• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.45-53
• /
• 2018

Among the various slope stabilization methods, the green soil method based on the growth of plants is advantageous to the environment, but the durability and slope stability are insufficient when the green soil method is applied to a steep slope and rock slope sites. Therefore, in this study, green soil, which improved the adhesion performance and the vegetation environment, was developed using cementitious materials and ECG, and the durability and slope stability as well as the possibility of its use as a rock vegetation base material were assessed. From the results, the adhesive force and internal friction angle were higher than that of the existing green soil so that it could be used for in situ construction. The soil hardness value was 26 mm, which was slightly higher than that of the best growth condition of the plant, 18~23 mm, and the drying shrinkage strain was approximately 3%; hence, it is not expected to affect the durability of green soil. The results of a rainfall intensity simulation for evaluating the slope adhesion force showed that slope failure did not occur under all conditions. The damage decreased with increasing slope angle. Therefore, the green soils developed in this study have excellent durability and slope stability and can be used for rock slope sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.660-667
• /
• 2018

This study examined the optimal manufacturing conditions of RDF using heat-dried sludge from sewage treatment plant in Cheonan with the oil-drying method. The amounts of oil evaporation and oil drying of the heat-dried sludge were measured at different temperatures to evaluate the value of the product. The performance of the product was then measured using a calorimeter and TGA. In addition, the concentration of odor, NH3, H2S, and TVOC during drying was determined using a portable odor-meter. Ingredient analysis was performed by EDS. Considering mass-production, the oil to heat-dried sludge weight ratio was fixed to 4:1. At $130^{\circ}C$, only physical mixing occurred after the instantaneous drying of internal water. Considering the eco-friendly aspects, there was no significant difference in the drying efficiency between $160^{\circ}C$ and $190^{\circ}C$. Therefore, the optimal conditions were a drying temperature of $160^{\circ}C$ within 5 minutes. Finally, the RDF manufactured in this study and fuel used in the thermal power plants were compared. The calorific value was 4,449kcal/kg, the water content was 2% and the ash content was 34%, which is higher than the fuel of thermal power plants. Therefore, it is believed that coal energy as well as wood pellets can be replaced.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.441-451
• /
• 2000

Sludge produced from water treatment plants contains plenty of aluminum due to addition of coagulants, polyaluminum chloride(PACI) which has been widely used in most of water treatment plants. however. the whole of PACI is imported from other countries. In this research. the effective methods for recycling PACI from sludge of water treatment plants were developed and evaluated. Aluminum chloride hexahydrate($AlCl_3{\cdot}6H_2O$) was obtained by sparging HCl gas aluminum extracted from sludge using hydrochloric acid (HCI). This aluminum chloride hexahydrate was solidified by decomposition at $180^{\circ}C$. and dissolved in water to produce PACI. The optimum extraction rate was obtained at the condition of 10 minutes of reaction time. $105^{\circ}C$ of reaction temperature. 27.65%(W/W) of HCI concentration. The KS experiment proved that manufactured aluminum chloride hexahydrate was 98.7% degree and the recycled PACI coagulants agreed with the KS standard. The optimum temperature of decomposition was $180^{\circ}C$ and the basicity of the PACI was decided upon the extent of decomposition The compared experiments between purchased coagulant and manufactured coagulant presented that both coagulants had same performance for turbidity, DOC, $UV_{254}$ absorbance. and chlorophyll-a.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.563-580
• /
• 2010

