• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.485-492
• /
• 2018

About 300 thousand tones of oyster shells are produced annually and, thus, their massive recycling methods are required. Recently, a method, utilizing them as wet desulfurization materials after removal of organic matters and changing $CaCO_3$ phase into CaO through calcination, is under consideration. This study investigates the mineralogical changes (specific surface area, phase changes, surface state, etc.) of oyster shells by calcination and their characteristics were compared with those of limestone. Uncalcined oyster shells showed the higher specific surface area than limestone because the former are composed of platy and columnar structures. In contrast, investigated limestone showed a dense structure. The phase change of oyster shells occurred at lower temperature than that of limestone. The specific surface area of oyster shell decreased significantly after calcination while limestone depicted a drastic increase. Small amount of Na contained in oyster shell was suggested as the cause of this phenomenon; in that, it acted as a flux causing melting and sintering of oyster materials at lower temperature. Because of this, an additional phenomenon was observed that a part of shell materials remained untransformed even at higher calcination temperature and after longer treatment period due to the sintered surface, which covers the rest parts. Further studies investigating the effect of this phenomena from the perspective of desulfurization is required.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.5-12
• /
• 2021

In order to extract the essential oil contained in the Elsholtzia splendense Nakai, a fully-bloomed individual was collected and the living body was used for the experiment. Plants were divided into 0.7kg of flowers and 1.5kg of leaves + stems, and extracted by parts and used for scent pattern analysis, and extracted after adding 5kg of outpost for the analysis of essential oil components. Essential oil extraction was performed using the SDE method improved by Schultz et al. (1977), and the extraction time was limited to 1 hour after the material started boiling. The extracted essential oil component was analyzed for fragrance pattern analysis using an e-nose, and the results of analyzing the substance of the essential oil component by GC-MS are as follows. 1. As for the fragrance pattern analysis, in the case of essential oils extracted from flowers, the scent quality was the best at 10-20 minutes, and the scents extracted from stems and leaves were somewhat of poor scent quality, but the fragrance was good at 10-40 minutes. The intensity of scent was the strongest in 10-20 minutes, and the intensity of incense was high even in 30-40 minutes. The scent extracted from the stems and leaves was generally not strong, but appeared high in 10 to 20 minutes. 2. There were 40 kinds of essential oils contained in Elsholtzia splendense Nakai oil. Among them, Mequinol, Benzene, 1,2,3,4-tetramethyl, Elsholtziaketone, and Dehydroelsholtziaketone were identified.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.275-284
• /
• 2022

Changes in air temperature, CO₂ concentration and precipitation due to climate change are expected to have a significant impact on soybean productivity. This study was conducted to evaluate the climate change impact on growth and development of determinate soybean cultivar in the southern parts of Korea. The high temperature during vegetative period, which does not accompany the increase of CO₂ concentration, increased the canopy photosynthetic rate in soybean, but after flowering, the high temperature above the optimal ranges interrupts the photosynthetic metabolism. In yield and yield components, high temperature reduced both the pod and seed number and single seed weight, resulting in a reduction of total seed yield. On the other hand, the increase in CO₂ concentration dramatically increased the canopy photosynthetic rate over the whole growth period. In addition, high CO₂ concentration increased the number of pods and seeds, which had a positive effect on total seed yield. Under concurrent elevation of air temperature and CO₂ concentration, canopy photosynthesis increased significantly, but enhanced canopy photosynthesis did not lead to an increase in soybean seed yield. The increase in biomass and branch by enhanced canopy photosynthesis seems to be attributed to an increase in the total number of pods and seeds per plant, which compensates for the negative effects of high temperature on pod development. However, Single seed weight tended to decrease rapidly by high temperature, regardless of CO₂ concentration level. Elevated CO₂ concentration did not compensate for the poor distribution of assimilations from source to sink caused by high temperature. These results show that the damage of future soybean yield and quality is closely related to high temperature stress during seed filling period.

• Clean Technology
• /
• v.28 no.4
• /
• pp.316-322
• /
• 2022

The flow pattern at the inlet of the catalyst layer in a selective catalytic reduction (SCR) system is one of the key parameters influencing the performance of the denitrification process. In the curved diffusing parts between the ammonia injection grids and the catalyst layers, guide vanes are installed to improve flow uniformity. In the present study, a numerical simulation has been performed to investigate the effect of the geometrical configuration of the guide vanes on the aerodynamic characteristics of a denitrification facility. This application has been made to the existing SCR process in a large-scaled coal-fired power plant. The flow domain to be solved covers the whole region of the flow passages from the exit of the ammonia injection gun to the exit of the catalyst layers. ANSYS-Fluent was used to calculate the three-dimensional steady viscous flow fields with the proper turbulence model fitted to the flow characteristics. The root mean square of velocity and the pressure drop inside the flow passages were chosen as the key performance parameters. Four types of guides vanes were proposed to improve the flow quality compared to the current configuration. The numerical results showed that the type 4 configuration was the most effective at improving the aerodynamic performance in terms of flow uniformity and pressure loss.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.637-646
• /
• 2020

