• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권3호
• /
• pp.173-179
• /
• 2012

Purpose: This study was to determine the effects of surgical induction of anterior disc displacement (ADD) on the distribution of glycosaminoglycan (GAG) and collagen fiber arrangement in the rabbit temporomandibular joint (TMJ) tissues including articular cartilage of condyle, disc, retrodiscal tissue, and articular eminence. Methods: We used van Gieson staining and Alcian blue critical electrolyte concentration (CEC) method to observe change of collagen fibers on disc and to measure GAG up to 10 weeks in TMJ tissues after surgical induction of ADD on 25 rabbits. Results: CEC measurements for GAG showed 0.3 M, 0.4 M, 0.6 M, and 0.8 M at 1 week, 2 weeks, 3, 4, and 8 weeks, 10 weeks, respectively. This result indicated that GAGs shifted to highly sulphated ones as time passed. Disruption of collagen fiber arrangement in the disk occurred at 10 days and aggravated at 3 weeks. Conclusion: Our study showed degenerative osteoarthritis changes in rabbit TMJ following surgical induction of ADD up to 10-week period.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.181-184
• /
• 2008

오스테나이트 계열 스테인리스강의 경우 뛰어난 내열성으로 인해 가스 터빈 블레이드나 디스코 등으로 많이 사용되고 있다. 본 연구에서는 터빈 블레이드로 사용되는 316 스테인리스강의 고온 인장 및 저주기 피로 물성을 실험적으로 구하였다. 실험 결과 탄성계수와 항복강도, 최대인장강도 모두 온도 증가에 따라 감소하는 것으로 확인되었다. 소성변형률 진폭, 소성변형률 에너지 등의 인자들이 피로파괴에 미치는 영향도 조사하였다. 실험을 통해 얻어진 고온 인장 물성을 이용하여 316 스테인리스강으로 제작된 가스터빈 블레이드의 구조해석을 수행하였다.

• Archives of Plastic Surgery
• /
• 제37권3호
• /
• pp.213-219
• /
• 2010

Purpose: Iodine has been used for the prevention or management of wound infection as a topical agent. Although iodine was widely used mainly by Betadine$^{(R)}$ and cadexomer iodine, there was no comparative study on the efficacies of dressing methods of iodine. And also it's wound healing effect was not yet clear. The purpose of this study is to compare antibacterial effects and wound healing effects associated with various dressing methods of iodine on infected full thickness skin defect in the mouse. Methods: One full thickness skin defects in the mice (n=60) were developed on the back and left open for twenty-four hours. Sixty mice were divided into four groups : group S (dressing with Betadine$^{(R)}$ soaking, n=15), group T (dressing with Betadine$^{(R)}$ topping, n=15), group I (dressing with Iodosorb$^{(R)}$, n=15), group G (control group, dressing with dry gauze, n=15). The size of the wound defects and the grades of wound healing were evaluated in 4, 7, 10 days, and antibacterial effect was evaluated with restricted zone in Mueller Hinton agar by disk diffusion method. Results: After the wound was left open for twenty-four hours, many Staphylococcus aureus were cultured. The wound defect size was decreased in order of Betadine$^{(R)}$ soaking, Iodosorb$^{(R)}$, Betadine$^{(R)}$ topping and gauze dressing group in all days, but difference among experimental groups was not statistically significant. The grade score of wound healing was increased in order of Betadine$^{(R)}$ soaking, Iodosorb$^{(R)}$, Betadine$^{(R)}$ topping and gauze dressing group, and the difference was statistically significant. Antibacterial effect for S. aureus was increased in order of Iodosorb$^{(R)}$, Betadine$^{(R)}$ soaking, Betadine$^{(R)}$ topping and gauze dressing group, and the difference was statistically significant. Conclusion: Selection of the effective dressing method of iodine for infected wounds remains a controversial decision. According to this study, Iodosorb$^{(R)}$ may be most effective method for antibacterial effect and Betadine$^{(R)}$ soaking may be most effective method for infected wound healing. However, further study is necessary to evaluate the clinical efficacy of dressing methods of iodine and to search for the mechanisms that explain their effects.

