• Title/Summary/Keyword: Plank

Search Result 138, Processing Time 0.026 seconds

Simple Bond Stress and Slip Relationship between CFRP Plank and Cast-in-Place DFRCC (탄소섬유 FRP판과 현장타설 고인성섬유보강콘크리트 사이의 단순 부착슬립 관계)

  • Yoo, Jun-Sang;Yoo, Seung-Woon
    • Journal of the Korean Society for Advanced Composite Structures
    • /
    • v.7 no.1
    • /
    • pp.25-31
    • /
    • 2016
  • Bond stress between cast-in-place ductile fiber reinforced cementitious composites and CFRP plank were experimentally analyzed. As failure shape, the mixture of failure between CFRP plank and epoxy, and failure between concrete and epoxy was shown. In case of RFCON from the suggested simple bond slip relationship, the maximum average bond stress was 5.39MPa, the initial slope was 104.09MPa/mm, and the total slip length was 0.19mm. PPCON showed the maximum average bond stress of 4.31MPa, the initial slope of 126.67MPa/mm, and the total slip length of 0.26mm, while RFCON+ appeared to have 8.71MPa, 137.69MPa/mm, 0.16mm. PPCON+ had 6.19MPa maximum average bond stress, 121.56MPa/mm initial slope, and 0.34mm total slip length. To comprehend the behavior of composite structure of FRP and concrete, local bond slip relation is necessary, and thus a simple relation is suggested to be easily applied on hybrid composite system.

Effect of Rehabilitation Exercise for Golfers on the X-factor and Ground Reaction Force according to Phase of the Golf Swing

  • yoon, Junggyu;Cho, Byungyun
    • Journal of International Academy of Physical Therapy Research
    • /
    • v.10 no.1
    • /
    • pp.1706-1710
    • /
    • 2019
  • Background: Despite frequent shoulder injuries of rotator cuff muscle of golfers by the result of overuse and poor swing mechanics, there is little research on shoulder specific rehabilitation exercises for injured rotator cuff muscle and golf swing Objective: To examined the effect of rehabilitation exercise for golfers on the X factor and ground reaction force (GRF) according to phase of the golf swing. Design: Crossover study Methods: The participants were 13 amateur golfers selected for a 4 week rehabilitation exercise for golfers. A rehabilitation exercise for golfers consisting of 5 steps and 4 items (sleeper stretch, full side plank, push up to plank, high plank knee unders) were applied to all participants. A three dimensional motion analyzer and force platform (SMART-E, BTS, Italy) were used to measure the X factor (angle between shoulder and pelvis at top of back swing) and GRF according to phase of the golf swing. All dependent variables were measured before and after exercise. The collected data was analyzed using the paired t test and SPSS 21.0. Results: The GRF had a statistically significant increase in the impact phase and ratio impact/weight after rehabilitation exercise for golfers (p<.05). The X-factor, GRF in top of back swing and finish were no significant differences between before and after exercise (p>.05). Conclusions: These results suggested that rehabilitation exercise for golfers was effective for increasing GRF in the impact phase and ratio impact/weight for amateur golfer.

Effects of Angle of Foot-Bar and Knee Posture on Core Muscle Activity during Pilates Reformer High-Plank

  • Kihong Kim;Hanna Choi;Hwanjong Jeong
    • International Journal of Internet, Broadcasting and Communication
    • /
    • v.16 no.1
    • /
    • pp.156-162
    • /
    • 2024
  • The purpose of this study was to investigate the muscle activity of internal oblique, rectus femoris, and multifidus according to knee posture and foot bar angle during pilates reformer high flank exercise. Twelve women in their 20s were recruited within six months of their experience as pilates instructors. The subjects performed six types of high flanks according to knee posture and foot bar angle. EMG signals of internal oblique, rectus femoris, and multifidus during exercise were measured and analyzed by integral EMG. The collected data were processed by repeated measures two-way ANOVA. In this paper it shows the following results. First, internal oblique iEMG was not significantly different according to knee posture and foot bar angle. Second, the rectus femoris had an interaction effect according to knee posture and foot bar angle. Third, there was no significant difference in multifidus according to knee posture and foot bar angle. In conclusion, according to the exercise method, the activity of the rectus femoris was the highest in the knee bending and high foot-bar angle high plank exercise, and there was no difference between the internal oblique and multifidus.

An Experimental Study for Flexure/Shear Failure Behavior of Composite Beam with GFRP Plank Used As a Permanent Formwork and Cast-in-place High Strength Concrete (영구거푸집으로 사용한 유리섬유 FRP 판과 현장타설 고강도콘크리트로 이루어진 합성보의 휨/전단파괴거동에 관한 실험적 연구)

  • Yoo, Seung-Woon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.6
    • /
    • pp.4245-4252
    • /
    • 2015
  • In this study, an experiment which utilized glass fiber reinforced polymer(GFRP) plank as the permanent formwork of cast-in-place high strength concrete structures was performed. The GFRP plank currently being produced has smooth surface so that it causes problems in behavior with concrete. Therefore, this research analyzed the flexure/shear failure behavior of composite beams, which used GFRP plank as its permanent formwork and has short shear span ratio, by setting the sand coated at GFRP bottom surface, the perforation and interval of the GFRP plank web, and the width of the top flange as the experimental variables. As a result of the experiments for effectiveness of sand attachment in case of not perforated web, approximately 47% higher ultimate load value was obtained when the sand was coated than not coated case and bending/shear failure mode was observed. For effectiveness of perforation and interval of gap, approximately 24% higher maximum load value was seen when interval of the perforation gap was short and the fine aggregate was not coated, and approximately 25% lower value was observed when the perforation gap was not dense on the coated specimen. For effectiveness of top flange breadth, the ultimate load value was approximately 17% higher in case of 40mm than 20mm width.