Background and objective: The main objective of this study is to measure the amount of particulate matter (PM) reduction under different characteristics of leaves in 18 different species of indoor plants. Methods: First, a particular amount of PM was added to the glass chambers (0.9×0.86×1.3 m) containing the indoor plant (height = 40 ± 20 cm), and the PM concentration were measured at 2-hour intervals. The experiment with the same conditions was conducted in the empty chamber as the control plot. Results: The range of PM reduction per unit leaf area of 18 species of experimental plants was 3.3-286.2 ㎍·m^-2 leaf, total leaf area was 1,123-4,270 cm², and leaf thickness was 0.14-0.80 mm and leaf size 2.27-234.47 cm². As time passed, the concentration of PM decreased more in the chamber with plants than in the empty chamber. Among the 18 indoor plants, the ones with the greatest reduction in PM2.5 in 2 hours and 4 hours of exposure to PM2.5 were Pachira aquatica and Dieffenbachia amoena. As the exposure time of PM increased, the efficiency of reducing PM2.5 was higher in plants with medium-sized leaves than plants with large or small leaves. The effect of reducing PM2.5 was higher in linear leaves than round or lobed leaves. Plants with high total leaf area did not have advantage in reducing PM because the leaves were relatively small and there were many overlapping parts between leaves. In the correlation between leaf characteristics and PM 2.5 reductions, all leaf area and leaf thickness showed a negative and leaf size showed a positive correlation with PM reduction. Conclusion: The PM reduction effect of plants with medium-sized leaves and long linear leaves was relatively high. Moreover, plants with a large total leaf area without overlapping leaves will have advantaged in reducing PM. Plants are effective in reducing PM, and leaf characteristics are an important factor that affects PM reduction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.3
• /
• pp.273-281
• /
• 1990

Two rice varieties, Samkangbyeo and Sangpungbyeo, were transplanted on 1/2000a pots at 6 different dates beginning on May 11 with 10 day interval in 1987 and at 4 different dates beginning on May 21 with 10 day interval in a paddy field at the Chungbuk Provincial Rural Development Administration. Dry matter distributions to stem and leaf sheath, leaves and ear at different growth stages were analyzed to provide basic informations neccessary for the development of dynamic growth model. Dry matter production was reduced as transplanting was delayed and the degree of reduction was greater at the transplanting later than June 1. Dry matter distribution to stem and leaf sheath was increased up to 60-70 days after transplanting with the maximum ratio between 60-70%, which were decreased to 37-43% in pots and 27-33% in field at the end of ripening stage. On the other hand, dry matter distribution to leaf blade was decreased from 40-50% at transplanting to 11-17% at harvesting. Ear dry matter distribution increased rapidly after heading and the distribution ratio was 42-49% in pots and 52-62% in field. Although regression equations to predict dry matter distribution to different parts of rice plant were satisfactory for individual experiment, the application to different experiment was not appropriate.

• The Korea Journal of Herbology
• /
• v.24 no.2
• /
• pp.77-85
• /
• 2009

Objectives : To determine the discriminative criteria for Atractylodes rhizomes, the experiment of externalinternal characteristics and physicochemical pattern analysis were performed. Methods : External characteristics was observed using stereoscope. The sectioned materials which were covered with parffin were stained by Ju's method. Physicochemical patterns were analyzed using HPLC/DAD. Results : 1. External shape of original plant : Atractylodes maaocephala and A. japonica had relatively long petioles and 3-5 parted leaves. A. macrocephala had big purple flowers whereas A. japonica had relatively small white flowers and pinnate bracts. A. lancea had sessile leaves and white flowers, and the end parts of degenerated stamens were bent. 2. External shape of herbal medicine: A. macrocephala which was fist-shaped rhizome had pa-pillate processes and the cross section was light gray and sulcate. A. japonica and A. lancea were connected-beady or tubercular rhizomes, and the cross sections were both yellow-colored white. However, the cross section of A. japonica was fibrous, the width of cortex was narro-wer than that of stele, and radial shape in cortex was rare, whereas the width of cortex in A. lancea was similar to that of stele in size, and radial shape in cortex was obvious. 3. Internal shape of herbal medicine: A. macrocephala and A. lancea did not have lignified fascicles in cortex. However, the vascular bundles and vessels of A. macrocephala were wedge shaped and radial arrangement, and vascular bundles were densely populated in stele whereas those of A. lancea were repeatedly arranged and thinly extended to cortex. A. japonica had lignified fascicles in cortex and the width of vascular bundles was conspicuously thick with narrow intervals. 4. Physicochemical pattern analysis : A. macrocephala and A. lancea contained atractylenolide I and atractylenolide Ill whereas A. japonica contained atractylenolide I, atractylenolide Ill. diacetyl-atractylodiol, compound-4, compound-5. The three species of Atractylodes rhizomes showed different chromatogram patterns. Conclusions : The results could be used as discriminative criteria for Atractylodes rhizomes and as fundamental materials to researches of further pattern analysis and biological reaction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2023