In 2009 the Korea Ministry of Environment announced 'A Comprehensive Plan for the Improvement of Sewer Service in Rural Area' aiming at reduction of the sewer service gap between urban and rural areas as well as improvement in the residential environment of the rural area. According to the plan, the sewer system supply rate for the rural area is expected to reach up to 75% until 2015 with the budget of 4.7 trillion won (Korean currency). It is not certain, however, that the increase in the sewer system supply rate will accompany improvement of water quality in receiving water because several veiled problems that can occur in small-scale sewer treatment plants are poorly addressed in the plan. In this study, those issues for the small-scale sewer treatment plants and their solutions were discussed based on a case study in which we investigated 19 treatment facilities at two rural regions in Gyeonggi province. This study also included strategies useful for the plan. From the results of investigation, some problems, e.g., high hourly variations but low in flowrates and low mass loading were commonly identified. Although operation parameters in sewer treatment plants require to be modified depending on the mass loading, most of the plants were operated with the initial design parameters which causes the decrease of removal efficiency. In the intensive diagnosis, we arranged and applied solutions (e.g., flow equalization, air on/off time control, etc) to the two selected plants and found out improvement of effluent water quality, especially organic matters (COD and SS) and T-N with better denitrification performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2021-2029
• /
• 2010

This paper suggested the method to design and analyze FMC robot's dispatching rule using the Simulation and Sequential Patterns. To do this, first of all, we built FMC using simulation and then, extracted signals that facilities call a robot, saved it as the log type. Secondly, we built robot's optimal path using the Sequential Pattern Mining with the results of analyzing the log and relationship between machine and robot actions. Lastly, we adapted it to the A corp.'s manufacturing line for verifying its performance. As a result of applying the new dispatching rule in FMC, total throughput and total flow time decrease because of decreasing material loss time and increasing robot utility. Furthermore, because this method can be applied for every manufacturing plant using simulation, it can contribute to advance total FMC efficiency as well.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.3
• /
• pp.227-233
• /
• 2014

We designed a 16-week feeding experiment to test the effects of dietary supplementation with distillers' dried grain (DDG) on the growth, feed utilization, and body composition of juvenile muddy loach Misgurnus anguillicaudatus. Seven isonitrogenous and isocaloric diets were formulated to contain 0% DDG (Control); 10%, 20%, and 30 % DDG from rice (diets RM10, RM20 and RM30); and 10%, 20%, and 30% DDG from rice and wheat flour (diets RWM10, RWM20 and RWM30), respectively. Three replicate groups of juvenile muddy loach averaging $1.5{\pm}0.10$ g were fed one of the diets to satiation twice daily. Survival of juvenile muddy loach fed the RWM20 and RWM30 diets was higher than that of the control group (P<0.05), while weight gain tended to decrease when fish were fed diets containing DDG. Weight gain of fish fed the RWM10 diet was greater than that of fish fed other diets, but the RM30 diet resulted in less weight gain than did the control (P<0.05). The feed and protein efficiency ratios of fish fed the RM10, RM20, RM30, RWM10, RWM20 and RWM30 diets were all similar to the control (P>0.05). Neither daily feed intake nor proximate composition of the whole body was affected by dietary DDG (P>0.05). The compositions of isoleucine, leucine, lysine, threonine, and valine were all elevated in fish fed the RM30, RWM10, RWM20 and RWM30 diets relative to those of other groups (P<0.05). In contrast, methionine + cystine and phenylalanine + tyrosine were all lower in fish fed the RM30, RWM10, RWM20 and RWM30 diets, as compared to those of other groups (P<0.05). Our results suggest that DDG is suitable as a partial replacement for soybean meal and wheat flour, and could be used at a rate of up to 20% for rice, or 30% for rice and wheat flour, for optimum growth performance of juvenile muddy loach.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.302-308
• /
• 2005

Nitrate is one of common contaminants frequently found in the bank filtrate. Biological autotrophic denitrification into permeable reactive barrier(PRB) system to reduce nitrate concentration in bank filtrate was implanted. The objectives of research are to investigate effect of inoculation, to evaluate alternative alkalinity sources, and to determine effect of hydraulic characteristics, such as retention time, flow rate on the performance of semi-pilot PRB system. Semi-pilot scale biological PRB system was installed using elemental sulfur and limestone/oyster shell as reactive materials near Nakdong River in Kyoungnam province, Korea. Nitrate concentration in bank filtrate was reduced by indigenous microorganisms in oyster shell as welt as by inoculating microorganisms isolated from the sludge of an anaerobic digester in a wastewater treatment plant. Oyster shell as well as limestone can be used as an alkalinity source. However, oyster shell resulted in suspended solids of effluent. As the flow rate in the system increased from 66 to 132 mL/min and accordingly the residence time decreased from 15 to 7.5 hours, nitrate concentration in effluent increased and nitrate removal efficiencies decreased from 75 to 58% at the fixed thickness of 80 cm of PRB.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.45-54
• /
• 2018

