced chemical burns shows delayed manifestations resulting in a loss of proper treatment opportunities. We therefore reviewed 20 cases of HF-induced chemical burns and treatment principle. Methods: The objects of this study were 19 male patients and 1 female treated from March 2004 to March 2006. There were 19 cases of injury on digits and 1 on the wrist area. There were 15 cases of immediate treatment after sustaining HF-induced burns, and 5 cases of delayed treatment. As a principle, in the emergency treatment, partial or complete removal of the nail along with copious washing with normal saline was done, depending on the degree of HF invasion of the distal digital extremities. Results: The 15 cases who came to the hospital immediately after the injury were healed completely without sequelae, and those who delayed their treatment needed secondary surgical measures, due to the severity of inflammation and necrosis of the digital tissues. Conclusion: As the industrial sector develops, the use of HF is increasing more and more, leading to increase in incidences of HF-induced chemical burns. When treating chemical burns caused by HF, washing by copious amounts of normal saline, along with early removal of the nails, rather than calcium gluconate, seems to be a available method for preserving the shape and function of the digits and the nail. The education of patients regarding this subject should be empathized accordingly.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.35-40
• /
• 2017

PCR(Polymerase chain reaction) is a technique to replicate and amplify a desired part of DNA. It is used in various aspects such as DNA fingerprint analysis and rare DNA amplification of an extinct animal. Especially in the medical diagnosis field, it provides various measurement methods at the molecular level such as genetic diagnosis, and is a basic tool for molecular diagnostics. The internal shape of the plastic vial tube for PCR analysis used in the DNA detection process, and the surface roughness and internal cleanliness can affect detection and discrimination results. The plastic vial tube demanded by the developer of the PCR analysis equipment should be changed to a structure that eliminates the residual washing solution in the washing process to ensure the internal cleanliness. Thus the internal structure and the internal surface design for improving the PCR amplification efficiency are key issues to develop the plastic vial tube for the DNA detection process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.107-117
• /
• 1994

A design methodology is applied for manufacturing a disk-brake piston component and a washing machine container. The design criteria are the limit drawing ratio and the forging load within the available press limit. Also, the final product should not have any geometrical defect. The rigid-plastic and elastic-plastic FEM have been applied to simulate both of the conventional manufacturing processes, respectively, which include deep drawing and forging process. Simulations of one stage process from a selected stock to the final product shape are performed for generating information on additional requirements for metal flow. The best manufacturing processes are selected, which is using a hemispherical punch in the deep drawing process for both disk-brake piston component and washing machine container.

• Environmental Analysis Health and Toxicology
• /
• 제7권1_2호
• /
• pp.67-87
• /
• 1992

Each detergent-solution in the concentration of 0.4% was prepared with four kinds of raw materials of detergents and two kinds of commercial surfactants for kitchen. LAS (Linear Alkyl Benzene Sulfonate), AOS ($\alpha$-O1effine Sulfonate), SLS (Sodium Lauryl Sulfonate) and SLE (Sodium Lauryl Ester Sulfonate) were used as the raw materials. Vegetables and fruits such as cucumber, crown daisy, lettuce, strawberry and tomatos were diped in each solution and washed 5 times in static or flow state. For the other experiments, tablewares such as porcelain, stainless bowls, glass and plastic cups were diped in each solution and washed also 5 times with cold and hot water in static or flow state. The residues of the detergents on the every steps of wash-conditions were measured. The results of this study were summarized as followings: 1. The residures of the detergents on the tested vegetables and fruits after 5 times washing were detected with the range from 0.450 to 7.120 ppm in static state and from 0.343 to 6.375 ppm in flow state. 2. The residures of the detergents on the tested tablewares after 5 times washing with cold water were observed with the range from 0.057 to 0.815 ppm in static state and from 0.066 to 0.905 ppm in flow state. 4. The residures of the detergents on the tested tablewares after 5 times washing with hot water were determined with the range from 0.061 to 0.424 ppm in static state and from 0.066 to 0.368 ppm in flow state. 4. Independent on detergent types, water temperatures and washing methods, the detergents were remained stablely on the porcelain; 0.057~0.815 ppm, on the stainless bowl; 0.061~0.905 ppm, on the glass cup; 0.0l4~0.592 ppm and on the plastic cup; 0.201~0.592 ppm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.543-548
• /
• 2013

