• 약학회지
• /
• 제36권3호
• /
• pp.199-204
• /
• 1992

The trace elements in animal feed were analyzed by Inductively Coupled Plasma Mass Spectrometer (ICP-MS, VG-PlasmaQuad Co.) to find possible sources of heavy metals accumulation in rat organ. The study about spectral interference was performed by analysis of a background spectrum of ICP-MS. Recovery test using standard of Cd and Se (100 ppb) was found to be better than 90%. Twenty elements (Ca, Fe, Mg, Ti, Cr, Ni, Cu, Zn, Ba, Al, Mn, Pb, B, Ce, Bi, U, V, Cd, and W)are determined.

• 분석과학
• /
• 제11권4호
• /
• pp.271-280
• /
• 1998

국내에서 재배 생산된 현미로 부터 표준물질을 가공하여 원소별 검정분석을 실시하였다. 주요 오염원소의 농도가 서로 다른 2종의 쌀분말 표준물질을 제조하였는데 1종은 정상치시료로서 분말 시료를 그대로 처리하였으며, 1종은 제조과정중에 As, Cu, Pb, Hg, Cr, Cd등 6개의 중금속원소를 건조중량기준 $1.0{\mu}g/g$씩 첨가한 고농도 오염시료로서 제조하였다. 제조된 시료는 중성자방사화분석법 (NAA)과 불꽃원자흡수분광법(FAAS)으로 Cd, Cu, Fe, Mn, Zn등 5개 원소에 대한 균질도 분석을 실시하여 기준불질로서의 균질성을 확인하였다. 쌀시료의 분해 및 전처리에는 고온가압법과 마이크로파분 해법을 사용하였으며, NAA, FAAS, 흑연로원자흡수분광법(GFAAS), 유도플라즈마방출분광법(ICP-AES), 동위원소희석질량분석법(IDMS), 증기발생법 등을 이용하여 쌀분말표준물질 소재의 원소별 정량 분석을 실시하였다. 이들 각 방법의 원소별 분석결과를 이용하여 P, K, Mg, As, Ca, Cd, Cr, Cu, Fe, Mn, Mo, Na, Zn, Pb, Se, Hg등 16개 원소에 대한 검정값 및 참고값을 확정하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권2호
• /
• pp.179-186
• /
• 1995

In the present study, nutritional status of some minerals in sheep grazed on native pasture was investigated in dry area, Ningxia district, of the People's Republic of China. Samples of some forages and blood of sheep were collected for two seasons, dry (March) and rainy (August) seasons. The Ca contents of forages (wheat straw, green-pea straw and some wild grasses) were relatively high as compared with that required ordinarily as standard, but on the contrary, the P content was much lower than that of standard. Consequently, Ca/P ratio was very high in cost of the roughages sampled in the region. Trace elements, Cu and Zn, content of forage samples were fairly low, and the contents of Mo and Fe were fairly high, particularly in some wild grasses, when the values were compared with that required normally. The Ca level in blood of sheep was in a range accepted as normal, and the other macro minerals(Mg and P) were contained at relatively high levels as compared with the values observed ordinarily, but not at a toxic level. With trace minerals, the plasma Fe level was extremely high as compared with the standard level, although there were no disorders due to toxicity, and Mo level in plasma was a little lower than the lower limit described as a normal. The plasma levels of other trace elements (Cu, Zn and Se) in all the animals were within the range accepted as normal. There would be no clear differences in mineral nutrition of sheep between dry and rainy seasons. These results could suggest that there is no severe unbalance and/or imbalance, and grazing sheep in the Ningxia area of midland China have no problems relating to the nutritional status of minerals.

• Journal of Animal Science and Technology
• /
• 제62권1호
• /
• pp.58-63
• /
• 2020

The pre-treatment condition affects on the element analysis of inductively coupled plasma (ICP). In this study the pre-treatment condition of ICP has been studied to quantify elements in dog's hair. The hair samples were collected from twelve female Beagles by clipping them into 1 or 2 cm at the back neck. The qualitative and quantitative analysis of elements in hairs were performed by using ICP. By ICP nine elements were qualitatively detected and quantitatively analyzed (Ca, Cu, Fe, K, Mg, Na, P, Se, Zn). The measured amounts of elements were compared between 3 step and 2 step procedures which were with and without the acetone based washing step. The quantitative analysis showed that the concentrations of K, Na, P, and Se were significantly decreased in hair samples with acetone-based washing (p < 0.005 or 0.001) unlike those without the acetone-based washing. It implied that some minerals are lost by the acetone based washing during the sample preparation step. Therefore, the acetone based washing process is not suitable for quantifying elements in dog's hair. In addition, the results of qualitative and quantitative analysis were compared. Although there was a difference in absolute values of elemental contents in hair, the results of qualitative and quantitative analysis were significantly correlated each other. This finding suggested that the results of qualitative analysis can be used to monitor elemental contents in dog's hair.

