• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.159-169
• /
• 2017

The Satellite Electro-Optic Payload System needsspecial requirements with the conditions of limited power consumption and the space environment of solar radiation. The acquired image quality should be mainly depend on the GSD (Ground Sampled Distance), SNR (Signal to Noise Ratio), and MTF (Modulation Transfer Function). On the well-manufactured sensor level, the thermal noise is removed on ASP (Analog Signal Processing) using the CDS (Corrective Double Sampling); the noise signal from the image sensor can be reduced from the offset signals based on the pre-pixels and the dark-pixels. The non-uniformity shall be corrected with gain, offset, and correction parameter of the image sensor pixel characteristic on the sensor control system. This paper describes the SNR enhancement method of the satellite EOS payload using the mentioned noise remove processes on the system design and operation, which is verified by tests and simulations.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.90-97
• /
• 2007

For a highly reliable fingerprint recognition system, the precise and accurate feature extraction is indispensable. In this paper, We propose a highly efficient crease extraction method, which can improve the accuracy of feature extraction within the fingerprint image. The proposed method applies the 1-dimensional directional slit for each pixel in fingerprint image. And then it calculates the average grey level and variance to determine whether the current pixel composes the crease, and estimates the direction of crease. Once the direction of every pixel in crease candidate area is estimated, it is decomposed into 8 different images depending on their direction. From the 8 directional images, the crease clusters are estimated by utilizing the property of crease area. The proposed method finally extracts the crease from the crease clusters estimated from directional images. In conclusion, the proposed method highly improved the accuracy of overall feature extraction by accurate and precise extraction of the crease from fingerprint image.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1224-1242
• /
• 2018

Aiming at motion analysis and compensation, it is essential to conduct motion detection with images. However, motion detection and tracking from low-altitude images obtained from an unmanned aerial system may pose many challenges due to degraded image quality caused by platform motion, image instability and illumination fluctuation. This research tackles these challenges by proposing a modified joint transform correlation algorithm which includes two preprocessing strategies. In spatial domain, a modified fuzzy edge detection method is proposed for preprocessing the input images. In frequency domain, to eliminate the disturbance of self-correlation items, the cross-correlation items are extracted from joint power spectrum output plane. The effectiveness and accuracy of the algorithm has been tested and evaluated by both simulation and real datasets in this research. The simulation experiments show that the proposed approach can derive satisfactory peaks of cross-correlation and achieve detection accuracy of displacement vectors with no more than 0.03pixel for image pairs with displacement smaller than 20pixels, when addition of image motion blurring in the range of 0~10pixel and 0.002variance of additive Gaussian noise. Moreover,this paper proposes quantitative analysis approach using tri-image pairs from real datasets and the experimental results show that detection accuracy can be achieved with sub-pixel level even if the sampling frequency can only attain 50 frames per second.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.38-45
• /
• 2010

A new readout circuit involving a pixel-level reset control was studied for 2-D long wavelength infrared focal plane arrays. The integration time of each pixel can be optimized individually and automatically. Hence, the readout circuit has a wide dynamic range and good signal-to-noise ratio characteristics. The readout circuit was fabricated with a $0.35{\mu}m$ 2-poly 4-metal CMOS process for a $128{\times}128$ long wavelength infrared HgCdTe array with a pixel size of $50{\mu}m{\times}50{\mu}m$. The smart reset control with two-step background suppression improves the signal-to-noise ratio to 87dB and the dynamic range to 95.8dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.609-615
• /
• 2020

In the modern society, the use of digital equipment is increasing along with the 4th industrial revolution, and the importance of image and signal processing is increasing. At the same time, research on noise reduction is being actively conducted. In this paper, we propose a switching filter algorithm for random-valued impulse noise cancellation. The proposed algorithm obtains the threshold value by determining the noise level present in the image, and threshold value is compared with the difference between the input pixel value and the reference value, and is used in the weight switching process of the filter. The final output of the filter is estimated by applying a pixel weight and a modified weight median filter according to the switching, and obtains a final output by comparing the estimated value with the input pixel value. To evaluate the performance of the proposed algorithm, we compared it with the existing methods using simulation and PSNR.

• Korean Journal of Remote Sensing
• /
• v.40 no.2
• /
• pp.179-190
• /
• 2024

This study aims to compare supervised classification methods with phenology-based approaches, specifically pixel-based and segment-based methods, for accurate crop mapping in agricultural landscapes. We utilized Sentinel-2A imagery, which provides multispectral data for accurate crop mapping. 31 normalized difference vegetation index (NDVI) images were calculated from the Sentinel-2A data. Next, we employed phenology-based approaches to extract valuable information from the NDVI time series. A set of 10 phenology metrics was extracted from the NDVI data. For the supervised classification, we employed the maximum likelihood (MaxLike) algorithm. For the phenology-based approaches, we implemented both pixel-based and segment-based methods. The results indicate that phenology-based approaches outperformed the MaxLike algorithm in regions with frequent rainfall and cloudy conditions. The segment-based phenology approach demonstrated the highest kappa coefficient of 0.85, indicating a high level of agreement with the ground truth data. The pixel-based phenology approach also achieved a commendable kappa coefficient of 0.81, indicating its effectiveness in accurately classifying the crop types. On the other hand, the supervised classification method (MaxLike) yielded a lower kappa coefficient of 0.74. Our study suggests that segment-based phenology mapping is a suitable approach for regions like South Korea, where continuous cloud-free satellite images are scarce. However, establishing precise classification thresholds remains challenging due to the lack of adequately sampled NDVI data. Despite this limitation, the phenology-based approach demonstrates its potential in crop classification, particularly in regions with varying weather patterns.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.270-274
• /
• 2008

This paper proposes an advanced signal processing circuit for a fingerprint sensor based on ridge resistivity. A novel fingerprint integrated sensor using ridge resistivity variation resulting from ridges and valleys on the fingertip is presented. The pixel level simple detection circuit converts from a small and variable sensing current to binary voltage out effectively. The sensor circuit blocks were designed and simulated in a standard CMOS 0.35 ${\mu}m$ process.

• International Journal of Internet, Broadcasting and Communication
• /
• v.6 no.2
• /
• pp.10-12
• /
• 2014

This work is based on the motion estimation to handle the ill-posed nature. The algorithm used in this study that performs the motion estimation for overlapped block is used to calculate with using pixel of neighborhood block with higher correlation and present block by considering the correlation level of neighborhood block. The proposed method shows in a significant improvement in the quality of the mothion field when comparing the conventional methods.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.27-29
• /
• 2006

In this paper, we propose a new method of automatic white balance which is one of the image signal processing techniques. Our method is conceptually based on gray world assumption. However, while previous methods generate linear results as multiplying pixel values by a gain, our method generates non-linear results using the feature of B-Spline curves. The two merits of deriving non-linear results are preventing AWB failure from transforming strong color of high level into wrong color and well preserving original contrast of an input image.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.402-403
• /
• 2009

A variety of power reduction technologies is introduced and the benefits of the technologies are discussed. PenTile$^{(R)}$ DBLC (Dynamic Brightness LED Control) combined with SABC (Sensor-Based Adaptive Brightness Control) enables to achieve the average LED power consumption to one third. The panel power reduction of 25% can be achieved with low power driving technology, ALS (Active Level Shifter). MIP (Memory In Pixel) is expected to be useful in transflective display because the whole display area can be utilized in reflective mode with power consumption of 1mW.