• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.178-186
• /
• 2009

Most of automotive plastic parts are injection molding products. Inspection of total product is impossible, because number of product to inspect is too many and various. Condition-based Monitoring was proposed to decrease cost and time for inspecting. In this research, a system that predicts quality of part at fabrication point of time, and confirms informations through the internet was developed. Cavity sensors were installed inside of mold, and gathered signals as measuring, and through this process Sensor-based Monitoring system can be observed manufacturing of a part. Monitoring system transmits signals to client through the internet, and finally developed system provides manufacturing informations and predictions of quality as web-based monitoring.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.22-26
• /
• 2018

In the automotive industry these days, plastic parts have been developed and replaced with plastic parts by maintaining the same function of existing press parts for a variety of reasons. Injection molding plastic parts are subject to molding defects due to various factors, among which the sink marks usually occur in the areas where bosses and ribs are installed. In this study, we analyzed the influence of various factors on the occurrence of sink marks by using the flow analysis of the forming analysis program(Moldflow analysis) using the rib model with the T-shape. Tests have shown that the greatest influence on the sink mark of cosmetic products is the thickness and pressure of the ribs, and the thickness of the basic moulding thickness of the product increases. However, it was considered that the resin temperature and the mold temperature do not greatly affect the occurrence of the sink mark.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.175-181
• /
• 2008

The technologies of mold design, manufacturing, injection molding process and computer aided engineering(CAE) are developed rapidly with the growth of plastic product market. Injection molding process optimum design can not be easily determined. This study was determined factors and levels which carried out to analyze an influence of narrow pitch BGA socket warpage and performed investigating the main effect and interaction effect between factors using design of experiment. The result of this paper is injection time and packing pressure are affect on narrow pitch BGA socket warpage at injection molding.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.68-74
• /
• 2002

This research covers the development of axi-symmetric plastic elements for injection molding with insert steel such as high stiffness Sabot. The functional requirements of sabot are concentricity and fracture resistance about vertical and horizontal forces. For these, an analysis of characteristics of PEI(polyetherimide) polymer is performed by standard test specimen with accordance of ASTM test guidance. Moldflow analysis and simulation of injection molding process are carried out in order not only to estimate of the warpage but also to predict the characteristics of residual stresses which both product and structure of mold may have. A new vertical side injection machine and transverse mold have been constructed. Results of the measuring concentricity and fracture test after molding of sabot are satisfied to design specification over Cp $ratio{\geq}1.33$. Finally, this technique needs more research application to others axi-symmetric elements having different radius with insert steel md structure analysis from now on.

• 소성∙가공
• /
• 제17권7호
• /
• pp.496-500
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But plastic parts are usually distorted after injection molding due to the residual stress after filling, packing, cooling process, and etc. And plastic material is to be deteriorated according to various temperature conditions and operating time, which can be characterized by stress relaxation and creep. The viscoelastic behavior of plastic materials in time domain can be expressed by the Prony series of the commercial code, ABAQUS. In the paper, the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.288-292
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But plastic parts are usually distorted after injection molding due to the residual stress after filling, packing, cooling process, and etc. And plastic material is to be deteriorated according to various temperature conditions and operating time, which can be characterized by stress relaxation and creep. The viscoelastic behaviour of plastic materials in time domain can be expressed by the Prony series of the commercial code, ABAQUS. In the paper, the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.28-34
• /
• 2013

For the senses of beauty and texture, internal components of small passenger cars are manufactured by texturing plastic with drawplate but those of deluxe passenger cars are manufactured by bonding pre-embossed skin to the surface of drawplate. As the pre-embossed skin is bonded at high temperature and pressure, the pattern of skin is distorted. The corner part is hardened and its dimension tolerance is changed by resulting in the increase with its defective rate. This study provides the method to design and manufacture the door trim track by vacuuming the non-patterned skin to upper-side drawplate which forms the pattern of descending skin. It is pressed to the plastic product with hot-press method and the damage of bossed-pattern is prevented. Valuation in this study has been done by analyzing, designing and experimenting method.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.82-87
• /
• 2019

Recently, plastic materials have become more diversified, and the development of materials with excellent mechanical properties and plasticity has enabled wider application, miniaturization, and refinement of injection molded products. As a result, the utilization of these products in household goods, electronics, automotive parts, and aircraft parts is increasing in almost all industries. Injection molded parts are often used externally on finished commercial products. This means that the injection mold industry is very important to the value of these products. For this reason, the industry is performing research on the precision and efficiency of the injection molding process. In this study, we investigated the applicability of the core in core cooling method to the problem of product deformation due to temperature variation in existing injection mold designs. We also characterized the cooling performance of an injection mold when using this cooling method.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.270-273
• /
• 2017

플라스틱 사출물의 불량 감소 및 사이클 타임 축소를 통한 생산성 향상은 사출업계의 오랜 숙원 사항이다. 특히 중국 등 후발 주자의 추격과 좁혀지지 않는 독일, 일본과의 기술격차 사이에 끼어 있는 국내 사출업계에게 생산성 향상은 매우 절실하다. 30여년 국내 사출업계의 연구와 경험을 통해 금형 내 사출물 표면 온도 제어가 품질 관리의 핵심임을 알게 되었고 PID 제어 등 고급제어 기법을 활용한 다양한 시도가 있었으나 독일, 일본의 유수 업체의 생산성에는 아직 부족하다. 이에 근사알고리즘 중 "Knapsack"개념과 "Minimum Makespan Scheduling"기법을 활용하여 PID 제어로 풀기 어려운 수렴하지 않고 주기적인 반복 데이터 패턴을 지닌 대상을 효율적으로 제어할 수 있는 방법을 소개하고 또한 실제 사출 현장에서 추출한 데이터 분석으로 사출품의 생산성 향상에 근사알고리즘을 이용한 제어가 충분히 효과적임을 제시하고자 한다.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5352-5356
• /
• 2013

최근 플라스틱 성형품은 기능적인 측면뿐만 아니라 디자인 및 광택과 같이 시각적으로 즉각 식별이 가능한 부분에 까지 많은 관심과 주의를 기울이고 있다. 이와 관련하여 성형품 광택의 제어를 위하여 성형조건이 광택에 미치는 영향에 대한 연구가 필요하지만 관련 연구는 아직 충분히 이루어지지 않고 있다. 따라서 본 연구는 플라스틱 성형품의 외관에 주로 사용되는 ABS (Acrylonitrile-Butadiene-Styrene) 플라스틱 성형품에 대하여 사출압력, 사출속도, 보압력, 수지온도, 금형온도 등의 사출조건의 변화가 성형품의 외관 광택에 미치는 영향에 대하여 사출실험을 통하여 연구하였다. 연구 결과에서 보압력이 가장 큰 영향을 미침을 알 수 있었다. 특히, 보압력 55 - 75MPa 범위에서는 광택도가 증가하지만 그 이상 증가하면 광택이 감소하는데, 그 원인은 SEM(Scanning Electron Microscope)을 통하여 수지 내부의 고무 입자의 변형에 기인한다고 유추할 수 있었다.