• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.201-209
• /
• 2016

Supercavitation is a technology that reduces frictional resistance of an underwater vehicle by surrounding it with bubbles. Supercavity is divided into natural supercavity and ventilated supercavity which is formed by artificially supplying gas. Planing forces are present when a section of the underwater vehicle goes outside of the cavitation region in the supercavity condition. Planing often leads to an unstable flight because it acts vertically on the body suddenly. In this paper, a relationship between the ventilation rate and the cavitation number is determined. Based on the relationship, desired cavitation number which can avoid to planing is determined and then ventilation controller is designed. The performance of the ventilation controller is verified with a depth change controller using the cavitator. Simulation results show that the ventilation controller can minimize the planing force and moment.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.10-17
• /
• 2016

When a planing hull straightly runs and turns, its floating position and pitch angle are changed depending on its speed, and large transient motion happens. In this paper, six degrees of freedom(6 DOF) equations of motion, which could simulate the motion of a planing hull, are established. Static and dynamic forces in vertical plane are modeled using pre-calculated displacements and metacentric heights depending on various draft, lift under bottom, and vertical damping coefficients which are used to tune the final motion. Hydrodynamic coefficients in horizontal plane at various equilibrium state are calculated by using Lewandowski's empirical formula and the speed-dependent equilibrium state are calculated beforehand by Savitsky's formula. The speed effects are considered by curve-fitting the coefficients at various speed to the polynomials. Accelerating, decelerating and backing, turning, and zig-zag are simulated and compared with the sea trial results, and it is confirmed that the speed reduction, roll, and pitch during such maneuvers of sea trial and simulation are well consistent.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권9호
• /
• pp.521-528
• /
• 2004

The demise of the native franchise markets and the emergence of competitive markets in electricity generation service is substantially altering the way that operation and planning activity is conducted and is making it increasingly difficult for market participants such as generation firms to prospect the future electricity markets. Traditional generation expansion planning (GEP) problems which centrally determine the least-cost capacity addition plan that meets forecasted demand within pre-specified reliability criteria over a planning horizon (typically 10 to 20 years) is becoming no more valid in competitive market environments. Therefore, it requires to develop a new methodology for generation investments, which is applicable to the changed electric industry business environments and is able to address the post-privatization situation where individual generation firms seek to maximize their return on generation investments against uncertain market revenues. This paper formulates a new generation expansion planning problem and solve it in a market-oriented manner.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 1999년도 춘계공동학술대회: 지식경영과 지식공학
• /
• pp.403-413
• /
• 1999

Today's businesses are experiencing intensive global competition and the most accelerating pace of change ever. Competitors have sprung up that were not even on the business's radar. This environment impacts all decisions and strategies as business try to dominate their market or their industry merely to survive. So recently most of organizations are considering on building the data warehouse system to pursuit the business intelligence. We need the proper model to guide the approach to plan building data warehouse system when we want to plan it in considering the organizational status. Therefore we suggest a model to decide the approach to build data warehouse considering the project's environmental factors. First we review Ronald S. Swift(1998)'s five environmental factors that we have to consider when planing to build data warehouse. Then we propose a model to decide DW approach by the degree of those factors to be measured. DW approaches in this model are classified in conservative approach, technological approach, increasing approach. enterprise- wide approach, and ideal approach.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.403-413
• /
• 1999

Today's businesses are experiencing intensive global competition and the most accelerating pace of change ever. Competitors have sprung up that were not even on the business's radar. This environment impacts all decisions and strategies as business try to dominate their market or their marker or their industry merely to survive. So recently most of organizations are considering on building the data warehouse system to pursuit the business intelligence. We need the proper model to guide the approach to plan building data warehouse system when we want to plan it in considering the organizational status. Therefore we suggest a model to decide the approach to build data warehouse considering the project's environmental factors. First we review Ronald S. Swift(1998)'s five environmental factors that we have to consider when planing to build data warehouse. Then we propose a model to decide DW approach by the degree of those factors to be measured. DW approaches in this model are classified in conservative approach, increasing approach, enterprise wide approach, and ideal approach.

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.79-85
• /
• 2015

Modeling and simulation has widely been used in the weapon systems acquisition, the military training, and the warfighting experimentation. A study of the warfighting experimentation had been relatively scarce in comparison to other fields (acquisition, training). The main reasons are 1) reliability of simulation model isn't sufficient and 2) collaboration between professional groups is too difficult. To solve this problem, the application framework of warfighting experimentation for military operations was proposed. And through the framework, the case study about sea fight was fulfilled. This framework provides connectivity between warfighting experimentation and military operations planning procedure. With improved reliability, active application of warfighting experimentation could contribute to fighting capability.