• Journal of Animal Science and Technology
• /
• 제58권12호
• /
• pp.42.1-42.8
• /
• 2016

Background: Deficiency of macro and micro-minerals in the ration of dairy cows adversely affects growth, milk production and reproduction efficiency. It is essential to examine mineral concentrations in feeds offered to dairy cows in practical farms. Methods: Two villages from each taluka were selected at random for taking representative samples of feeds, forages and hair. Within the village, help was sought from village milk producers and district animal husbandry officer for identification of 4 to 5 farmers and collection of representative samples. All the samples were processed and analyzed for chemical composition as well as major macro and micro-minerals, using Inductively Coupled Plasma-Optical Emission Spectrometer. Results: Ca content in wheat straw (0.29%), crushed maize (0.02%) and wheat bran (0.12%) was found to be below the critical level (0.30%). The P content in concentrate ingredients was high (0.26-0.96%), but low in dry roughages (0.06-0.12%). Cereal straws (0.14%) and grains (0.12%) were deficient in Mg. Feeds and forages were found to be adequate in K (1.50%). Cereals straws were found to be deficient in S (0.11%). Greens were good source of Cu (12.02 ppm). Wheat straw was found to be low in Zn (18 ppm), but high in Mn (225 ppm) and Fe (509 ppm). Local grasses and azolla green were found to be rich source of Co (>1.00 ppm). Se (0.63 ppm) was present in appreciable quantities in most of the feedstuffs. Conclusions: From the present study, it was apparent that the feeds and forages available in the state of Jharkhand may not meet the requirements for Ca, P, Mg, Cu, Zn and Co in order to sustain a milk production of ~10 kg/day. Therefore, it is necessary to supplement these deficient minerals through area specific mineral mixture in the ration of dairy cows for improving productivity and reproduction efficiency.

• 한국광물학회지
• /
• 제11권1호
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• The Korean Journal of Physiology and Pharmacology
• /
• 제14권5호
• /
• pp.249-256
• /
• 2010

Gender differences in the trace elements of monkey sino-atrial (SA) node were investigated in a process of age-dependent alterations. Sixty hearts from Japanese and rhesus monkeys (30 male and 30 female) used were aged ranging from 1-day- to 30-year-old. The elements were analyzed using an inductively coupled plasma-atomic emission spectrometer (ICP-AES). Advancing age decreased all the trace elements. Ca, P, S and Mg significantly decreased. The correlation coefficients of Ca and P were $-0.178{\pm}0.081$ (p<0.05) and $-0.088{\pm}0.022$ (p<0.05) in male (n=30), and $-0.095{\pm}0.026$ (p<0.05) and $-0.069{\pm}0.017$ (p<0.05) in female (n=30), respectively. The age-dependent coefficients for Fe/Ca, Zn/Ca, Fe/P, Fe/S, Zn/S, Fe/Mg and Zn/Mg were exhibited markedly in male, but all was less in female. In gender-related differences, only a ratio of P/Ca (p<0.05) was significantly observed with ageing. The trace elements such as Cu, Se and Sn were less detected in the SA nodes. These results indicate that the age-dependent changes in the ratios of elements are appeared more rapidly in male monkey SA node, and the gender difference is observed in ratio of P/Ca. The different attenuations may be involved with the age- and gender-related SA nodal functions.

