• 터널과지하공간
• /
• 제18권6호
• /
• pp.465-479
• /
• 2008

저심도 터널 굴착시 예상되는 암반 거동을 정량적으로 파악하기 위해 계층 분석적 의사결정 방법과 암반 공학 시스템 방법을 적용하여 암반 거동 지수를 산정하였다. 복잡하고 조직화되지 않은 암반 거동을 효과적으로 결정하기 위해 쌍대 비교 매트릭스를 이용하는 계층 분석적 의사결정 방법과 상호 영향 매트릭스를 이용하는 암반 공학 시스템 방법을 적용하였고, 전문가 의견의 불확실성을 극복하고자 퍼지 델파이 방법을 적용하였다. 저심도 암반 터널 굴착 시 예상되는 암반 거동 유형으로 소성 변형, 낙반과 낙석을 제시하였다. 각각의 암반 거동 유형을 결정하기 위해 일축압축강도, 암질 지수와 절리 조건을 포함하는 암반 내생적 매개변수, 응력, 지하수와 지진 조건을 포함하는 암반 외생적 매개변수와 굴착 매개변수를 고하였다. 이를 서울 지하철 O호선 O공구 설계에 적용하여 예상되는 암반 거동 유형을 정량적인 암반 거동 지수로 제시하였다.

• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.59-68
• /
• 2003

최근, 강합성 구조의 외부 프리스트레스 도입 기법에 대한 응용연구가 왕성하게 수행되고 있다. 이는 역학적 효율성, 시공성 및 경제적 합리성면에서 우수한 강합성 구조에 외부 프리스트레스를 도입하므로써, 여러 가지 구조적 장점을 획득할 수 있기 때문이다. 이 논문에서는 외부 프리스트레스를 강합성 교량의 강주형에 도입할 때, 재료 비선형을 고려한 프리스트레스 합성형의 탄소성영역 휨 거동특성을 해석적으로 검토하기 위한 변형증분법(Incremental Deformation Method, IDM)을 제안하였다. 그리고 이를 실험을 통해 검증하였다.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.699-718
• /
• 2015

The effect of reinforcing concrete members with high strength steel bars with yield strength up to 600 MPa on the overall seismic behavior of concrete moment frames was studied experimentally and numerically. Three geometrically identical plane frame models with two bays and two stories, where one frame model was reinforced with hot rolled bars (HRB) with a nominal yield strength of 335 MPa and the other two by high strength steel bars with a nominal yield strength of 600 MPa, were tested under simulated earthquake action considering different axial load ratios to investigate the hysteretic behavior, ductility, strength and stiffness degradation, energy dissipation and plastic deformation characteristics. Test results indicate that utilizing high strength reinforcement can improve the structural resilience, reduce residual deformation and achieve favorable distribution pattern of plastic hinges on beams and columns. The frame models reinforced with normal and high strength steel bars have comparable overall deformation capacity. Compared with the frame model subjected to a low axial load ratio, the ones under a higher axial load ratio exhibit more plump hysteretic loops. The proved reliable finite element analysis software DIANA was used for the numerical simulation of the tests. The analytical results agree well with the experimental results.

• Applied Science and Convergence Technology
• /
• 제23권3호
• /
• pp.151-159
• /
• 2014

We investigated the effects of the chemical composition and the relative density on the plastic deformation behavior of sintered Fe-based alloys by means of compressive tests. Overall compressive stresses increased as the amount of alloying elements and the relative density were respectively increased. Addition of alloying elements except for Mo increased the yield stress regardless of the relative density. The relationship between the effects of the chemical composition and the relative density and the mean rate of the stress increase was analyzed. A constitutive equation based on the Ludwik equation with the regressed parameters was proposed to predict the compressive true stress-true strain curves of the sintered Fe-based alloys. The K and n values used in the proposed equation were regressed as a function of the alloying elements and the relative density based on the individual K and n values. The plastic deformation behavior predicted using the proposed constitutive equation showed reliable accuracy compared with experimental data.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.216-219
• /
• 2023

This study employs molecular dynamics simulations to investigate the material behavior of workpieces in waterjet machining processes. To gain fundamental insights into waterjet machining, simulations were conducted using pure water, excluding abrasive particles. The simulation model comprised thousands of water molecules interacting with a single crystal metal workpiece. Water molecule clusters were imparted with various velocities to initiate collisions with the metal workpiece. The material behavior of the metal surface was analyzed with respect to the applied velocity conditions, considering the intricate interplay between water molecules and the workpiece at the atomic scale. The results demonstrated that the machining of the metal workpiece occurred only when water molecules were endowed with velocities above a certain threshold. In cases where energy was insufficient, the metal workpiece exhibited a slight increase in surface roughness due to mild plastic deformation, without undergoing substantial material removal. When machining occurred, the ejection of material revealed a 3-fold symmetric pattern, confirming that material removal in waterjet machining of the metal workpiece is primarily driven by plastic deformation-induced material ejection. This research provides crucial insights into the mechanisms underlying waterjet machining and enhances our understanding of material behavior during the process. The findings can be valuable in optimizing waterjet machining techniques.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.25-26
• /
• 2007

