• 제목/요약/키워드: Planar Array

검색결과 224건 처리시간 0.02초

스트립 급전 평면 모노폴 배열을 이용한 직사각형 방사패턴 기지국용 안테나 (Base Station Antenna with Rectangular Radiation Pattern using Strip Feeding Planar Monopole Array)

  • 신헌철;문상만;우종명
    • 한국전자파학회논문지
    • /
    • 제12권6호
    • /
    • pp.1018-1024
    • /
    • 2001
  • 본 논문에서는 시가지 마이크로 셀에 적합한 직사각형 방사 패턴을 갖는 이동통신 기지국용 배열 안테나의 설계 방법을 제안하였으며, 직사각형 방사패턴을 만들기 위해서 수정된 Woodward-Lawson 법을 사용하여 여진 전류를 계산하여 설계하였다. 안테나의 패턴을 확인하기 위하여 주파수 2 GHz 대역에서 12 배열로 스트립선로를 사용하여 전력분배 및 급전하였고, 안테나는 평면형 모노폴을 배열하여 전력 분배기와 안테나를 일체화시킨 형태로 설계 및 제작하여 제특성을 측정하였다. 패턴 측정 결과 단변과 장변이 5 dB 차이 나는 원하는 직사각형 빔 패턴을 얻을 수 있었다.

  • PDF

Halbach 배열을 가진 SPMPM의 특성해석에 관한 연구 (Characteristics Analysis of Synchronous Permanent Magnet Planar Motor with Halbach Array)

  • 주건배;황예;이동엽;김규탁
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제55권9호
    • /
    • pp.465-471
    • /
    • 2006
  • In this paper, a synchronous permanent magnet planar motor (SPMPM) with Halbach array is proposed. First, we give the equations of the magnetic scalar potential and a series of boundary conditions. The magnetization and flux density distribution of Halbach array are obtained by analytical method; then, the characteristics of this SPMPM such as inductance, back-EMF, and thrust are evaluated. At last, the experiment results are used to verify the analysis property of this SPMPM. By comparison, it can be concluded that the analysis of SPMPM with Halbach magnet array is credible and feasible.

평면 배열 안테나를 이용한 수선 지역 형태에 적합한 빔 형성 방법에 관한 연구 (A Study on the Beam forming method suitable receive area shape using planar array antenna)

  • 이봉수;장재철;안도희
    • 한국컴퓨터정보학회논문지
    • /
    • 제8권1호
    • /
    • pp.90-96
    • /
    • 2003
  • 본 논문에서는 N개의 등방성 점원을 수신 지역과 동일한 구조로 배열하고 수신 지역과 동일한 방사패턴을 갖는 배열 구조에 대하여 연구하였다. 배열된 소자 간격은 그레이팅 로브를 피하면서 최적의 특성을 얻기 위하여 반파장 등간격으로 선택하였고, 각 배열 구조의 어레이 팩터를 유도한 후, 방사패턴을 이론적으로 계산하였다. 계산된 특성으로부터 각 평면 배열 안테나의 방사패턴은 수신 지역의 구조와 유사한 빔 특성을 얻을 수 있었다.

  • PDF

X밴드용 다이폴 급전 평면배열 안테나 설계 및 제작 (Design and Fabrication of the Dipole-Fed Planar Array Antenna at X-Band)

  • 문성익;양두영
    • 대한전자공학회논문지TC
    • /
    • 제39권5호
    • /
    • pp.251-258
    • /
    • 2002
  • 본 논문에서는 기존외 야기-우다 안테나 배열이론을 마이크로스트립 안테나에 접목시킨 X밴드용 다이폴 급전 평면배열 안테나를 설계하고 제작하였다. 그리고 넓은 대역폭을 갖는 무선통신 시스팀에 쉽게 적용시킬수 있는 다이폴 급전 평면배열 안테나의 설계 절차에 대하여 기술하였다. 또한 FDTD 수치해석법을 이용하여 안테나의 복사특성, 반사손실과 대역폭을 개선시켰으며 제작을 통해 평면형 안테나 해석의 타당성을 입증하였다. 제작한 결과, 10GHz의 중심주파수에서 안테나의 이득은 4.9dBi이고 대역폭은 약 40%, 전후방비는 16dB, E면과 H면의 반 전력 빔폭은 각각 117°와 156°이다. VSWR<2를 기준으로 했을 때, 7.4GHz∼11.88GHZ의 주파수 범위에서 측정결과와 이론적인 결과가 비교적 잘 일치하였다.

Optimal Planar Array Architecture for Full-Dimensional Multi-user Multiple-Input Multiple-Output with Elevation Modeling

  • Abubakari, Alidu;Raymond, Sabogu-Sumah;Jo, Han-Shin
    • ETRI Journal
    • /
    • 제39권2호
    • /
    • pp.234-244
    • /
    • 2017
  • Research interest in three-dimensional multiple-input multiple-output (3D-MIMO) beamforming has rapidly increased on account of its potential to support high data rates through an array of strategies, including sector or user-specific elevation beamforming and cell-splitting. To evaluate the full performance benefits of 3D and full-dimensional (FD) MIMO beamforming, the 3D character of the real MIMO channel must be modeled with consideration of both the azimuth and elevation domain. Most existing works on the 2D spatial channel model (2D-SCM) assume a wide range for the distribution of elevation angles of departure (eAoDs), which is not practical according to field measurements. In this paper, an optimal FD-MIMO planar array configuration is presented for different practical channel conditions by restricting the eAoDs to a finite range. Using a dynamic network level simulator that employs a complete 3D SCM, we analyze the relationship between the angular spread and sum throughput. In addition, we present an analysis on the optimal antenna configurations for the channels under consideration.