• 한국지리정보학회지
• /
• 제22권3호
• /
• pp.99-106
• /
• 2019

최근 자율주행 분야가 4차 산업혁명 시대에 맞이하여 주요한 기술분야로 각광받고 있다. 자율주행 분야는 4차 산업의 핵심 기술의 집합체라고 볼 수 있는데, 이 중 자율주행 지원을 위한 정밀도로 지도 및 도로시설물 구축을 위한 DB 분야가 필수적인 부분이다. 기존 2차원 자료형식으로 제작되고 관리되던 지도 DB가 3차원으로 급격히 변화하고 있으며, 더불어 이러한 정밀도로 지도를 구축을 위한 핵심기술로 Mobile Mapping System(MMS)가 활발히 이용되고 있다. 특히 MSS에서 획득되는 다양한 자료 중에서 LiDAR를 통해 취득되는 정밀 Point Cloud는 정확한 위치 정보를 포함하고 있어, 정밀도로 지도 구축 및 도로시설물 관리 등을 위한 다양한 관련 DB 구축에 활용되고 있다. 하지만 현재는 정밀도로 지도 제작 시 3D 모델링을 위한 기반 데이터로만 활용되는 것으로만 국한되어 그 사용 범위가 넓지 않은 문제가 있다. 본 연구에서는 MMS 취득자료의 활용성을 높이기 위하여 MMS LiDAR Point Cloud를 활용하여 도로 주변 시설물을 추출하고, 그 위치를 현장조사 성과와 중첩하여 비교 분석하여 그 위치 정확도에 기준한 도로시설물 분야 활용성을 확인하고자 하였다. Point Cloud로부터 전신주와 통신지주 DB를 구축하고 도로명주소기본도와 위치 비교를 수행한 결과, Point Cloud에서 추출한 시설물 DB의 위치 정확도는 도로명주소기본도 보다 높은 것으로 확인되었다. 이를 통해 MMS Point Cloud 자료를 도로시설물 관리 분야에 충분히 활용하는 것이 가능하며, 추후 이를 통해 도로시설물 지도 확대 구축하고, 도로대장 관리 등에 적용하는 연구가 필요 할 것으로 판단된다.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.200-211
• /
• 1997

Most recently, offshore Engineering & Construction field is concerned about integration management technology such as CIM(Computer Integrated Manufacturing), PDM(Product Data Management) and Enterprise Information Engineering in order to cope with the rapid change of engineering and manufacturer specification as per owner's requirement during construction stage of the project. System integration and integrated data modeling with relational database in integration management technology improve the quality of product and reduce the period of the construction project by reason of owing design information jointly. This paper represents the design methodology of system integration using Business Process Reengineering by the case study. The case study is about the offshore plant material information process from front end engineering design to detail engineering for the construction and the basis of monitoring system by integrating and sharing the design information between the 2D intelligent P&ID and 3D plant modeling using relational database. As a result of the integrated data modeling and system integration, it is possible to maintain the consistency of design process in point of view of the material balancing and reduce the design assumption/duration. Near future, this system will be expanded and connected with the MRP(Material Requirement Planing) and the POR (Purchase Order Requisition) system.

• 대한토목학회논문집
• /
• 제32권3D호
• /
• pp.259-267
• /
• 2012

건설자동화 시스템 개발은 건설업이 당면하고 있는 여러 가지 어려움을 해결하고 급변하고 있는 건설환경을 위한 대응책으로 설득력 있는 해결책 중의 한가지로 제안되고 있다. 2006년부터 지능형 굴삭시스템 개발을 위한 연구가 진행되었다. 지능형 굴삭시스템은 작업환경 센싱, 3D 모델링, 작업계획, 작업경로계획, 무인조정 및 정보관리를 위한 다양한 기능을 갖고 있다. 본 논문에서는 지능형 굴삭시스템을 실제 현장에 적용하기 위하여 필요한 요소기술 중의 하나인 작업계획 및 작업경로계획 기능구현을 위한 공간정보모델과 작업경로 시뮬레이터를 제시하고자 한다. 기존의 자료구조인 쿼드트리나 옥트리 구조가 갖고 있는 단점을 보완하기 위하여 토공작업을 위한 새로운 자료구조를 제시하였다. 작업경로 시뮬레이터는 작업환경에 관한 정보, 토공장비에 관한 정보를 제공하며 작업자의 휴리스틱을 고려하여 효과적인 작업경로를 생성할 수 있다. 시뮬레이터에 의하여 생성된 작업경로와 굴삭기 운전자가 제안하고 있는 작업경로를 서로 비교하였다.

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.421-428
• /
• 2011

국내 토목분야의 건설산업에서는 비효율적인 의사소통으로 인하여 발생하는 업무전환 단계에서의 정보누락 및 그로 인한 비용손실 등의 문제점을 해소시키기 위한 획기적인 해결책으로 BIM의 도입이 대두되고 있다. BIM은 구조물의 생애주기 전 단계에서 발생되는 모든 정보들을 3차원 파라메트릭 CAD와 연계된 3차원 정보모델을 통하여 관리하여 정보활용의 효율성을 극대화시킨다. 본 논문에서는 BIM기반의 교량건설 프로젝트의 구조설계 업무에서 사용할 목적으로 강상자형 교량의 3차원 정보모델을 활용한 내진해석 프로세스를 제안하였다. 또한 3차원 정보모델의 속성정보들이 구조적 데이터를 내재할 수 있도록 하기 위하여 3차원 모델링작업이 구조설계 업무를 통하여 결정되는 정보들을 활용하여 이루어질 수 있도록 하는 프로세스를 제안하였다. 제시된 프로세스는 현재 건설이 진행 중인 강상자형 교량을 적용하여 구성하였다. 또한 프로세스를 적용하여 내진해석의 최종 산출물인 내진계산서의 도출이 가능하다.