고령화 사회로 인한 관절 질환 환자의 증가로 TKRA(Total Knee Replacement Arthroplasty)가 증가하고 있다. 이에 따라 TKRA에 사용되는 인공관절에 의해 MRI영상에서 금속인공물이 발생하게 되는데 이는 진단에 영향을 미치게 된다. 그러므로 본 논문에서는 Co-Cr, Ni-Ti 소재의 인공관절과 시퀀스 변화를 주어 영상에서의 영향을 최소화시켜 진단의 효과를 높이고자 한다. 1.5T AVANTO장비와 플라스틱 통, 각각의 인공관절(Normal, Co-Cr, Ni-Ti)을 사용하였으며 종이컵 안에 인공관절을 고정시킨 후 원통 모양의 플라스틱 통 안에 넣어 신호강도를 측정하였다. 균일하고 강한 신호강도를 획득하기 위하여 플라스틱 통은 물로 채웠다. 시퀀스는 T1 TSE, T2 TSE, PD TSE로 변화하면서 실험하였고 Axial영상을 획득하였다. 신호강도는 동일한 크기의 관심영역을 설정하여 최대값, 최소값을 제외한 후 평균을 구해 SNR, CNR을 측정하고 Image J를 이용해 PSNR을 측정하였다. 결과적으로 PD TSE가 T1 TSE, T2 TSE에 비하여 SNR과 CNR 값이 크게 나타나왔고 Co-Cr이 Ni-Ti에 비하여 PSNR의 수치도 크게 나타나고 Normal의 SNR 값과 유사하게 나타난 것으로 보아 PD TSE의 시퀀스와 Co-Cr의 합금을 사용하는 것이 진단 및 판독을 하는데 있어서 유용할 것으로 사료된다.
본 연구는 열화된 플라스틱 작품의 보존처리를 위해 작품의 상태조사 및 재질분석을 실시하였으며, 보존처리에 주로 사용되는 접착제 5종(EVA계, PVAc계, Cyanoacrylate계)의 물성 및 접합특성을 평가하여 작품에 적합한 접착제를 선정하고자 하였다. 작품은 현재 열화로 인해 표면의 균열, 들뜸, 형태적 변형이 발생하였으며, FT-IR을 통한 재질분석결과, 작품에 사용된 합성수지는 EVA계로 추정되었다. 접착제의 물성평가를 위해 산성도 및 경도 측정을 실시한 결과, 산성도는 접착제 종류에 따라 다르게 나타났으며, 경도는 EVA계 보다 PVAc계 접착제가 더 높게 측정되었다. 의사시편을 제작하여 인공열화 후 접합특성을 비교한 결과, PVAc, Cyanoacrylate계 접착제는 색차 및 경도가 크게 증가하는 모습을 보인 반면 EVA계 접착제는 변화가 적어 가장 안정하였다. 작품의 보존처리 재료로써 EVA계 접착제가 가장 적합한 것으로 나타났다. 본 연구는 실제 작품을 대상으로 실시한 처리재료 연구로써 현재 플라스틱 작품의 보존처리에 대한 국내 연구가 부족한 상황에서 기초 자료로 활용 가능할 것으로 기대된다.
플라스틱은 뛰어난 조형성 및 대량생산의 장점에 의하여 점차 현대 미술에 전반적으로 쓰이게 되었다. 국내에서도 플라스틱 작품의 가치가 증대되고 있지만 산업용, 공업용 플라스틱에 대한 연구에 국한되어있다. 본 연구에서는 미술품으로서 제작에 사용되는 플라스틱 5종(PVC, PE, PP, PS, PU)의 극미량 시료를 이용하여 동정을 실시하였다. SPME를 이용한 VOCs 분석 결과, PVC는 방향족, 알칸류 화합물이 검출되었고 PE와 PP는 알칸류 화합물이 검출되었다. PS는 방향족 화합물이 확인되었고, PU는 폴리에스테르 기반의 PU에서 나타나는 diethylene glycol 등이 검출되었다. Pyrolysis 분석 결과, PVC에서 지방족 알켄류 화합물과 가소제(DEHP)가 확인되었고 PE 역시 지방족 알켄류 화합물과 가소제(DIBP)가 검출되었다. PP는 1-hexene 등이 검출되었으며 PS는 방향족 화합물이 확인되었고 PU는 폴리우레탄의 주요 재료인 MDI가 분석되었다. 이처럼 SPME와 pyrolysis 분석법으로 극미량의 시료를 이용하여 플라스틱 종류마다 각기 다른 특징적인 화합물이 검출됨으로써 동정 기술로써의 가능성을 확인하였다.