이 논문은 세탁기의 진동제어를 위한 MR 댐퍼의 설계과정을 제시한다. 이 연구에서는 MR 댐퍼의 작은 크기와 함께 높은 댐핑력과 저전력을 소비하도록 설계되었다. MR 댐퍼는 전단모드를 사용하도록 제안되었고 빙햄모델을 이용하여 최설설계를 진행하였다. 이 과정에서 멀티코일이 댐핑력을 높이기 위해 적용되었고 최적화된 구조를 찾아내기 위하여 APDL을 이용하여 최적설계가 수행되었다. 이 후 최적의 수치 값들을 통해 제작하여 실험을 수행하였다. 이 때 슬라이딩모드 제어기를 적용하여 시뮬레이션과 제어실험을 모두 수행하였다. 실험의 결과로부터 MR 댐퍼가 세탁기의 진동제어를 위한 요구 댐핑력을 만족시켜줌을 확인하였다.

• 한국생활과학회지
• /
• 제19권1호
• /
• pp.167-177
• /
• 2010

This study examined consumer perception and use on labeling of cooking utensils made of plastic and glass to get information about improving the labeling. The data were collected from 505 adults in Seoul, Busan, Daegu, Daejeon, Incheon, and Gwangju. The data were analyzed by SPSS Windows V.14.0. Frequencies, t tests, one-way analysis of variance, and Duncan's multiple range tests were carried out. Many respondents checked off 'precautions in use' more than any other notice when they purchased the cooking utensils made of plastic and glass. Respondents were dissatisfied with the letter size and intelligibility of foreign language on the labeling. Most respondents preferred 'tag' for most cooking utensils made of plastic and glass. In addition, on necessity of precautions for each category of plastic cooking utensils, frying pans, plastic baskets, plastic water buckets, plastic seasoning bottles, the frying pan showed the highest need for 'do not place close to the fire'. Plastic cups and plastic containers showed the highest in 'whether utensils could be used in the microwave oven and accompanying precautions', and plastic cutting board showed the highest in 'matters relating to washing before use.' In the case of cooking utensils made of glass, 'precaution on shock' was the highest for glass cups and mugs and 'whether utensils could be used in the microwave oven and accompanying precautions' was the highest for glass pans, dishes and containers.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.127-131
• /
• 2006

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that Press-joining Strength of Spin Drum Seaming division is improved .to attain that target. Generally, we are using Mechanical press-joining by Seaming and T.I.G (Tungsten Inert Gas) welding among part joint method. Mechanical press-joining method that is mainly using for Stainless Steel (STS430) Drum have lots of merit that consumption of energy is low more than welding and production costs cut down and generation of the corrosion is solved by removing weld zone defect and materials having different properties are enable to join without special equipment. But, it is difficult to realize joint strength required at high speed operation because joint strength of mechanical press-joining method is low remarkably in comparison with welding. Also, there are a lot of analysis difficulties and very limited research is under way due to the dynamic factor such as multistage plastic working, elastic recovery, residual stress etc. The results of this study show optimal joining condition for mechanical press-joining by performing lots of tensile joining strength test with various specimen under multi-change of important design factor such as seaming width, bead area and bead depth etc.

• 한국환경과학회지
• /
• 제32권11호
• /
• pp.745-756
• /
• 2023

Growing stringent global regulations in Korea poses a threat to corporate sustainability. Companies must respond strategically to navigate these regulations and avoid greenwashing. Objective of this research was to analyze how Korean companies are responding to the global trend of reducing plastic use and propose improved management strategies. Seven indicators were developed to assess companies' post-plastic strategies and applied to analyze the sustainability reports of Amore Pacific and LG Household & HealthCare. These indicators included, 1) disclosure of plastic raw materials used by weight or volume, 2) disclosure of recycled plastic raw materials used by weight or volume, 3) disclosure of waste recycling, reuse amounts, and disposal using waste treatment method 4) strategies to reduce environmental impact of plastics, 5) plastic packaging, reduce, recycle, reuse, and composting (in the real environment), 6) plastic management roadmap for the circular economy, and 7) education for sustainable plastic management. Based on the review of considered companies, we propose in-listed sustainable plastics management strategies: disclosing the ratio of plastic raw materials and recycled raw materials for all products, considering recycling rate throughout the product value chain, and not only for the production phase, reviewing carbon dioxide emissions based on life cycle assessment rather than reducing plastic consumption, studying the biodegradability of biodegradable plastics in natural environment such as soil, considering the consumer's perspective.