• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.80-88
• /
• 2011

Heliostat in the tower type solar thermal power plant is a sun tracking mirror system to reflect the solar energy to the receiver and the optical performance of it affects to the efficiency of whole power plant most significantly. Thus a solid understanding of heliostat's energy concentration characteristics is the most important step in designing of the heliostat field and the whole power plant. The work presented here is the analysis of energy concentration characteristics of heliostat used in 200kW solar thermal power plant, where the receiver located at 43m high in tower has $2{\times}2$m rectangular shape. The heliostat reflective surface is formed by 4 of $1{\times}1$m flat plate mirror facet and the mirror facet is mounted on the spherical frame. The direct normal incident radiation models in vernal equinox, summer solstice, autumnal equinox and winter solstice are first derived from the actually measured data. Then the intercept ratio, heat flux distribution and total energy collected at the receiver for the heliostats located in the various places of the heliostat field are investigated. Finally the effect of mirror facet installation error on the optical performance of the heliostat is analyzed.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.760-772
• /
• 1999

The CAN is a serial communication protocol for distributed real-time control and automation systems. Data generated from field devices in the distributed control of power plant are classified into three categories: real-time event data, real-time control data, non-real-time data. These data share a CAN medium. If the traffic of the CAN protocol is not efficiently controlled, performance requirements of the power plant system could not be satisfied. This paper proposes a bandwidth allocation algorithm that can be applicable to the CAN protocol. The bandwidth allocation algorithm not only satisfies the performance requirements of the real-time systems in the power plant but also fully utilizes the bandwidth of CAN. The bandwidth allocation algorithm introduced in this paper is validated using the integrated discrete-event/continuous-time simulation model which comprises the CAN network and distributed control system of power plant.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.42-47
• /
• 2008

This paper reports the system performance of a hybrid plant, which combines a renewable energy plant of GSHP(Ground Source Heat Pump) with a conventional plant (screw water chiller). To find out operational cost and operating characteristics, the performance of the hybrid system was measured in a building located in Jeju island. Based on the measured data, the operating characteristics were analyzed and the operational cost was estimated by using payment table, which was provided by the Korea Electric Power Cooperation. Operating methods to save energy were recommended.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.2
• /
• pp.106-111
• /
• 2007

Increasing genetic variability with mutagenic agents has been broadly employed in plant breeding because it has the potential to alter one or more desirable traits. In this study, a molecular analysis assessed by Amplified Fragment Length Polymorphisms(AFLPs) and a morphological analysis based on seedlings subjected to aluminum stress were compared. Also, an analysis of allelic frequencies was performed to observe unique alleles present in the pool. Genetic distances ranging from 0.448 to 0.953 were observed, suggesting that mutation inducing was effective in generating variability. The genetic distances based on morphological data ranged from 0(genotypes 22 and 23) to 30.38(genotypes 15 and 29). In the analysis of allelic frequency, 13 genotypes presented unique alleles, suggesting that mutation inducing was also targeting unique sites. Mutants with good performance under aluminum stress(9, 15, 18 and 27) did not form the same clusters when morphological and molecular analyses were compared, suggesting that different genomic regions may be responsible for their better performance.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.338-344
• /
• 2023

Curcuma longa is a plant belonging to the genus Curcuma and is distributed across various Asian regions. This plant is widely known for its rhizomes, which possess a variety of pharmacological properties. However, although the leaves and stems of this plant also contain several health-promoting secondary metabolites, very few studies have characterized these compounds. Therefore, our study sought to quantify the secondary metabolites from the leaves and stems of Curcuma longa L. (LSCL) using liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) and high-performance liquid chromatography (HPLC). Our LC-ESI-MS analyses detected twenty-one phenolic compounds in the LSCL, among which fifteen compounds were detected via HPLC analysis. Four compounds, namely vanillic acid (0.129 mg/g), p-coumaric acid (0.431 mg/g), 4-methylcatechol (0.199 mg/g), and afzelin (0.074 mg/g) were then quantified. These findings suggest that LSCL is rich in secondary metabolites and holds potential as a valuable resource for the development of functional and nutritional supplements in the future.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.819-823
• /
• 2024