초지관리기술

  • Plank, R.D.
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.2 no.2
    • /
    • pp.26-28
    • /
    • 1981
  • PDF

A study of global minimization analaysis of Langevine competitive learning neural network based on constraction condition and its application to recognition for the handwritten numeral (축합조건의 분석을 통한 Langevine 경쟁 학습 신경회로망의 대역 최소화 근사 해석과 필기체 숫자 인식에 관한 연구)

  • 석진욱;조성원;최경삼
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1996.10b
    • /
    • pp.466-469
    • /
    • 1996
  • In this paper, we present the global minimization condition by an informal analysis of the Langevine competitive learning neural network. From the viewpoint of the stochastic process, it is important that competitive learning guarantees an optimal solution for pattern recognition. By analysis of the Fokker-Plank equation for the proposed neural network, we show that if an energy function has a special pseudo-convexity, Langevine competitive learning can find the global minima. Experimental results for pattern recognition of handwritten numeral data indicate the superiority of the proposed algorithm.

  • PDF

Surface Reconstruction Using Statistical Techniques (통계 기법을 이용한 곡면 복원)

  • Yoon, Min-Cheol;Lee, Yun-Jin;Lee, Seung-Yong;Ivrissimtzis, Ioannis;Seide1, Hans-Peter
    • Journal of the Korea Computer Graphics Society
    • /
    • v.11 no.2
    • /
    • pp.47-55
    • /
    • 2005
  • 곡면 복원이나 곡면 복원과 질은 관련이 있는 노말 추정을 하는 대부분의 방법은 결정론적인 알고리즘을 사용한다. 결정론적 알고리즘은 속도가 빠르고, 오차가 크지 않은 입력에 대해서는 좋은 질의 곡면 복원을 할 수 있다. 그러나 결정론적 방법의 특성상 이상치나 노이즈를 가진 데이터에 대해서는 안정된 복원 결과를 얻을 수 없다. 본 논문에서는 앙상블이라고 불리는 통계적인 방법을 사용해서 곡면 복원과 노말 추정을 하는 기존의 알고리즘을 개선한다. 앙상블 기법은 먼저 입력 점 집합을 무작위로 샘플링해서 점 집합의 부분집합을 만든다. 그리고 나서 만들어진 부분 집합에 독립적으로 결정론적인 알고리즘을 적용하여 결과를 얻어낸다. 마지막으로, 각각의 서로 다른 결과를 결합하여 더 우수한 최종결과를 얻어낸다. 널리 쓰이는 노말 추정 기법[11]과 Multi-level Partitions of Unity implicit [18]를 사용해서 앙상블이 효과적으로 노이즈가 많은 데이터를 처리할 수 있는 것을 보여준다.

  • PDF

EPNP Solver를 이용한 나노포어의 이온전류와 이온전도도 계산

  • Byeon, Min-Hyeon;Hwang, Hyeon-Seok
    • Proceeding of EDISON Challenge
    • /
    • 2015.03a
    • /
    • pp.83-90
    • /
    • 2015
  • 본 연구에서는 Poisson-Nernst-Plank (PNP) 식의 해를 구할 수 있는 Edison web-based Poisson-Nernst-Plank (EPNP) Solver를 이용하여 나노포어의 이온선택성 및 박막의 유전율, 그리고 이온 농도가 이온 전류와 이온전도도에 미치는 영향에 대해 알아보았다. 계산 결과로부터 나노포어의 이온선택성에 의해 양이온이 이온전류에 미치는 영향이 매우 크며, top buffer와 bottom buffer의 농도가 증가할수록 이온 전도도 (ion conductance)가 비선형적으로 증가함을 알 수 있었다. top buffer와 bottom buffer 간에 농도 차가 있을 때는 농도 차와 나노포어의 이온선택성에 의해 형성되는 Nernst 전위의 영향으로 I-V 곡선이 비대칭적 형태임을 알 수 있었다. 또한, 나노포어의 상대 유전율을 증가시킬 때 I-V 곡선에서의 양이온 전류는 감소했지만 음이온의 전류는 증가하는 경향을 보였다. 이는 나노포어 내에 배열된 쌍극자에 의한 영향과 전하를 가진 입자가 유전경계 (dielectric boundary)에 접근하면서 형성되는 상전하에 의한 영향이 동시에 존재하기 때문임을 알 수 있었다.

  • PDF