• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.289-295
• /
• 2010

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. Today, injection molded parts have been increased dramatically the demand for high strength and quality applications. In this study, In-line skates are made of Al alloy and plastic materials to replace the frame for the optimization process is all about. I interpreted through mold design, Injection molding process that minimizes the runner and the gate dimension will determine the size and shape. Runner and gate dimensions of change based on availability of the product, I'll discuss the injection molding. This report investigates that the optimum injection molding condition for minimum of shrinkage. The FEM Simulation CAE tool, Moldflow, is used for the analysis of injection molding process.

• The Plant Pathology Journal
• /
• v.17 no.3
• /
• pp.184-188
• /
• 2001

Phytophthora-induced diseases on citrus in Jeju island have been considered of minor importance because of the use as root stock of trifoliate orange, which is immune to Phytophthora. However, brown rot on fruit, which severely occurred in 1998 and 1999, has become a great threat to citrus production in the island. About one-half of the surveyed orchards were infected in 1998 and 4 out of 19 infected fields showed over 20% fruit infection rate. The disease was less severe in 1999, with an estimated infected area and total fruit reduction of 3,155 ha and 15,300 tons, respectively. Typical gummosis was also occasionally observed on cv. Shiranugi, which is mostly cultivated under plastic film houses. Two types of Phytophthora were consistently isolated from various plant parts, identified as P. citrophthora and P. nicotianae. The former was isolated from the aerial parts of the fruit, young leaf, and shoot in the fields. Meanwhile, the latter was only isolated from the basal stem showing gummosis in plastic film houses.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.79-86
• /
• 2010

The environment-friendly abrasive materials of starch series has a wide range of application value such as deburring of plastic injection products, paint exfoliation and surface treatment of painted products and polishing, etc. In this study, an experiment of paint exfoliation was performed by using the environment-friendly abrasive materials made of cheap starch, and its performance was reviewed. By adjusting the grit size of abrasive materials, nozzle pressure, nozzle feed and number of nozzle repetition, paint could be exfoliated effectively. In this experiment, it was found that the most suitable condition was grit size 0.75~1.0 mm, nozzle pressure 0.4 MPa, nozzle feed 5 mm/min and number of processing repetition 2 times.

• Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.48-54
• /
• 2014

In this paper, the authors propose a system for assisting mold designers of plastic parts. With a CAD model of a part, the system automatically determines the optimal ejecting direction of the part with minimum undercuts. Since plastic parts are generally very thin, many rib features are placed on the inner side of the part to give sufficient structural strength. Our system extracts the rib features from the CAD model of the part, and determines the possible ejecting directions based on the geometric properties of the features. The system then selects the optimal direction with minimum undercuts. Possible ejecting directions are represented as discrete points on a Gauss map. Our new point distribution method for the Gauss map is based on the concept of the architectural geodesic dome. A hierarchical structure is also introduced in the point distribution, with a higher level "rough" Gauss map with rather sparse point distribution and another lower level "fine" Gauss map with much denser point distribution. A system is implemented and computational experiments are performed. Our system requires less than 10 seconds to determine the optimal ejecting direction of a CAD model with more than 1 million polygons.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.111-112
• /
• 2006

Injection molding of corrosive super engineering plastics and engineering plastics with various fillers is conducted under severe conditions and causes corrosion and wear problems. We have developed $Mo_2NiB_2$ boride base cermets, which have excellent corrosion-and wear-resistances, and tried to apply them into plastic molding machine parts. In this paper, the effects of V substitution for Cr on the mechanical properties, corrosion resistance and microstructure of Ni-5.0B-51.0Mo-(17.5-X)Cr-XV (mass%) model cermets were investigated. Both transverse rupture strength (TRS) and hardness increased monotonically with increasing V content and reached 2.94GPa and $87.2R_A$ at 10.0%V, respectively. The improvements of TRS and hardness were attributed to microstructural refinement.

• Journal of Welding and Joining
• /
• v.5 no.3
• /
• pp.46-52
• /
• 1987

The mechanism of transverse shrinkage for the butt joint weldig of plates is investigated in this paper. It was certified that the compressive plastic strain due to thermal expansion of materials during heating play an important role on the transverse shrinkage. It was also pointed out that the transverse shrinkage has to be treated with the samples of which the shapes are as close to real shapes of welded materials as possible, because the distribution of temperature and relative rigidity of materials during welding have great influence on the transverse shrinkage. The formulas for the calculation of transverse shrinkage were presented and the experiments were carried out in order to verify the formulas. the main results are as follows; 1. For the bead-on-plate welding, the transverse shrinkage in the begining parts of welding is the smallest, the end parts is next and the transverse shrinkage of mid section is the largest. 2. In bead-on-plate welding, the equations presented in this paper concerning transverse shrinkage coincide fairly well with the experimental values generally. 3. Transverse shrinkage increases generally as specific heat input per unit thickness increaes.