This study aimed to investigate the effects of mechanical factors such as agitation speed and air rate in fly ash flotation. Specifically, we used thermal power plant fly ash with unburned carbon content of 3.4 to 3.7%. The effect of pH, agitation speed, collector dosage, and frother dosage - the key factors of froth flotation - showed unburned carbon recovery and unburned carbon content of 63% and 34%, respectively, when the dosage of safflower oil used as collector was 800 g/ton, pH was 7, agitation speed was 1,200 rpm, and frother dosage was 400 g/ton. The SEM/EDS analysis of fly ash in that case indicated that the spherical fly ash particles lowered the unburned carbon content as they floated with the air bubbles without being dissolved in the unburned carbon or settled in the ore solution. The other experiment of changing the mechanical factors such as agitation speed and air rate resulted in unburned carbon recovery and unburned carbon content of 74% and 67%, respectively, at air rate of 8 L/min and agitation speed of 900 rpm. The recovery and unburned carbon content increased as the low agitation speed and additional air injection decreased the strength of the eddy current in the ore solution and consequently prevented the floating of fine fly ash particles with unburned carbon. In addition, the recovery rate and unburned carbon increased further to 80% and 70%, respectively, showing the best performance when the agitation speed and air rate were lowered to 800 rpm and 6 L/min, respectively.

• The Korean Journal of Mycology
• /
• v.25 no.4 s.83
• /
• pp.330-339
• /
• 1997

Botrytis cinerea T91-1 has shown to produce at least four different polygalacturonases in a liquid medium containing citrus pectin as a carbon source. One of the enzymes, its molecular weight was estimated as 37 kDa by denatured polyacrylamide gel electrophoresis, was purified by a series of procedures including acetone precipitation, ion exchange, heparin affinity, and reverse phase column chromatographies. By viscometric analysis, the enzyme was revealed as an endo-polygalacturonase. The enzyme activity was inhibited by divalent cations such as $Ca^{2+}$, $Co^{2+}$, and $Cu^{2+}$. Km and Vmax for polygalacturonic acid hydrolysis were 0.33 mg/ml and 28.6 nM/min, respectively. The optimum temperature for enzymatic activity was $55^{\circ}C$ and the enzyme showed optimal pH values between 4.0 and 4.5. The enzyme was stable up to 12 hours in the range of pH 4 to 7 and at the temperature below $30^{\circ}C$. Amino acid sequence from N-terminal up to 6 amino acids determined by Edman degradation showed little homology with polygalacturonases from fungi and plants.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.301-309
• /
• 2015

Importance of pretreatment for seawater desalination is growing rapidly. Proper selection of pretreatment is critical for the successful, long-term operation in the seawater desalination plant such as seawater reverse osmosis (SWRO). The purposes of seawater pretreatment are to remove particulate, colloidal materials, organic, inorganic materials, microorganisms and their by-products present in the seawater, and thus to improve the performance of seawater desalination systems. However, pretreatment is most challenging for designing and operating seawater desalination plants because of fluctuations of water qualities, site specifications and wide ranges of target materials present in the seawater to be treated. In addition, it is also becoming evident increasingly that microscopic algae are a major cause of operational problems, for example, membrane fouling which is long-standing problem in SWRO process. Pretreatment strategies prior to the operation of seawater desalination technologies should be even more complicated by algae blooms and release of their harmful by-products in marine environment. This paper reviews the roles of various pretreatment methods in seawater desalination process. Benefits and drawbacks are described, which should be taken into account in future studies on selecting pretreatment for seawater desalination process.