• 한국대기환경학회지
• /
• 제5권1호
• /
• pp.68-78
• /
• 1989

The heavy metal of suspended particulates with human health has long been studied in environmental interest concerned. This study was intended to identify harmful heavy metals of the ambient air borne dusts which were related with the respirable sizes in the aerodynamics. Two sampling sites were selected comparatively; one was in the Shinchon area, which is the commercial district with heavy traffic and the other site was in the Bulgwang area which is residential area. The supended particulates were sampled by high volume air sample with 6 cascade impactor stages. The heavy metals in terms of As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se, V and Zn were determined by stomic absorption spectrometry or inductively coupled plasma emission spectrometry. The samples weretaken bimothly for seven consecutive days from May 1987 to March 1988. The annual average concentration of the respirable suspended dust of which diameter is less than 10$\mum$ was 152.59 $\mug/m^3$ of the Shinchon air samples; the respirable dust was equivalent to approximately 85% of the total suspended particulates. The annual average concentration of the respirable suspended dust of the Bulgwang air samples was 112.56 $\mug/m^3$; that was approximately 86% of the total suspended particulates. The concentration of heavy metals was investigated in relation to the particle size. The concentration of Cr, Fe, Mn and V were tended to be much more in the coarse particles than in the fine particles. Cd and Pb in the fine particles were more than in the coarse particles. In the partial correlation coefficients; in the Shinchon area, high correlations among Fe, Se and Mn were determined; it is assumed that those sources would be originated from coal, gasolineand diesel. In Bulgwang area, would be high correlation among Fe, Se, Hg and Mn considered to be originated from coal, Bunker-C and heavy oil as well. From the above results, the hazardous heavy merals in air should be measured and controlled in originally their sources.

• Environmental Engineering Research
• /
• 제18권1호
• /
• pp.3-8
• /
• 2013

Collision cell technology-inductively coupled plasma-mass spectrometry (CCT-ICP-MS) was used to measure the concentrations of approximately 19 elements associated with airborne PM2.5 samples that were collected from a roadside sampling station in Daejeon, Korea. Standard reference material (SRM 2783, air particulate on filter media) of the National Institute of Standards and Technology was used for the quality assurance of CCT-ICP-MS. The elemental concentrations were compared statistically with the certified (or recommended) values. The patterns of distribution were clearly distinguished between elements with their concentrations ranging over four orders of magnitude. If compared in terms of enrichment factors, it was found that toxic trace elements (e.g., Sb, Se, Cd, As, Zn, Pb, and Cu) of anthropogenic origin are much more enriched in PM2.5 samples of the study site. To the contrary, the results of the correlation analysis showed that PM2.5 concentrations can exhibit more enhanced correlations with the elements (e.g., Fe, K, Si, and Ti) arising from earth's crust. The findings of strong correlations between PM2.5 and the elements of crustal origin may be directly comparable with the dominant role of those species by constituting a major fraction of even PM2.5 as well as PM10 at the roadside area.

• 한국환경보건학회지
• /
• 제49권2호
• /
• pp.66-77
• /
• 2023

Background: Along with the increase in consumer interest in and consumption of tattoo products, the controversy over harmful heavy metals associated with the use of tattoo cosmetics is also increasing. Therefore, investigation of hazardous metals in these tattoo products is needed. Objectives: This study was performed to provide useful data for establishing reasonable standards to securely manage tattoo cosmetics, tattoo stickers, and tattoo inks distributed in the market. Methods: Thirteen kinds of hazardous metal contents (Pb, As, Cd, Sb, Ni, Co, Cu, Cr, Se, Ba, Zn, Sn, and Hg) were analyzed for 23 tattoo cosmetics, ten tattoo stickers, and 16 tattoo inks. Hg was measured through the combustion-gold amalgamation method, and other hazardous metals were measured by inductively coupled plasma-mass spectrometry (ICP-MS) after acidic decomposition using a microwave apparatus. Results: The detected ranges of Pb, As, Cd, Sb, Ni, and Hg in tattoo cosmetics were 0.07~1.18, 0.06~0.41, ND~0.07, 0.01~3.44, 0.12~2.75, and ND~0.01 ㎍/g, respectively. All of the hazardous metals detected were below the recommended maximum standards of the Ministry of Food and Drug Safety. The mean amount of Pb detected in tattoo stickers for children was 0.24 ㎍/kg and Cd was not detected, meaning both metals met the recommended criteria. There was no statistically significant difference in all measured metals between children's tattoo stickers and adults' tattoo stickers. In the results of the study on the hazardous metal content of tattoo inks, four products (25%) for Pb, one product (6%) for As, 13 products (81%) for Ni, four products (25%) for Cu, and five products (31%) for Zn exceeded the recommended standards approved by the government. The highest predicted exposure amount for hazardous metals exceeding the recommended level of tattoo inks in a single tattooing was 5.69 ㎍/kg for Ni, 8.51 ㎍/kg for Zn, 0.44 ㎍/kg for Pb, 8.07 ㎍/kg for Cu, 0.44 ㎍/kg for As, and 71.36 ㎍/kg for Ba. Conclusions: It is necessary to prepare criteria for content limitation for the management of Co, Cr, Ba and Se tattoo cosmetics, and tattoo inks require thorough quality control.