This study aims to develop CLSM fill material for emergency restoration using landfill coal ash. As a result of examining physical properties such as particle size distribution and fines content of landfill coal ash, bottom ash, fly ash, and general soil were mixed, and SP was found to have a density of 2.03 and a residual particle pass rate of 7.8 %. CLSM materials that secure fluidity in unit quantities without using chemical admixtures such as glidants and water reducing agents have a high risk of material separation due to bleeding. As a result of this experiment, it was found that the bleeding ratio did not satisfy the standard in the case of the specimen with a large amount of fly ash and a lot of addition of mixing water. As a result of the compressive strength test, the strength development of 0.5 MPa or more for 4 hours was found to be satisfactory for the specimens using hemihydrate gypsum with a unit binder amount of 200 or more, and the remaining gypsum showed poor strength development. Although it is judged that landfill coal ash can be used as a CLSM material, it is necessary to identify and apply the physical and chemical characteristics of coal ash buried in the ash treatment plant of each power generation company.

• Conservation Science in Museum
• /
• v.29
• /
• pp.47-64
• /
• 2023

Daehye Bogakseonsaseo (Letters of Master Bogak) in the possession of the National Museum of Korea is a Goryeo-era book produced in 1387, which was acquired in 2005 in a state of severe general damage. Subsequently, its production techniques and materials were examined using bibliographical characteristics and scientific analysis, based on which an overall conservation treatment was carried out. Janghwang(mounting) in bibliographical characteristics is a five-hole-stitch binding (五針眼線裝本), a single-lined rectangular box (四周單邊), and no column lines. The conservation treatment was examined in two aspects: the basic form and the conservation treatment process. The book is composed of the outer cover, original cover, end paper, and inner paper of 0.04-0.07mm thick, which is significantly thinner than general book paper. The conservation treatment was applied after the entire book was disassembled, based on the assessment that both the cover and the inner sheets of paper were in a dire condition due to deterioration. The conservation treatment comprised of the process of disassembly, cleaning, reinforcement of defective parts, scanning, and binding, with a paulownia box made for its storage. At the time of disassembly, samples were made for the inner sheets and the book string in order to conduct fiber identification. The fibers were identified using Safranin and C-stains. Safranin staining identified a thick fiber wall, in addition to cross-marking, dislocation, and transparent membranes. C-stain staining identified the fiber as mulberry, given the dark red residue. The book strap has a flat, circular cross-section, and was identified as cotton fiber, since a lumen was observed in the center.

• The Korea Journal of Herbology
• /
• v.38 no.4
• /
• pp.21-29
• /
• 2023

Background : The purpose of this study was to investigate the anti-inflammatory properties of stems and leaves of Eleutherococcus senticosus (Rupr. & Maxim.) Maxim. (ES) from Gangwon-do. Methods and Results : Stems and leaves of ES were collected from two areas in Gangwon-do: Cheorwon-gun and Samcheok-si. Samples were extracted with water by using the pressurized liquid extraction method and with 70% prethanol A by using the heat reflux extraction method. The anti-inflammatory effects of ES were evaluated through the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide(MTT), lactate dehydrogenase(LDH) assay, nitric oxide(NO) assay, enzyme-linked immunosorbent assay(ELISA), and Western blot analysis in RAW 264.7 macrophages stimulated with lipopolysaccharide (LPS). 1) Results showed that ES leaf extractions were not cytotoxic at a concentration of up to 30 ㎍/㎖. The leaves of 70% prethanol A extractions of ES(30 ㎍/㎖) inhibited NO, interleukin-6(IL-6), and tumor necrosis factor-α(TNF-α) production and decreased the protein level of cyclooxygenase 2(COX-2). There was no significant change in the protein level of inducible nitric oxide synthase(iNOS). The stem extractions of ES did not exhibit anti-inflammatory effects. Conclusions : In this study, the leaves of 70% prethanol A extractions of ES demonstrated anti-inflammatory effect on RAW 264.7 macrophages. The 70% prethanol A extractions have a relatively higher anti-inflammatory effect on RAW 264.7 macrophages than water extractions.