• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2819-2832
• /
• 1996

The estimation of the remaining life for the aged components in power plant as well as chemical and petroleum plants has been recently concerned. The raw materials used in this study are the 1Cr-1Mo-0.25V steel which intensified P and S compositions along with the nominal compositions of ASTM A 470 standard. Five kinds of specimens with the different degradation levels were prepared by isothermal aging heat treatment at 630.deg.C. The mechanical properties and rotated bending fatigue strength of virgin and aged 1Cr-1Mo-0.25V steel have been investigated through the hardness, tensile, fatigue test, SEM fractograph and EDS analysis at 538.deg.C and room temperature, respectively. Thus the data of aged specimens were compared with those of virgin specimen to evaluate the aging effects. The main results obtained in this study are as follows ; The decrease of the yield and tensile strength due to degradation was distinguished until 50, 000hrs simulated service time. And it was confirmed that the considerable amount of P, Mn, Cr and S was precipitated at the grain boundary of aged material through the SEM and EDS analysis. The rotated bendingd fatigue strength at 538.deg.C of virgin, 25, 000, 50, 000, 75, 000 and 100, 000 hrs aged material was decreased 44.6 %, 49.6 %, 51.5 %, 52.4% and 53.8% than that of virgin material at 10$_{7}$cycles of room temperature, respectively. The major cracks of virgin and aged materials mainly initiated at the inclusions including Si, P and Mn compositions which were located at the outer periphery of the specimen.n.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.39-47
• /
• 2018

베트남 정부는 석탄화력발전소 증설을 중심으로 한 발전용량확보 계획을 추진 중이며, 그에 따라 발전회의 발생량이 지속적으로 증가하고 있어 발전회 대량처리 방안 확보가 시급한 실정이다. 본 연구는 베트남에서 발생되는 발전회 중 순환유동층발전소 플라이애시를 지반고화재의 원료로 활용하기 위해 수행되었다. 플라이애시의 혼용이 지반고화재 성능에 미치는 영향을 확인하기 위해 대상 플라이애시와 고로슬래그, 석고, 시멘트 등을 사용하여 지반고화재를 제조하고, 이를 베트남 연약지반 토사와 혼합하여 시험체를 제작한 후 성능을 평가하였다. 그 결과, 28일 기준 강도 3 MPa 확보가 가능한 배합을 확인하였으며, 기존 보통 포틀랜드 시멘트만을 사용한 고화재 보다 내산성이 뛰어나 산 침지 시험에서 중량손실률을 절반이하로 감소시킬 수 있었다.

• 한국해양공학회지
• /
• 제10권2호
• /
• pp.77-87
• /
• 1996

The estimation of the remaining life for the aged components in power plant as well as chemical and peroleum plants has been recently coberned. The raw materials used in this syudy are the 1Cr-1Mo-0.25V rotor steel which intensified P and S compositions along with the nominal compositions of ASTM A470 standard. Five kinds of specimens with the different degradation levels were prepared by isothermal aging teat treatment at $630^{\circ}C$ The mechanical properties and fatigue strength of virgin and aged 1Cr-1Mo-0.25V rotor steel have been inbestigated through the hardness, tensile, fatigue test, SEM fractograph and EDS analysis at room temperature. Thus, the data of aged specimens were compared with those of virgin specimen to evaluate the aging effects. The main results obtained in this study are as follows; The decrease of the hardness due to degradation was distinguished until 50, 000hrs simulated service time. And is was confirmed that the considerable amount of P, Mn, Cr and S was precipitated at the grain boundary of aged material through the SEM and EDS analysis. The fatigue strength of 25, 000, 50, 000, 75, 000 and 100, 000hrs aged material was decreased 29.5%, 24.4%, 28.6%, 35.7% than that of virgin material at $10^7$ cycles of room temperature. The major cracks of virgin and aged materials initiated at the inclusions including Si, P and Mn compositions which were located at the outer periphery of the specimen.

