• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.6
• /
• pp.269-273
• /
• 2005

In order to achieve high efficiency and low cost, new high-speed addressing method is suggested. This can be implemented by reducing the address discharge time lag through the priming effect. This paper suggests a new ADR(Address During Reset) driving method which provides priming particles by a separated driving method without adding auxiliary electrode or auxiliary discharge. The experimental results show an approximately 100ns reduction in the formative delay time of address discharge and a reduction in jitter of over 200ns. Also, due to enough time being available for reset, there was a reduction of about 29$\%$ in linht emitted during the reset period considerably.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.255-258
• /
• 2002

Recently, Digital TV viewer have been replacing cathode ray tubes (CRT) with Plasma display panel(PDP). But the chromaticity of the primaries are dependent on RGB input signals. And the colorimetry of PDP changes with gray scale and has a poor performance in color reproduction. In this paper we propose the enhanced algorithm of color reproduction considering nonlinear gamut mapping algorithm. In order to test performance of this algorithm we use the sample colors. As a result of experiments, it was confirmed that the color difference of the digital PDP using the proposed algorithm was considerably reduced.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.301-302
• /
• 2006

Load effect which occurs due to the electrode structure for PDP(plasma display panel) can seriously reduce the image quality of PDP. In this paper, we propose the method of reducing load effect in presentation images, which have the possibility of load effect, by using LUT(look-up table). The proposed method enhances the image quality of PDP by correcting load effect region of the still image.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.3-6
• /
• 2008

PDP는 어드레스 기간 동안 유전체 위에 축적한 벽전하(Wall-Charge)를 이용하여 화상정보를 입력함으로서 표시방전 셀을 결정할 수 있다. 따라서 벽전하의 해석은 방전 셀 특성을 분석하기 위한 중요한 요소이나 실제 X-Y 전극 간 벽전압은 다른 인가 펄스의 영향과 공간전하의 영향이 작용하여 측정이 쉽지 않다. 본 논문에서는 공간전하의 영향과 다른 인가 펄스의 영향을 고려하여 실제 표시방전 펄스의 방전 조건과 동일한 조건을 만들어 벽전하가 소거된 상황의 방전개시전압을 측정하였으며 측정된 결과를 통해 벽전압을 계산하였다. 또한 공간전하 발생 후 시간을 변화시키면서 방전지연시간과 방전강도를 측정하여 방전 시 발생한 공간전하에 의한 영향을 분석하였다.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.285-288
• /
• 2007

PDP(Plasma Display Panel) driving circuit requires switching devices and capacitors to stand up high voltages over 150volts. Thereby the power consumption and the cost of a PDP driving circuit increase. In this paper, a PDP driving circuit is proposed that can be operated with a lower supply voltage than the supply voltage of conventional driving circuit. The operation of the proposed driving circuit is verified by the computer simulation and experiments. PSPICE simulation and experiments results show that the output signal can drive PDP cells when the supply voltage is higher than 40volts.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1415-1417
• /
• 2009

High transmittance and low resistance index matched transparent conducting oxide (IMTCO) coated glass was prepared and characterized. IMTCO was deposited by RF magnetron sputtering with the thickness of 15nm and 90nm thick anti-reflection layer was evaporated. To modify surface to hydrophilic, in-situ plasma treatment was also performed. IMTCO coated glass exhibited 96.6% of transmittance in the wavelength range of 400~700nm which is relatively high value compared to commercially available IMTCO glass. The sheet resistance uniformity was measured to be 1.53%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.379-382
• /
• 1999

In this paper, we investigated the characteristics of MgO thin film prepared by unbalanced magnetron sputtering(UBMS) in surface discharge type AC PDP The minimum discharge voltage is obtained for the sample of substrate bias voltage-10V. Moreover the anti-sputtering characteristics of MgO thin film by UBMS is improved about 40% than one of balanced magnetron sputtering(BMS)

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.4
• /
• pp.190-196
• /
• 2001

We measured 3-dimensional images of the light emitted from plasma display panel(PDP) by using newly proposed scanned point detecting method(SPDM). The SPDM has the point detector with pinhole. The light emitted from PDP cell at the in-focus position can pass through the pinhole and be collected by detector. On the contrary, the light emitted from PDP cell at the out-of-focus positions is focused on the front of or the behind of the pinhole. We could analyze the characteristic of 3-dimensional light emission distribution by SPDM. From 3-dimensional measurement of 828[nm], the efficient design of PDP cell, the importance of opening ration, and the relations between BUS electrode position and discharge intensity are obtained. Also, the relationship between discharge characteristics and sustain electrode structures in AC-PDP are studied by measuring luminance, current, and discharge voltage.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.79-83
• /
• 1998

Plasma display panel is a potential candidate for HDTV, due to the fact hat the expansion of screen size is much easier using thick film technology. In this study, transparent dielectric materials using lead borosilicate glasses is developed, which satisfy the requirements of dielectrics for PDP. Paste is made of this glass composition. The paste has thixotropic behavior suitable for screen printing. The paste shows more thixotropic behavior as the particle size decrease. After firing, cross sectional area was analyzed by SEM. The void of fired thick film was removed using bimodal particle system. The dielectric showed good adhesion characteristics.

• Journal of KIEE
• /
• v.11 no.1
• /
• pp.46-50
• /
• 2001

In order to improve the luminous efficiency in ac PDP(Plasma Display Panel), we have suggested the new structures of sustain electrodes with waffle-type barrier ribs and the discharge current for a given pulse voltage has been decreased by eliminating the electrode area which has nothing to do with visible light emission area compared with conventional structure. As a result, the luminous efficiency was improved about 30% compared with the conventional structure.