The main criteria used in NEI 18-04 to define SSCs as risk-significant include (1) the SSC is required to keep all LBEs within the F-C target, and (2) the total frequency with the SSC failed exceeds 1% of the limit for at least one of the three cumulative risk metrics used for evaluating the integrated plant risk. The first one is a reasonable criterion in determining the risk significant SSCs. However, the second criterion may not be adequate to serve the purpose of determining the risk significance of SSCs. In the second criterion, the cumulative risk metric values representing the integrated plant risk (less the preventive and mitigative effects of the SSC being evaluated) are compared to a risk limit that represents a very small contribution to the overall integrated plant risk, which corresponds appropriately to the contributions from individual SSCs. The easiest approach to redefine the NEI 18-04 definition of risk-significant SSCs in relation to the integrated plant risk metrics is to compare the difference, between the risk metric value calculated with the SSC failed and the risk metric value calculated with the SSC credited, with 1% of the risk limit established for the integrated plant risk metrics.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In 2016, an earthquake occurred at Gyeongju, Korea. At the Wolsong site, the observed peak ground acceleration was lower than the operating basis earthquake (OBE) level of Wolsong nuclear power plant. However, the measured spectral acceleration value exceeded the spectral acceleration of the operating-basis earthquake (OBE) level in some sections of the response spectrum, resulting in a manual shutdown of the nuclear power plant. Analysis of the response spectra shape of the Gyeongju earthquake motion showed that the high-frequency components are stronger than the response spectra shape used in nuclear power plant design. Therefore, the seismic performance evaluation of structures and equipment of nuclear power plants should be made to reflect the characteristics of site-specific earthquakes. In general, the floor response spectrum shape at the installation site or the generalized response spectrum shape is used for the seismic performance evaluation of structures and equipment. In this study, a generalized response spectrum shape is proposed for seismic performance evaluation of structures and equipment for nuclear power plants. The proposed response spectrum shape reflects the characteristics of earthquake motion in Korea through earthquake hazard analysis, and it can be applied to structures and equipment at various locations.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.317-323
• /
• 2010

The manual ultrasonic examination for the nuclear power plant piping welds has been demonstrated by using KPD(Korean Performance Demonstration) generic procedure. For automated ultrasonic examination, there is no generic procedure and it should be qualified by using applicable automated equipment. Until now, most of qualified procedures used pulse-echo technique and there is no qualified procedure using phased array technique. In this study, data acquisition and analysis software were developed and phased-array transducer and wedge were designed to implement phased array technique for nuclear power plant in-service inspection. The developed procedure are qualified for performance demonstration for the flaw detection, length sizing and depth sizing. The qualified procedure will be applied for the field examination in the nuclear power plant piping weld inspection.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.104-110
• /
• 2017

When evaluating effectiveness of a R&D program, there is a tendency to simply compare the performances of the beneficiaries before and after the program or to compare the differences in the performances of the beneficiaries and the non-beneficiaries before-after the program. However, these ways of evaluating effectiveness of a program have some problems because they can not differentiate between complement effect, which facilitates corporate R&D investment, and substitute effect, which, literally, substitutes corporate R&D investment. Therefore, these problems could bring about wrong policies concerning R&D programs. In this paper, a new approach using path analysis is suggested as a means to overcome these problems and it is utilized, as an application, to evaluate the effectiveness of Plant Engineering Program conducted by Ministry of Trade, Industry & Energy, Korea. First, the direct impact of government R&D investment on corporate R&D investment is analyzed, through which it is identified which of crowding-in effect (complement effect) and crowding-out effect (substitute effect) is dominant. Next, the direct effect of government R&D investment on corporate performance and the direct effect of corporate R&D investment on corporate performance is analyzed respectively. Finally, by combining the two previous analysis, the total effect of government R&D investment on corporate performance is identified. As a result, it turns out that, in Plant Engineering Program, crowding-in effect is more dominant than crowding-out effect and that Plant Engineering Program has definitely positive effect on the beneficiary in terms of corporate performance indirectly and directly.

• Plant Journal
• /
• v.16 no.4
• /
• pp.26-32
• /
• 2020

The performance monitoring system in the power plant should have the capability to estimate power generation efficiency accurately. Several power generation efficiency models have been proposed for the combined heat and power (CHP) plant which produces both electricity and process steam(or heating energy, hereinafter expressed by process steam only). However, most of the models are not sufficiently accurate due to the wrong evaluation of the process steam value. The study suggests Electricity Conversion Efficiency (ECE) model with determination of the heat rate of process steam using operational data. The suggested method is applied to the design data and the resulted trajectory curve of power generation efficiency meets the data closely with R2 99.91%. This result confirms that ECE model with determination of the model coefficient using the operational data estimate the efficiency so accurately that can be used for performance monitoring of CHP plant.