• Nuclear Engineering and Technology
• /
• v.23 no.1
• /
• pp.41-48
• /
• 1991

Many of the analyses of the transient radionuclide migration are approximated by an one-dimensional geometry and/or planar geometry. To validate these approximations, one should prove that these are reasonable and proper approximations. In this paper, the approximation which was in the study of the transport through backfill into a fissure is tried to validate. In that analysis, a cylindrical geometry was approximated by a planar geometry. The numerical illustrations show that the planar approximation agrees very well with the result of the cylindrical geometry for a ratio of the backfill outer radius to the waste form radius closed to unity. Even for a larger ratio of the two radii, the numerical difference is relatively small. Also the planar approximation which was used in the analysis gives conservative estimates.

• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.17-21
• /
• 2003

In this paper, we design an optimal planar array geometry for maximum side-lobe reduction. The concept of thinned array is applied to obtain an optimal two dimensional(2-D) planar array structure. First, a 2-D rectangular array with uniform spacing is used as an initial planar array structure. Next, we modify the initial planar array geometry with the aid of thinned array theory in order to reduce the maximum side-lobe level. This is implemented by a genetic algorithm under some constraint, minimizing the maximum side-lobe level of the 2-D planar array. It is shown that the optimized planar array structure can achieve low side-lobe level without optimizing the excitations of the array antennas.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.571-574
• /
• 2005

We demonstrated a high speed liquid crystal (LC) display mode based on a nonchiral smectic C LC in an antiparallel planar geometry. In this antiparallel planar nonchiral smectic C (APNSC) LC mode, analog gray scales and wide viewing properties are achieved using a stepwise thermal annealing process (STAP). Because of an initially stable LC alignment in large area through the STAP, the APNSC LC mode exhibits the characteristics of fast response and high contrast ratio. This new APNSC mode is suitable for processing the dynamic image at a video rate in the next-generation LCDs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.107-108
• /
• 2007

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1658-1665
• /
• 1989

Reactor design considerations over several critical parameters for a planar type reactive ion etcher are given. The etch uniformity is taken as a principal design constraint. The characteristics of economicaly available vacuum pumping system are taken as practical design constraints. A set of theoretical conditions on the chamber geometry and on the gas delivery and vacuum system, that satisfy the design constraints, are derived from basic properties of RF glow discharge and gas dynamics. The theoretical results are applied to decide design parameters of a practical single-wafer-per-chamber planar type reactive ion etching machine.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.53-56
• /
• 2004

In this letter, we propose a novel design scheme for an optimal non-uniform planar array geometry in view of maximum side-lobe reduction. This is implemented by a thinned array using a genetic algorithm. We show that the proposed method can maintain a low side-lobe level without pattern distortion during beam steering.

• East Asian mathematical journal
• /
• v.39 no.4
• /
• pp.479-492
• /
• 2023

Although Euclidean plane geometry is implemented in the middle school course, there are three major problems in high school space geometry that can be intuitively taken for granted or misinterpreted as circular arguments. In order to solve this problem, this study proved three major problems using sets, Euclidean plane geometry, and parallel line postulates. This corresponds to a logical sequence and has mathematical and mathematical educational values. Furthermore, it will be possible to configure spatial geometry using sets, and by giving legitimacy to non-Euclidean spatial geometry, it will open the possibility of future research.

• Journal of KIBIM
• /
• v.9 no.2
• /
• pp.21-28
• /
• 2019

Recently, many scan projects are gradually increasing for maintenance, construction. The scan data contains useful data, which can be generated in the target application from the facility, space. However, modeling the scan data required for the application requires a lot of cost. In example, the converting 3D point cloud obtained from scan data into 3D object is a time-consuming task, and the modeling task is still very manual. This research proposes Scan-to-Geometry Mapping Rule Definition (S2G-MD) which maps point cloud data to geometry for irregular building plane objects. The S2G-MD considers user use case variability. The method to define rules for mapping scan to geometry is proposed. This research supports the reverse engineering semi-automatic process for the building planar geometry from the user perspective.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.91-97
• /
• 2010

Micro-abrasive Jet Machining is one of the new technology which enables micro-scale machining on the surface of high brittle materials. In this technology it is very important to fabricate a mask that prevents excessive abrasives not to machine un-intend surface. Our previous work introduced the micro-stereolithography technology for the mask fabrication. And is good to not only planar material but also for non-planar materials. But the technology requires a 3 dimensional mask CAD model which is perfectly matched with the surface topology of parent material as an input. Therefore there is strong need to develop an automated modeling technology which produce adequate 3D mask CAD model in fast and simple way. This paper introduces a fast and simple mask modeling algorithm which represents geometry of models in voxel. Input of the modeling system is 2D pattern image, 3D CAD model of parent material and machining parameters for Micro-abrasive Jet Machining. And the output is CAD model of 3D mask which reflects machining parameters and geometry of the parent material. Finally the suggested algorithm is implemented as software and verified by some test cases.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1170-1176
• /
• 2005

The structures and conformations of ortho-, meta-, and para-methyl red (MR) upon proton gain and loss were studied by density functional calculations, and compared to methyl yellow for the effects of a carboxyl substitution. Internal hydrogen bonding causes the geometry of neutral o-MR planar, otherwise twist. Monoprotonated species of MR are planar where the proton is attached to $\beta$-azo nitrogen. This loses its azo character a bit, and shows strong delocalization characterized as a quinonoid canonical structure. Di-protonated species of MR is proved to hold two protons at the amino and $\alpha$-azo nitrogen atoms, and planar. It regains somewhat of its azo character, but still shows fairly delocalized property in terms of carbocationic canonical structures. The carboxyl substitution on 4-dimethylamino-trans-azobenzene structure has some delocalization effects on the geometry or conformation of MR derivatives whether neutral, mono-, di- or de-protonated.