At the time when nanostructured materials (NSMs) are becoming a major focus of materials research, the attention of researchers is turning more to their mechanical performance. In contrast with conventional coarse grained materials, which are either strong or ductile, but rarely both at the same time, it is expected that with NSMs both high strength and ductility can be achieved and confirmed by several experimental studies. In spite of the significant interest and efforts in the mechanical properties of NSMs, deformation mechanisms during plastic deformation as well as elastic deformation are not well established yet. In this talk, the deformation mechanisms of NSMs under various grain sizes, temperatures and strain rates were investigated. It is based on recent modelling that appears to provide a conclusive description of the phenomenology and the mechanisms underlying the mechanical properties of NSMs. Based on the theoretical model that provides an adequate description of the grain size dependence of elasticity and plasticity covering all grain size range from coarse down to the nanoscale, the tensile deformation response of NSMs, especially focusing on the deformation mechanisms was investigated.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.36-44
• /
• 2024

구리 전해 도금 기술은 반도체 패키징 및 반도체, 이차 전지 등 다양한 마이크로 전자 산업 분야에서 구리 박막 또는 배선의 제조를 위해 사용되고 있으며, 각 응용처에서 요구하는 특성을 획득하기 위해 이들 구리 박막 또는 배선의 미세조직을 제어하고자 광범위한 연구가 이루어지고 있다. 본 연구에서는 기계적 물성이 우수한 이차 전지용 구리 박막을 제조하기 위해, 이차 전지 제조 공정 중 기계적 또는 열적 하중에 의한 박막의 소성 변형 시 박막을 구성하는 결정립들의 결정학적 이방성의 영향성을 조사하였다. 이를 위해, 상이한 집합조직이 발달한 2 종류의 10 ㎛ 두께 전해 도금 구리 박막에 대해 전자 후방 산란 (electron backscattering diffraction or EBSD) 기술을 이용하여 표면 또는 단면의 결정 방위 지도를 측정하였고, 이들을 초기 입력 정보로 한 결정소성 유한요소해석을 통해 1축 인장 변형에 따른 박막 내부의 국부적 변형 거동을 분석하였다. 이를 통해, 인장 변형률의 증가에 따른 박막 내 소성 변형 불균질성과 집합조직의 변화를 추적하였고, 불균질한 소성 변형을 일으키는 결정립의 결정 방위를 확인하였다.

• 대한기계학회논문집
• /
• 제8권1호
• /
• pp.26-33
• /
• 1984

Constant-load-amplitude fatigue crack growth tests were carried out on 5083-0 aluminum alloy under elastic and elastic-plastic conditions. Crack length, crack closure and monotonic fatigue deformation were measured by Kikukawa's unloading elastic compliance monitoring technique and elastic-plastic fatigue crack growth rates were analysed in terms of J integral. Elastic-plastic fatigue crack growth rates can be well expressed by effective cyclic J integral until general yielding occurs. Beyond general yielding, monotonic fatigue deformation becomes significant and growth rates cannot be characterized by a single parameter of effective cyclic J integral alone. However, introducing one more parameter, maximum J integral J$_{max}$ to account for the effect of monotonic fatigue deformation, can explain fatigue crack growth behavior beyond general yielding.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.199-204
• /
• 2000

A cylindrical brake device with plastic deformation is designed to stop the object moving at high velocity. Baseline model is determined based on the design specification and analytic solutions. Using finite element method, effects of various design parameters, such as thickness of the cylinder, clearance between cylinder and rod, and cone angle, to the performance of the brake device are investigated. Cone-type brake device shows better performance than cylindrical brake device with constant thickness in that plastic hinges are generated sequentially from impact end to fixed boundary, thus increasing the reliability of braking operation.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.17-23
• /
• 2006

Monotonic four-point bending tests were conducted on straight pipe specimens, 102 mm in diameter with local wall thinning, in order to investigate the effects of the depth, shape, and location of wall thinning on the deformation and failure behavior of pipes. The local wall thinning simulated natural erosion/corrosion metal loss. The deformation and fracture behavior of the straight pipes with local wall thinning was compared with that of non wall-thinning pipes. The failure modes were classifiedas local buckling, ovalization, or crack initiation, depending on the depth, shape, and location of the local wall thinning. Three-dimensional elasto-plastic analyses were carried out using the finite element method. The deformation and failure behavior, simulated by finite element analyses, coincided with the experimental results.