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.278-285
• /
• 2006

발전소의 탈황설비에 적용하기 위한 B-H 코팅조성물을 탄소강에 코팅하여 $65^{\circ}C{\sim}80^{\circ}C$에서 경화시켰다. 이들 시편을 $100^{\circ}C$와 $120^{\circ}C$의 70 wt% $H_2SO_4$ 용액에 접촉시킨 후 코팅조성물의 조성, 비이커스 경도, SEM에 의한 미세구조 등을 분석하였다. 황산에 대한 내산성은 내산성 시험후 코팅 조성물의 $SO_3$양과 관련이 있었다. 경화온도가 높을수록, 경화시간이 짧을수록 내산성이 좋았으나 고온일 경우에는 균열이 더 많이 발생하여 내산성을 떨어뜨렸다 B-H 코팅 조성물의 고온 내산성을 향상시키기 위한 조건은 경화온도 $65^{\circ}C$이상, 경화시간 12시간 이상이었다.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1569-1573
• /
• 2008

본 논문은 핵발전소 증기발생기의 초음파 비파괴 검사용 프로그램 개발에 관한 것이다. 개발된 프로그램은 A, B, C, D-스캔과 같은 고전적인 해석방법뿐만 아니라 3차원 영상처리 기법을 이용하여 증기발생기 내부에 발생한 결함을 해석하고 검출할 수 있다. 결함의 3차원 영상은 핵발전소의 파이프라인으로부터 얻어진 1차원 초음파 데이터를 EMD(Empirical Mode Decomposition)로 분석해 결함의 위치를 구하고 voxel을 이용하여 구현하였다. 얻어진 3차원 영상은 2차원 해석방법을 사용하지 않더라도 결함의 위치, 형태, 크기 등과 같은 유용한 정보를 얻는데 용이하다. 개발된 프로그램은 이미 결함의 위치 및 모양, 크기 등을 알고 있는 시편의 측정에 사용하여 프로그램의 정확성을 검증하였고, 3차원 영상으로 결함의 입체적 모양을 구현하였다.

• Mycobiology
• /
• 제45권4호
• /
• pp.255-262
• /
• 2017

A total of 121 species of lichens belonging to the genus Arthothelium have been described to date, most of which have been found in tropical regions. Here, we describe the discovery of a novel Arthothelium species for the first time in South Korea. Until now, Arthothelium ruanum was the only Arthothelium species reported in South Korea. Among the 113 specimens collected in this study, we identified A. ruanum and a putative new species, Arthothelium punctatum (J. S. Park & J.-S. Hur, sp. nov.). The diagnostic characters of A. punctatum are as follows: apothecia punctate, shortly elongate to branched, small, 0.1-0.2 mm wide, hypothecium hyaline to pale brown and obovate to broadly ellipsoid, muriform ascospores, $29.5-44.6{\times}12.2-18.2{\mu}m$. The new species was found in Mt. Seokbyeong at an altitude of 790 m on smooth bark. Upon phylogenic analysis, the putative new species, A. punctatum, was separated from other Arthothelium species although the specimens analyzed were clustered with Arthoniaceae in phylogenetic trees based on both the mitochondrial small subunit (mtSSU) sequence and combined mtSSU and nuclear ribosomal large subunit sequences. Our data clearly indicate that this species is a new species belonging to the family Arthoniaceae. To elucidate the taxonomic characteristics of the new species, we provide morphological descriptions and a distribution map.