최근 현대 예술 작품 재료로 널리 쓰이고 있는 플라스틱은 온, 습도 및 자외선 등 다양한 환경 요인에 노출되어 심각한 손상이 진행되고 있다. 특히 플라스틱은 초기 열화 속도가 매우 빠르고 열화가 시작되면 본래의 모습으로 되돌아갈 수 없음에 따라 플라스틱 작품 보존에 대한 종합적인 연구는 매우 중요하나 국내에서는 현재까지 이에 대한 연구사례가 많지 않다. 이에 본 연구는 국외의 플라스틱 작품의 가치 상승 현황과 영국과 프랑스 등에서 현재 수행되고 있는 과학적 동정 기술 및 세척 방법에 대하여 조사하였다. 또한 PVC, PE, PP, PS, PU 총 5 종의 표준 플라스틱 시편을 제작하여 증류수, 에탄올, 아세톤, 고무 지우개의 4 종에 대한 세척력과 시아노아크릴레이트, 에폭시, 아크릴, 크로로프렌 고무계의 접착제 4 종을 실험하였다. 그 결과 세척제는 에탄올과 아세톤의 효능이 가장 뛰어났으며, 접착제는 시아노아크릴레이트 계와 에폭시 계가 인공 열화 이후에도 효능과 안정성이 뛰어난 것을 확인하였다. 이상의 연구는 향후 우리나라 플라스틱 보존을 위한 기초 연구 자료로 활용될 수 있을 것으로 기대된다.
Tashakori, Shervin;Farhangdoust, Saman;Baghalian, Amin;McDaniel, Dwayne;Tansel, Ibrahim N.;Mehrabi, Armin
Structural Engineering and Mechanics
/
제75권3호
/
pp.369-376
/
2020
The life of conventional steel plastic injection molds is long but manufacturing cost and time are prohibitive for using these molds for producing prototypes of products in limited numbers. Commonly used 3D printers and rapid prototyping methods are capable of directly converting the digital models of three-dimensional solid objects into solid physical parts. Depending on the 3D printer, the final product can be made from different material, such as polymer or metal. Rapid prototyping of parts with the polymeric material is typically cheaper, faster and convenient. However, the life of a polymer mold can be less than a hundred parts. Failure of a polymeric mold during the injection molding process can result in serious safety issues considering very large forces and temperatures are involved. In this study, the feasibility of the inspection of 3D printed molds with the surface response to excitation (SuRE) method was investigated. The SuRE method was originally developed for structural health monitoring and load monitoring in thin-walled plate-like structures. In this study, first, the SuRE method was used to evaluate if the variation of the strain could be monitored when loads were applied to the center of the 3D printed molds. After the successful results were obtained, the SuRE method was used to monitor the artifact (artificial damage) created at the 3D printed mold. The results showed that the SuRE method is a cost effective and robust approach for monitoring the condition of the 3D printed molds.
플라스틱에 첨가된 가소제는 플라스틱이 열화되면서 표면으로 빠져나오는 삼출 현상을 야기한다. 가소제가 첨가된 플라스틱 작품은 이 현상으로 인해 표면이 끈적해지고 먼지와 이물질이 부착되어 표면 오염이 발생할 수 있다. 이에 본 연구에서는 가소제가 가장 많이 사용되는 PVC를 대상으로 가소제 종류별 열화 양상 및 화학적 세척법을 연구하고자 하였다. 각각 다른 가소제가 첨가된 PVC 시편을 열화시킨 후 현미경 관찰, 색도 및 중량 측정, 적외선분광분석을 통해 열화 양상을 평가하였으며 동일한 방법으로 가소제가 삼출된 시편의 세척효과와 안정성을 평가하였다. 연구 결과, DOP 첨가 시편은 변색, DOA 첨가 시편은 중량 감소가 두드러졌으며 TOTM 첨가 시편은 변색과 더불어 가소제 삼출현상이 발생하였다. 가소제가 삼출된 TOTM 시편을 대상으로 화학적 세척법을 비교한 결과 에틸 알코올과 KOH 수용액은 세척효과는 좋았으나 안정성이 떨어졌으며 계면활성제는 세척효과와 안정성이 모두 준수한 것으로 나타났다. 본 연구 결과는 향후 가소제가 첨가된 플라스틱 보존처리에 활용될 수 있을 것으로 기대하는 바이다.
