• 제목/요약/키워드: Plasma wind tunnel testing

검색결과 4건 처리시간 0.02초

하프늄카바이드 코팅을 통한 2종형상의 탄소/탄소복합재의 내삭마성 향상연구 (A Study on Improvement of the Ablation Resistance of Two Types of the Carbon/Carbon Composites by HfC Coating)

  • 강보람;김호석;오필용;최성만
    • Composites Research
    • /
    • 제33권4호
    • /
    • pp.205-212
    • /
    • 2020
  • 본 연구에서는 기상화학반응공정을 이용하여 실리콘카바이드가 코팅된 2종형상의 탄소/탄소복합재 위에 진공플라즈마용사를이용하여 하프늄카바이드를 코팅하였다. 코팅 전/후 시편을 5.06 MW/㎡의 열유속에서 120초 동안 산화 및 삭마 실험을 진행하였다. 시험 전/후의 질량 변화량을 통해 질량삭마율을 계산하였고 캘리퍼스와 고속카메라를 이용하여 길이변화를 측정하여 길이삭마량을 계산하였다. 시편 단면의 FE-SEM 및 EDS 분석을 통해 산화 및 삭마거동을 관찰하였다. 플라즈마 풍동 시험결과 코팅된 시편이 무게감소 및 길이변화가 적어 내산화 및 내삭마성이 높은 것으로 판단되었다. 그러나 동일조건에서 시험한 반구형과 원통형의 산화 및 삭마정도는 상이하였고 원통형에서 더 높은 내산화 및 내삭마성을 가지는 것으로 평가되었다.

Study of microstructure of carbon-based materials in plasma wind tunnel testing

  • Kang, Bo-Ram;Lim, Hyeon-Mi;Oh, Phil-Yong;Hong, Bong Guen
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.200.2-200.2
    • /
    • 2016
  • Carbon-based materials have been known as ablative material and have been used for thermal protection systems. Ablation is an erosive phenomenon that results in thermochemical and thermomechanical changes on materials. Ablation resistance is one of the key properties that determines performance and life-time of the thermal protection material under ablative conditions. In this study, ablation properties of graphite, 3-dimensional (C/C) composites (needle-punched type and rod type) were investigated byusing a plasma wind tunnel which produce a supersonic plasma flow from a segmented arc heater with the power level of 0.4 MW. The mass losses and surface roughness changes which contain main result of the ablation are measured. A morphological analysis ofthe carbon-based materials, before and after the ablation test, are performed through field emission scanning electron microscopy (FE-SEM) and non-contact 3D surface measuring system. Electronic balance and a portable surface roughness tester were used for evaluation of the recession and mass loss of the test samples.

  • PDF

아크히터 내부의 난류 효과에 대한 고찰 (Investigation of Turbulent Flow Effect in Segmented Arc Heater)

  • 이정일;김규홍;김종암
    • 한국항공우주학회지
    • /
    • 제33권5호
    • /
    • pp.1-8
    • /
    • 2005
  • 아크히터의 작동특성을 예측하고 아크히터 자체의 설계와 해석을 위해, 세그먼트 아크히터(segmented arc-heater)의 내부 유동을 계산하였다. 지금까지 몇몇 연구자들이 아크히터 내부 유동을 수학적으로 모델링하여 일부 아크히터의 내부 유동을 정확하게 계산하는데 성공하였지만, 다양한 아크히터의 여러 운용 조건을 모두 만족하는 수학적 모델을 완성하지 못했다. 본 연구에서는 수학적 모델링의 범용성 확보를 위해, 아크 히터 내부의 난류 유동에 중점을 두었다. 기존의 대수 난류 모델을 대신하여 세 개의 2방정식 난류를 사용하였으며, 계산 결과 $k-\varepsilon$ 난류 모델이 아크히터 내부의 유동을 모사하는데 적합하다는 것을 확인했으며, 난류가 아크히터 유동을 특성을 좌우하는 중요한 요소 중에 하나라는 것을 밝혔다.

과학기술 하부구조 선진화를 위한 대형 연구장비의 수요 조사 (Demand Surveys for Big Research Facilities and Equipments to Advance National S&T Research Infrastructure)

  • 권용수;민철구
    • 기술경영경제학회:학술대회논문집
    • /
    • 기술경영경제학회 1997년도 제12회 동계학술발표회 논문집
    • /
    • pp.159-176
    • /
    • 1997
  • This paper deals with demand surveys for big science and technology research facilities and equipments to advance national S'||'&'||'T research infrastructure. We perform surveys thrice based on applied Delphi method on the future demand of big S'||'&'||'T research facilities and equipments among Korean scientists and engineers. We employ the concept of big S'||'&'||'T research facilities and equipments as follows: \circled1 The operating size of it is equivalent to that of an institute or research center, and/or \circled2 The users in various disciplines are many, and/or \circled3 The application areas or spill-over effects are large, and/or \circled4 The scale and scope of research objects is equivalent to that of mega science area such as earth.oceanography.space, and/or \circled5 The expenses for installing and operating it are to be supported by government, and/or \circled5 The facilities are expected as necessary for international joint research, and/or \circled7 It is necessary for promoting creative basic science and developing creative technology. We ask the respondents to answer the following questionnaire: - How to prioritize the equipments according to the degree of importance\ulcorner $\square$ Promotion of basic science and mega science, the development of the technologies to enhance the public welfare, the competitiveness of industrial technologies, the job creation for the S'||'&'||'T personnel, and international cooperation. - Who should be in charge of acquisition and operation of the equipments\ulcorner $\square$ Industry, Government Research Institutes, Academy, ERC and SRC. - When shall we acquire the equipment\ulcorner $\square$ Within 2000, 2002, 2007, 2012, and 2017. - How shall we acquire the equipments\ulcorner $\square$ International Joint Development, Domestic Development, Acquisition from Overseas, - How much will the equipment generate spill-over effects to national competitiveness\ulcorner $\square$ Promotion of basic science, contribution to the economy, supply of S'||'&'||'T personnel, and international cooperation. We suggest the following equipments as prioritized candidates after consulting the officers from MOST, MOE, MIC, MOEN and experts from KBSI and STEPI:(table omitted) where, #1, Korea Advanced Liquid Metal Reactor, #2. 800 MHz Superconduction Fourier-Transform Nuclear Magnetic Resonance Spectrometer, #3. Ion Accelerator, #4. Seismic Test Facility, #5. Transonic Wind Tunnel, #6. Radio Telescope for Very Long Baseline Interferometer, #7. 3000t Universal(or Large Structure) Testing Machine, #8. Compost Facility or Plasma Pyrolysis Facility.

  • PDF