• Polymer Science and Technology
• /
• v.17 no.1
• /
• pp.27-37
• /
• 2006

• Journal of Welding and Joining
• /
• v.4 no.1
• /
• pp.47-57
• /
• 1986

The elastic-plastic fracture toughness J_{Ic}$ of submerged arc welded structural steel $SB_{41}$ which has the properties of low strength and high ductility was discussed, especially paying attention to a comparison between two methods recommended by ASTM and JSME. $J_{IC}$ tests were carried out with compact specimens by means of R-curve, SZW, ultrasonic and electric potential methods. Based on the investigations in this study, the results obtained are as follows; (1) The JSME R-curve method gave the smallest $J_{IC}$ values which were physically closest to the crack initiation and seemed to be more practical and stable procedure between the two R-curve methods. (2) The JSME SZW method tended to slightly overestimate the $J_{IC}$ values at initiation of ductile tearing. (3) The ultrasonic and electric potential methods which also had a tendency to overestimate these $J_{IC}$ values were confirmed to be applicable and useful in determining these values. (4) The $J_{IC}$ values by the JSME R-curve method were 18.06 kgf/mm and 17.25kgf/ mm for the smooths and the side grooved CT specimen respectively.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.22-28
• /
• 1998

Signal transmission and crosstalk of coupled bondwires buried in plastic packages are analyzed using the Method of Moments and the Fourier Transform algorithm. It is also shown that the quasi-static crosstalk model of SPICE is inappropriate for designing the high-speed plastic packages. Plastic packaging material, increasing the self and mutual capacitances, is found to be helpful for the signal transmission integrity due to the dielectric compensation effect. However, it is also observed that the plastic material increases the crosstalk due to the radiation-enhanced mutual coupling effect. By investigating the geometrical and material dependence of the pulse transmission and crosstalk, it is found that the radiation-enhanced coupling effect is significant for most of typical bondwire geometries and plastic package materials. These calculation results can be effectively used for designing plastic packages of high-speed digital IC's and monolithic RFIC's.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.765-771
• /
• 2001

Elastic-plastic fracture toughness JIC can be used a s an effective design criterion in elastic-plastic fracture mechanics. Among the JIC test methods approved by ASTM, unloading compliance method was used in this study. In order to examine the relationship between fracture behavior of JIC test and AE signals, the post processing of AE signals has been carried out by Short Time Fourier Transform(STFT), one of the time-frequency analysis methods. The objective of this study is to evaluate the application of characterization of AE signals for unloading compliance method of JIC test. As a result of time-frequency analysis, we could extract the AE from the raw signal and analyze the frequencies in AE signal at the same time. AE signal generated by elastic-plastic fracture of material has some different aspects at elastic and plastic ranges, or the first portion of crack growth by fracture. First of all, increased energy recorded and detected by using AE count method increase rapidly from the start of ductile fracture. The variation of main frequency range with time-frequency analysis method could be confirmed. We could know fracture behavior of interior material by examination AE characteristics generated in real-time when elastic-plastic fracture occurred in material under loading.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1115-1120
• /
• 1992

The apparent negative crack growth phenomenon which usually arises in partial unloading compliance test is well known. The reason for apparent negative crack growth is the compressive residual stress caused by the plastic zone around the crack tip. The phenomenon as a possible source of error in determining $J_{JC}$ or J-R curve from partial unloading compliance experiments may be eliminated by the correction of compliance. A compliance correction equation is derived from a stress field analysis near the crack tip.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.494-503
• /
• 1986

본 연구에서는 저강도.고연성재인 일반구조용압연강 SB41의 평골 CT 시험편과 양측면홈이 있는 CT시험편을 사용하여 ASTM R유선법, JSME R유선법,SZW법, 초음파법 및 전입차법에 따라 J$_{IC}$를 종합적으로 평가하였다. 복수시험편법인 ASTM 및 JSME 및 JSME R유선법을 상호 비교고찰하므로써 저강도.고연성재에 대한 파환인성평가 의 적용한계를 명확히 하였으며 단일시험편법인 초음파 및 전입차시험법은 효율적이고 간편한 J$_{IC}$평가법임을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.680-688
• /
• 1986

In order to obtain the optimal estimation method of fracture toughness of dual phase steel in which martensitic phase encapsulated islands of ferritic phase, the stretched zone (SZ) method and the R-curve method of the JSME S 001 was discussed. The results obtained are as follows. (1) The $J_{IC}$ values estimated by the SZ method are overestimated as compared with those by the R-curve method. (2) The $J_{IC}$ by the R-curve method decreases with the increase of the ferrite grain size and the martensite hardness. (3) The overestimation of $J_{IC}$ by the SZ method is due to the continuous plastic blunting of ferrite after the formation of stable crack which affects the critical stretched zone width.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.95-100
• /
• 1997

In order to predict the elastic-plastic fracture toughness for metallic materials, Finite Element Method(FEM) was used for analysis of compact tension specimen. ASTM E399 test procedure was adopted for simulation of FEM. The Load-Crack Mouth Opening Displacement curve obtained from this analysis was used to detect the crack initiation point and determine the elastic-plastic fracture toughness $J_{IC}$. In order to prove the results, they were compared with the results from previous experiments and they agree with experimental results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2405-2412
• /
• 2000

A cast stainless steel may experience an embrittlement when it is exposed to approximately 30$0^{\circ}C$ for long period. In the present investigation, The three classes of the thermally aged CF8M specimie n are prepared using an artificially accelerated aging method. Namely, after the specimen are held for 300, 1800 and 3600hrs. at 43$0^{\circ}C$ respectively, the specimens are quenched in water to room temperature. Load versus load line displacement curves and J-R curves are obtained using the unloading compliance method. $J_{IC}$ values are obtained following ASTM E 813-87 and ASTM E 813-81 methods. In addition to these methods, JIC values are obtained using SZW(stretch zone width) method described in JSME S 001-1981. The results of the unloading compliance method are $J_Q$=485.7 kJ/m$^2$ for virgin material, $J_{IC}$ of the degraded materials associated with 300, 1800 and 3600hrs are obtained 369.25 kJ/m$^2$, 311.02 kJ/m$^2$, 276.7 kJ/m$^2$, respectively. The results of SZW method are similar to those of the unloading compliance method. Through the elastic-plastic fracture toughness test, it is found that the value of $J_{IC}$ is decreased with increasing of the aging time. The results obtained through the investigation can provide reference data for a leak before break(LBB) of reactor coolant system of nuclear power plants.

• The Journal of Information Technology
• /
• v.3 no.1
• /
• pp.73-88
• /
• 2000

Dramatic changes are beginning to occur in plastic card technologies today in the fields of banking, health care, id-cards and more. Advanced card technologies such as IC-card are playing an increasingly important role in new and innovation system. The merit of IC-card are more capacity, more secure, more reliable, quick and easy to update, secure offline processing, enabling technology etc than magnetic stripe card. And so many countries began using experiment of IC- card and our country began October 13 in Cheju island. Then there are three types using-experiment (K-cash, VISA-cash, MONDEX) in Korea. There are some problems such as standards, widely using, high cost, double investment etc. I think that important things in IC-card using is an international- standardizations and issuing corporation.