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.115-121
• /
• 2010

Purpose: Many topical agents had been used for contaminated wound treatment. Although antimicrobial ointments were widely used as topical agents, their comparative antibacterial and wound healing effects were largely unreported. The purpose of this study was to compare antibacterial effects and wound healing effects of common topical ointments on infected full thickness skin defect in the mouse. Methods: One full thickness skin defects in the mice (n=60) were developed on the back and left open for twenty-four hours. Sixty mice were divided into four groups: group B (dressing with Bactroban$^{(R)}$, n=15), group I (dressing with Iodosorb$^{(R)}$, n=15), group T (dressing with Terramycin$^{(R)}$, n=15), group G (control group, dressing with dry gauze, n=15). The size of wound defects and the grades of wound healing were evaluated at 4, 7, 10 days, and antibacterial effect was evaluated with restricted zone in Mueller Hinton agar by disk diffusion method. After the wound was left open for twenty-four hours, many Staphylococcus aureus was cultured. The wound defect size was decreased in order of Bactroban$^{(R)}$ (B), Iodosorb$^{(R)}$ (I), Terramycin$^{(R)}$ and gauze dressing group in all days, but difference among experimental groups was not statistically significant. The grade score of wound healing was increased in order of Bactroban$^{(R)}$, Iodosorb$^{(R)}$, Terramycin$^{(R)}$ and gauze dressing group, and the difference was statistically significant. Antibacterial effect for was increased in order of Bactroban$^{(R)}$, Iodosorb$^{(R)}$, Terramycin$^{(R)}$ and gauze dressing group, and the difference was statistically significant. Conclusion: Topical antimicrobial ointments application was effective against wound infections by S. aureus. Bactroban$^{(R)}$ may be an optimal topical treatment for infected wounds according to this study. However, further study is necessary to evaluate the clinical efficacy of antimicrobial ointments and to search for the mechanisms that explain their effects.

• Journal of Radiation Protection and Research
• /
• 제10권2호
• /
• pp.96-108
• /
• 1985

감마선분광분석 및 열형광선량측정법에 의한 자연환경방사선의 선량해석에 관한 연구를 1984년 10월부터 약 1년간에 걸쳐 충남대학교 대덕캠퍼스내의 1만 $m^2$ 규모의 평면개활지에서 수행하였다. 이 연구에서 사용한 검출기는 3'${\phi}{\times}$3' NaI(T1) 섬광계수기(閃光計數器)와 plastic 에 밀봉하여 금속판에 압착 처리한 chip 과 Teflon-disk 로된 2종의 LiF TLD 였다. 실측실험으로는 3회에 걸친 24시간 cycle의 in-situ spectrometry 와 2회의 3개월 cycle 과 1회의 1개월 cycle에 걸친 TLD field dosimetry를 수행하였다. 측정한 모든 spectrum은 G(E)연산자법에 의하여 조사선량율(照射線量率)로 환산하였고 그 결과로부터 환경 방사선의 지설성분(地設成分)을 산출하였다. 결과(結果)에 의하면 spectrometry로 구한 조사선량율이 평균 $(10.54{\pm}2.96){\mu}R/hr$, TLD chip으로 측정해석한 값은 $(12.0{\pm}3.4){\mu}R/hr$, disk에서 얻은 값이 $(11.0{\pm}3.6){\mu}R/hr$로 오차범위 안에서 매우 좋은 일치를 보이고 있다. 그러나 감마선분광분석에 의한 자연방사선의 일변화(日變化)에는 가끔 심한동요가 관측되었다. 정확한 환경방사선량해석을 위하여 감마선분광분석과 TLD의 적절한 동시 배합사용이 바람직 하며, 보다 고감도의 TLD에 관한 연구와 국제비교등을 통한 선량평가의 정도향상(精度向上)을 위한 보다 깊이 있는 연구가 필요하다는 결론(結論)에 도달하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.488-499
• /
• 1996

Diabetes mellitus revealed a chronic disorder of lipid, carbohydrate and protein metabolism characterized by insulin deficiency, and a striking tendency toward development of atherosclerosis, microangiopathy, nephropathy, neuropathy and recently cardiomyopathy etc. The mechanism of heart failure in patients with diabetic cardiomyopathy is not clear but diabetic cardiomyopathy usually occurs in persons with long standing diabetes. After diabetes induced in made Sprague- Dawley strain rats by injection of streptozotocin(60mg/kg), cardiac tissue with hematoxylin-eosin and Masson's trichrome stain was examined at 3 days, 1, 2, 4, 6 weeks later under light microscope. The results were obtained as follows : 1. In H&E stain of control group, myocardiac cells were shorter than skeletal muscle cell, which was branched out and connected each other at terminal with striation, intercalated disk and nucleus at center of cell. 2. In MT stain of control group, a few of collagen fibrile were seen at periva scular interstium, but wasn't seen between skeletal muscle fiber, and cardiac muscle was seen in various size. 3. In MT stain of experimental group, increased collagen fiber deposition at perivascular interstiums were seen periodically. 4. In MT stain of experimental group, increased collagen fiber deposition at interstitial matrix between perimyocardiac cells were seen at 3 day, 4 weeks and 6 weeks after DM induction. 5. In H&E stain of experimental group, partial degeneration of myocardiac cells was seen after 4 weeks of DM induction. From above results, streptozotocin induced diabetes mellitus increased collagen around perivascular and between intercellular matrix in heart.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권3호
• /
• pp.330-336
• /
• 2000