• Nuclear Engineering and Technology
• /
• 제19권3호
• /
• pp.169-179
• /
• 1987

소형시험편(1/2"T)을 이용, 균열진전량 및 J계산식에 따른 재료의 J-R (J-T) 곡선의 변화를 조사하여 신뢰성있는 J-R(J-T) 곡선을 구하기 위한 실험 및 해석방법을 고찰하였다. 시험은 국내 원자력발전소 압력용기감시 시험에 포함되어 있는 파괴인성시편과 꼭같이 SA 533 Grade 3, Class1 재료로 제작한 1/2"T, C-T 시편을 이용, Single Specimen Unloading Compliance Technique으로 수행하였다. 시험 및 해석결과 Ernst의 Deformation theory J (JD)식을 이용하여 초기 Uncracked ligament (be)의 25～30%까지 균열을 진전시켜 구한 J-R(J-T) 곡선이 대형시편의 결과와 가장 유사한 값을 나타내었다. 한편 Ernst의 Modified J (JM)식에 의한 J-R (J-T) 곡선은 Deformation theory J(JD)에 의한 J-R(J-T) 곡선보다 다소 높은 Instability 예측점을 얻을 수 있기 때문에 실제 압력용기 안전성 해석시에는 가동률향상 및 수명연장 측면에서 Modified J의 사용은 고려되어야 할 것이다.되어야 할 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.33-34
• /
• 2019

Malaysia, as a tropical rainforest country, enjoys an abundance of bamboo plant that proliferate throughout the country. The application of geopolymer technology has become a trend and preserve the environment from harm. Fly ash geopolymer concrete has low early strength and requires 24 hours for the concrete to harden. Thus, the presence of calcium and potassium content in bamboo ash could remedy this problem. Besides, there is no research regarding the use of bamboo ash as a binder in geopolymer concrete. Therefore, the presence of bamboo ash could improve the research field with the use of agriculture waste in a building construction. This research aim is to use bamboo ash in the production of fly ash geopolymer concrete. The specimens were casted in $100mm{\times}100mm{\times}100mm$ cubes and sodium based activator were used as the alkaline solutions. The binders are formulated with different binder ratio. All test specimens were cured at ambient temperature ($23^{\circ}C-25^{\circ}C$) and 100% fly ash was chosen as control specimen. To determine the mechanical properties of fly sh geopolymer concrete with the presence of bamboo ash, compressive strength test was conducted. The test results depicted that as the percentage of bamboo ash decreases, compressive strength increases. Also, the addition of 5% of bamboo ash into fly ash geopolymer concrete could improve the early strength in 7 days. The results were proven with the result explained by X-ray fluorescence (XRF) and X-ray diffraction (XRD). Therefore, it can be concluded that the addition of bamboo ash improved the properties of fly ash geopolymer concrete at early ages.

• 한국지진공학회논문집
• /
• 제26권1호
• /
• pp.13-22
• /
• 2022

This study proposes a low-cycle fatigue life derived from measurement points on pipe elbows, which are components that are vulnerable to seismic load in the interface piping systems of nuclear power plants that use seismic isolation systems. In order to quantitatively define limit states regarding leakage, i.e., actual failure caused by low-cycle fatigue, in-plane cyclic loading tests were performed using a sine wave of constant amplitude. The test specimens consisted of SCH40 6-inch carbon steel pipe elbows and straight pipes, and an image processing method was used to measure the nonlinear behavior of the test specimens. The leakage lines caused by low-cycle fatigue and the low-cycle fatigue curves were compared and analyzed using the relationship between the relative deformation angles, which were measured based on each of the measurement points on the straight pipe, and the moment, which was measured at the center of the pipe elbow. Damage indices based on the combination of ductility and dissipation energy at each measurement point were used to quantitatively express the time at which leakage occurs due to through-wall cracking in the pipe elbow.

• 센서학회지
• /
• 제31권2호
• /
• pp.85-89
• /
• 2022

We investigated a pH sensor using an Indium tin oxide (ITO) nanoparticle (NP) film printed on a flexible substrate. First, the printing precision and mechanical stability of the ITO-printed film were investigated. In particular, the factors that influence the crystallinity of ITO films were studied using X-ray diffraction pattern analysis. The response of the ITO pH sensor was calibrated using a series of standard pH solutions (pH 3-11). The pH values of various specimens were measured using an ITO pH sensor, and the results were compared with those of various pH measurement methods. As a result of the experiment, the maximum error was approximately ± 0.04 pH (0.4 %) at pH 9, which indicated that the ITO pH sensor is highly suitable for pH measurement. Finally, we used the ITO pH sensor to the measure of general specimens such as solvents and beverages and compared the results in comparison with those obtained from several conventional methods.