2차원 평면배열 수중 음향 트랜스듀서 내 상호간섭 저감 방안 연구 (A study on the reduction of crosstalk in a two-dimensional planar array of underwater acoustic transducers)

  • 박해준;노용래
    • 한국음향학회지
    • /
    • 제35권5호
    • /
    • pp.349-357
    • /
    • 2016
  • 본 연구에서는 평면배열 수중 음향 트랜스듀서 내 소자들간의 상호간섭을 저감시키기 위한 다양한 구조적 방안을 제안하고, 각 방안의 효용성을 유한 요소해석을 통해 분석하였다. 그 결과, 소자들 사이의 커프의 깊이는 깊을수록, 커프의 너비는 넓을수록, 커프 충진재의 탄성계수는 낮을수록 상호간섭 저감 효과가 높게 나타났다. 본 연구의 결과는 평면배열형 수중 음향 트랜스듀서의 성능을 극대화시키기 위한 구조 설계에 유용하게 사용될 수 있을 것으로 기대된다.

Depth-dependent EBIC microscopy of radial-junction Si micropillar arrays

  • Kaden M. Powell;Heayoung P. Yoon
    • Applied Microscopy
    • /
    • 제50권
    • /
    • pp.17.1-17.9
    • /
    • 2020
  • Recent advances in fabrication have enabled radial-junction architectures for cost-effective and high-performance optoelectronic devices. Unlike a planar PN junction, a radial-junction geometry maximizes the optical interaction in the three-dimensional (3D) structures, while effectively extracting the generated carriers via the conformal PN junction. In this paper, we report characterizations of radial PN junctions that consist of p-type Si micropillars created by deep reactive-ion etching (DRIE) and an n-type layer formed by phosphorus gas diffusion. We use electron-beam induced current (EBIC) microscopy to access the 3D junction profile from the sidewall of the pillars. Our EBIC images reveal uniform PN junctions conformally constructed on the 3D pillar array. Based on Monte-Carlo simulations and EBIC modeling, we estimate local carrier separation/collection efficiency that reflects the quality of the PN junction. We find the EBIC efficiency of the pillar array increases with the incident electron beam energy, consistent with the EBIC behaviors observed in a high-quality planar PN junction. The magnitude of the EBIC efficiency of our pillar array is about 70% at 10 kV, slightly lower than that of the planar device (≈ 81%). We suggest that this reduction could be attributed to the unpassivated pillar surface and the unintended recombination centers in the pillar cores introduced during the DRIE processes. Our results support that the depth-dependent EBIC approach is ideally suitable for evaluating PN junctions formed on micro/nanostructured semiconductors with various geometry.

슬롯라인 결합을 이용한 능동 위상배열안테나에 관한 연구 (A study on the active phased array antennas with slotline coupling)

  • 문철;김선택;윤영중;박한규
    • 한국통신학회논문지
    • /
    • 제22권5호
    • /
    • pp.981-989
    • /
    • 1997
  • In this paper, the 5-element active phased array antennas coupled through slotline between elements are designed and fabricated. A recent studies on the active phased array antennas using the transmission line coupling which can be designed to provide strong coupling and the appropriate coupling phase. But this sturucture has limitation of expanding in two dimensions for planar active phased array antennas and distortion of the radiation pattern caused by coupling network. Thus our work proposes the slotline coupling structure asthe broadband coupling network for the active phased array antenna. In experiment, 5-elements active phased array antenas have steering range from -30.deg. to 20.deg. off broadside as the free-running frequencies of end elements are controlled. The overall results show that the proposed slotline coupling structure is suited for the coupling network in the actie phased array antenna system. And the proposed coupling structire solves the expansion problem and eliminates the distortion of the radiation pattern caused by the spurious radiation of the transmission line coupling network. Thus thiscan be expanded to two dimensional coupling network for the planar active phased array antenna system.

  • PDF

착저 원통형 물체 탐지를 위한 소나 어레이 설계 (Design of SONAR Array for Detection of Bottoming Cylindrical Objects)

  • 김선호;정장원;온백산;임성빈;서익수
    • 전자공학회논문지
    • /
    • 제54권3호
    • /
    • pp.15-21
    • /
    • 2017
  • 능동 소나시스템에서 수신 신호의 해상도를 높이기 위한 방법은 다양하게 연구되어 왔다. 본 논문에서는 착저 물체의 탐지 해상도를 높이기 위한 방법으로 소나의 평면 배열 (planar array) 설계를 수행하였다. 해상력이 높은 좁은 형태의 빔 패턴을 얻기 위해서는 평면 형태의 어레이를 고려하는 것이 필요하다. 어레이를 구성하는 개별 음향 트랜스듀서의 송신 주파수는 13 kHz를 사용하였다. 비대칭 크기를 갖는 목표물의 효율적인 탐지를 위해 어레이 디자인에서 방위각(azimuth angle)과 고도각(elevation angle)에 따른 해상도를 동시에 고려하기 위해 areal angle 개념을 사용하였다. 그에 따라 목표 해상도를 만족하는 areal angle을 먼저 구하고 이를 역산하여 각각 목표 방위각과 고도각을 계산하여 어레이의 설계를 진행하였다.

실험계획법을 이용한 컵 귀발생의 영향인자 해석 (Analysis on the Effect of Material and Forming Conditions on the Cup Earing by Taguchi Method)

  • 정기조
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 춘계학술대회논문집
    • /
    • pp.30.1-33
    • /
    • 1999
  • Finite element simulation with experimental analysis of Taguchi's orthogonal array was carried out to know the effects of material and forming parameters on the cup earing and skewness. It was revealed that the planar anisotropy was the most influencing factor in the cup ear formation whereas blank holding force and material properties such as strength and thickness deviation at the coil edge had a relatively high effect on the cup skewness.

  • PDF