A large number of streptococci that do not fit readily into any of the established classification schemes have been relegated to a large heterogeneous group called the Streptococcus viridans, which are members of the normal flora of the mucous membranes of the body, including the oral cavity, the nasopharynx, and genitourinary tract. This group includes S. mitis, S. oralis, S. sanguis, S. salivarius, S. milleri, etc. Surveying on the literature, it has been reported that infective endocarditis, meningitis, rhabdomyolysis, cholangitis, appendicitis caused by Streptococcus viridans, which were the most important pathogen in children with malignant hematologic disease. Various antibiotics has been chosen for treatment or prophylaxis for these infections, but were generally lower antimicrobial susceptibilities because of an abuse of antibiotics and advent of resistant group. Therefore, surveillant culture must be performed to evaluate personal antimicrobial susceptibilities of intraoral microbes for proper antimicrobial choice for dental procedures. This study examined sampling from subgingival plaque of 60 chidren's microbes. The cultured bacterial isolates, Streptococcus viridans were examined 10 antimicrobial drugs with the Kirby-Bauer agar disk diffusion method. The used drugs were Penicillin, Ampicillin, Oxacillin, Cephalothin, Imipenem, Gentamicin, Erythromycin, Vancomycin, Ciprofloxacin, Clindamycin. The results were as follows : 1. Sampling Streptococcus viridans were S. mitis(65%), S. oralis(22%), S. sanguis(5%), S. intermedius(3%), S. salivarius(2%), S acidominimus(2%), Unidentified streptococcus(2%). 2. The antimicrobial susceptibility of total Streptococcus viridans : Oxacillin< Erythromycin< Pencillin=Ciprofloxacin< Cephalothin< Ampicillin< Clindamycin< Gentamicin< Imipenem=Vancomycin. 3. The antimicrobial susceptibility of S. mitis : Oxacillin=Erythromycin< Ciprofloxacin< Cephalothin< Penicillin=Ampicillin< Gentamicin< Clidamycin< Imipenem=Vancomycin. 4. The antimicrobial susceptibility of S. oralis : Oxacillin< Erythromycin< Penicillin=Ciprofloxacin=Clindamycin< Cephalothin=Gentamicin< Ampicillin< Imipenem=Vancomycin. 5. There was no significant difference in the antimicrobial susceptibility among each Streptococcus viridans group.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2006

The hydroformability of aluminum alloy sheets at elevated temperatures have been investigated in this study. It is necessary to analyze the variations of the mechanical properties that depend on the forming temperature and the heat conduction during warm hydroforming. Therefore, in this study a coupled simulation of plastic deformation and temperature distribution in the warm hydroforming process is performed and compared with experimental data. The multi-purpose code DEFORM-2D can handle this type of calculations but it takes high computation time if contact heat transfer between die, tube and pressure medium occurs. Experiments were conducted by high temperature tribometer(pin-on-disk) allowing measuring the friction coefficients of the aluminum alloys at several temperatures and these results are applied to the coupled simulation by which the optimal process parameters such as internal pressure and preset temperature on hydroformability can be determined. The comparison of the FE analysis with the experimental results has shown that hydroformability given by bulge height, and temperature distribution of the tube specimen make a little difference with the FE results but the trend predicted by simulation agrees well with experiments.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.43-48
• /
• 2002

Dry sliding wear and friction test of CrN coaling on two types of aluminum alloy substrates,6061 Al and 7075 Al deposited by arc ion plating, was peformed with a ball-on-disk tribometer. The effects of normal Bead and the mechanical properties of substrate on the friction coefficient and wear-resistance of CrN coating were investigated. The worn surfaces were observed by SEM. The results show that surface micro-hardness of CrN- coated 7075 Al is higher than that of CrN-coated 6061 Al. With an increase in normal lead, wear volume increases, while the friction coefficient decreases. The friction coefficient of CrN-coated 6061 Al is higher than that of CrN-coated 7075 Al, while the wear-resistance of CrN-coated 6061 Al is lower than the CrN-coated 7075 Al's, which indicates that the substrate mechanical properties have strong inf1uences on the friction coefficient and wear of CrN coating. The main wear mechanism was fragments of CrN coating, which were caused by apparent plastic deformation of substrate during wear test.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.43-52
• /
• 1985

The purpose of this study was to measure the Micro-Knoop Hardness of three commercial visible light-cured composite resins (Plurafil-super, He1iosit and Durafi) according to the difference of depth and shade. Specimens of the resin were prepapared in plastic tubes 5mm in diameter with height of 5mm, and the tubes were put into the columned holes in stone molds. The molds were exposed to the visible light through the hole 5mm in diameter in metal plate. Specimens were sectioned (longitudinally) with disk. Knoop Hardness measurements were made at the depth of surface, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0mm from the surface to the deep portion. Knoop Hardness numbers were taken on each depth under 20gm load for 10 seconds with Shimadzu Tester. The following results were: 1. The highest hardness value was measured at 0.5mm depth. Then the deeper the depth, the lesser the hardness was observed. 2. The value of hardness was directly propotional to the time of exposure to the light. 3. The hardness of light shade resin was higher than the that of the dark shade. 4. The pattern of hardness change at varying depth is similar to all the experimental materials with no relation to the shade nor exposure time.