• Korean Journal of Plant Resources
• /
• v.24 no.5
• /
• pp.613-621
• /
• 2011

Plastic house and laboratory experiments were conducted to determine the effects of substrate components and shade degrees on plant growth and physiologically-active substance content and antioxidant activity of Panax ginseng. No significant difference in growth characteristics among substrates was observed. However, shade treatment also significantly reduced leaf area, chlorophyll content, root length, and shoot and root fresh weight (P<0.05) with increasing of the degree. Total phenolics level [mg ferulic acid equivalents (FAE) $kg^{-1}$ DW] was higher in root parts (25.8 to 28.4 mg $kg^{-1}$) than shoot parts (20.7 to 23.8 mg $kg^{-1}$) of Panax ginseng, and with shade (23.7 to 28.4 mg $kg^{-1}$) than without shade (20.7 to 25.8 mg $kg^{-1}$). However, total flavonoids [mg naringin equivalents $kg^{-1}$ DW] was more detected in the shoot part (17.4 to 26.8 mg $kg^{-1}$) than in the root part (6.7 to 7.0 mg $kg^{-1}$) of Panax ginseng. Methanol extracts from the Panax ginseng plants dose-dependently increased DPPH free radical scavenging activity as a antioxidant potential, and the activity was higher in shoot parts (31.1 to 36.5%) than in root parts (24.9 to 28.7%), and without shade than with shade. In conclusion, shade affects plant growth as well as physiological activity of Panax ginseng under plastic house condition.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.708-711
• /
• 2010

Purpose: The sheath of tendon is uncommon site of tuberculous involvement as compared to other parts of the body. Especially, tuberculous tenosynovitis affecting flexor tendon of the hand is a rare condition. In recent years, furthermore, the incidence of tuberculosis is increasing in our country. Tuberculous tenosynovitis is a chronic, slowly destructive disease, which is difficult to diagnosis before operation, but can be definitively diagnosed by the pathologic microscopic examination. Early detection and surgical excision combined with antituberculous medication is important. We report a rare case of tuberculous tenosynovitis of the flexor tendon of the hand. Method: A 12-year-old woman presented with a painless, nontender mass on palmar side between distal interphalangeal joint and proximal area of metacarpophalangeal joint of the left third finger. We had surgical excision of the involved flexor tendon sheath and studied histopathologically. Result: The histopathological findings were chronic granulomatous inflammation with caseating necrosis consistent with tuberculosis. We started antituberculous medication. Conclusion: Tuberculous tenosynovitis is a rare condition, especially involving on the flexor tendon of the hand. But because of increasing tendency of tuberculosis, it is important to differentiate it from other tumors of the hand.

• Earthquakes and Structures
• /
• v.19 no.3
• /
• pp.175-188
• /
• 2020

The Hengda Group super high-rise building in Jinan City uses the frame-core tube structural system. With a height of 238.3 m, it is above the B-level height limit of 150 m for buildings within 7-magnitude seismic fortification zones. Therefore, it is necessary to apply performance-based seismic design to this super high-rise building. In this study, response spectrum analysis and comparative analysis of the structure are conducted using two software applications. Moreover, elastic time-history analysis, seismic analysis under an intermediate earthquake, and elastic-plastic time-history analysis under rare earthquakes are performed. Based on the analysis results, corresponding strengthening measures are implemented at weaker structural locations, such as corners, wall ends connected to framed girders, and coupling beams connected to framed girders. The failure mode and failure zone of major stress components of the structure under rare earthquakes are analysed. The conclusions to this research demonstrate that weaker locations and important parts of the structure satisfy the requirements for elastic-plastic deformation in the event of rare earthquakes.

• Transactions of Materials Processing
• /
• v.15 no.4 s.85
• /
• pp.311-318
• /
• 2006

One of the most important quality problems in flat plate leveled from hot rolled coils in cut-to-Iength lines is bowing and cambering when they are cut in small width parts. It is verified analytically and experimentally that residual stress remained in plate is th ε source of the problem. In order to produce low residual stress flat plate from hot rolled coils, the proper conditions of leveling are studied and two things are implemented. One is proper plastic deformation area ratio to reduce residual stress within customer requirement by applying suitable plastic deformation and maintain leveling load within structural strength limit of leveler. The other is maintaining uniform plastic deformation along the width of the plate during leveling. Customer requirement for residual stress is met by applying above 70% of plastic deformation area ratio and uniform deformation along width of coil by adjusting back up rolls according to deformation analysis of work roll and back up roll assembly and leveling tests.