천마총(황남동 제 155호 고분)에서 출토된 철부(鐵釜)의 제작기법 및 보존처리에 대하여 연구하고자 하였다. 철부의 제작기법을 조사하기 위하여 유물 중 일부를 채취하여 마운팅 후 연마하고, etching을 실시하여 금속조직을 관찰하였고, 비금속개재물부분은 SEM-EDS로 분석을 실시하였다. 금속학적 조직검사와 SEM-EDS분석 결과 철 솥은 백주철 조직이 관찰되었고, 주조 후 상온에서 서서히 건조시킨 것으로 보이며, 취성을 개선하기 위해 별다른 열처리를 시도한 흔적은 보이지 않는다. 몸통 중심부의 폭3cm 두께 1.5cm 전이 확인됨에 따라서 가로식 거푸집을 활용한 이분제작기법을 사용하여 주조한 것으로 추정된다. 이처럼 백주철 조직과 가로식 거푸집을 활용한 제작기법은 비슷한 시기인 식리총과 황남대총에서 출토 된 철 솥에서도 나타나는 것으로, 당시 주조품의 생산기술이 동일하였음을 알 수 있었다. 보존처리는 크게 처리전조사, 이물질제거, 탈염처리, 강화처리, 접합 복원, 색맞춤의 순서로 진행하였으며, 처리과정 중 필요에 따라 세척 및 건조를 실시하였다. 강화처리는 유물의 크기로 인하여 진공함침에 어려움이 있었으므로, 저농도의 Paraloid NAD-10을 2-3차례 붓으로 도포하였고, 보존처리가 완료된 후 15wt.% Paraloid NAD-10용액으로 표면을 재강화하였다. 파손부위의 복원은 섬유강화플라스틱 수지(POLYCOAT FH-245,몰드 적층용)를 사용하여 파손 부위와 유사한 형태의 모형을 만든 후 접합하여 복원하였다. 이번 연구를 통하여 철제유물의 보존처리뿐만 아니라 5-6세기 주조 철솥의 제작기법에 대한 자료를 축적함으로 향후 보다 나은 연구를 위한 발판으로 활용되었으면 한다.
Studies were undertaken on the changes in the renal blood flow by relating them with the alterations in the amplitudes in the rheogram of rabbits. The changing pattern of the electrical conductivity was recorded by means of the needle electrodes inserted into the kidney and the surrounding aluminium foil which was grounded. The Impedance Rheograph manufactured by the Narco Company was used. The small artifact which persisted after ligation of the renal vessels was subtracted from the value obtained in each pulsatile wave in the rheogram. The animals were nembutalized intravenously, 30 mg/kg. A plastic canule was inserted into the carotid artery and the arterial blood pressure was monitored continuously with the pressure transducer connected to the physiograph. Stepwise bleedings were performed on the animal. The first bleeding was between 13 to 18 ml in the amount, and it was folowed by consecutive hemorrhages, 5 or 10 ml each time. The total amount of bleeding was summed as much as 1.5-2% of the body weight. Two minutes fter each bleeding th arterial blood pressure, ECG and the rheogram were taken. That was the necessary time to obtain the stabilized picture of each parameter. After closing the bleeding process, the shed blood was retransfused into the animal and the response in the renal blood flow was observed as well as the arterial blood pressure. Particularly the presence or absence of the autoregulatory mechanism in the situation of the hemorrhage was also studied. The results obtained were as follows: 1. In 7 cases out of 22, that was about one third of the total number of experiments, the autoregulatory mechanism of the renal blood flow persisted even in acute hemorrhage, and the decreases in the renal blood flow were less than 10% of the control values even when the arterial blood pressure dropped to 66-87% of the original value obtained before the bleeding. 2. Because of the stepwise bleeding the exact blood pressure at which the renal blood flow reduced as much as one third of the control value could not be obtained. However, the results revealed that the approximate pressure, expressed as percentage of the control value, was 50-60% in 3 cases, 61-70% in 4 cases and 71-80% in 8 cases. In one case the decrease in the renal blood flow exceeded one third of the control value before the pressure dropped to 80% of the control. 3. In 19 cases the decreases in the renal blood flow exceeded one half of the control values by hemorrhage. Then the arterial blood pressure revealed less than 40% of the control value in 6-cases. In 2 cases the pressure was 51-60% of the control pressure. In 5 cases the range of bleed pressure was 61-70%, and in e remaining 6 cases the pressure ranged from 71 to 80% of e control value. 4. Out of 15 cases of retransfusion after definite decreases in the renal blood flow loller·ing the hemorrhage, 9 cases restored their renal blood flow. On the contrary 6 cases showed low values even when the shed blood was retransfused. 5. Theories concerning the mechanism of the autoregulation of the renal blood flow were reviewed for the purpose of explanation of the results obtained. However, there are much to be done before greater satisfaction
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.