• 한국표면공학회지
• /
• 제41권6호
• /
• pp.292-300
• /
• 2008

Dental implant system is composed of abutment, abutment screw and implant fixture connected with screw. The problems of loosening/tightening and stability of abutment screw depend on surface characteristics, like a surface roughness, coating materials and friction resistance and so on. For this reason, surface treatment of abutment screw has been remained research problem in prosthodontics. The purpose of this study was to investigate the stability of TiN and WC coated dental abutment screw, abutment screw was used, respectively, for experiment. For improving the surface characteristics, TiN and WC film coating was carried out on the abutment screw using EB-PVD and sputtering, respectively. In order to observe the coating surface of abutment screw, surfaces of specimens were characterized, using field emission scanning electron microscope(FE-SEM) and energy dispersive x-ray spectroscopy(EDS). The stability of TiN and WC coated abutment screw was evaluated by potentiodynamic, and cyclic potentiodynamic polarization method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion potential of TiN coated specimen was higher than those of WC coated and non-coated abutment screw. Whereas, corrosion current density of TiN coated screws was lower than those of WC coated and non-coated abutment screw. The stability of screw decreased as following order; TiN coating, WC coating and non-coated screw. The pitting potentials of TiN and WC coated specimens were higher than that of non-coated abutment screw, but repassivation potential of WC coated specimen was lower than those of TiN coated and non-coated abutment screws due to breakdown of coated film. The degree of local ion dissolution on the surface increased in the order of TiN coated, non-coated and WC coated screws.

• 한국자기학회지
• /
• 제8권6호
• /
• pp.362-368
• /
• 1998

반강자성 Cr86Al14계 스핀밸브막의 자기특성과 내열 내식성에 대해 연구하엿다. Cr86Al14스핀밸브막의 자기적성질은 강자성층, 자성층 및 비자성층두께에 의존하였으며, glass/Cr86Al14(600$\AA$)/Ni81Fe19(50$\AA$)/Cu(40$\AA$)/Ni81Fe19(40$\AA$)구조에서의 교환결합자장(Hex)은 20 Oe, 자기저항비(MR ratio (%))는 2%를 나타내었다. Cr96Al14 및 Fe50Mn50 스핀밸브막은 annealing온도가 증가함에 따라 모두 Hex 및 MR비가 감소하는 경향을 나타내엇으나 FeMn막에 비해 CrAl막이 우수하여, FeMn막은 15$0^{\circ}C$, CrAl막은 25$0^{\circ}C$에서 Hex 및 MR비값을 상실하였다. 또한 가혹한 환경에서의 스핀밸브막의 부식저항성을 평가하고자 35$^{\circ}C$,90% 습도상태의 챔버내에서 Hex와 MR비값의 변화를 관찰한 결과 CrAl막의 경우에는 Hex 및 MR비 값이 시간이 경과해는 변화지 않았으나, FeMn막은 15일정도 경과하자 거의 상실하는 결과를 나타냈다. SEM관찰결과 FeMn막은 pitting이 나타났으며 15일정도 경과후에는 박리가 발생하였다.