• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.135-146
• /
• 2016

Three fiber sources including Russian spruce (Picea jezoensis) and larix (Larix leptolepis), and Myanmar bamboo (Phyllostachys bambusoides) for thermomechanical pulp were explored to replace domestic pine (Pinus densiflora) pulp that has some limitations in an aspect of supply and pitch trouble. Thermomechanical pulps were manufactured under the identical condition, and then compared with their representative pulp properties and pulping process. Both Russian larix and Myanmar bamboo contained large amounts of extractives that would negatively affect mechanical pulping processes. Russian spruce showed the least contents in shives and pitch. Russian spruce and domestic pine reached an optimum freeness level within a short pulp processing time, which consumed less amount of refining energy compared to larix and bamboo. In particular, the spruce wood showed the highest brightness level which might lead to a less consumption of bleaching chemicals. It was expected that Russian spruce could be replaced with the domestic pine wood in respect of both pulping process and pulp quality.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.72-76
• /
• 1991

The new preparative separation techneque of dihydroquercetin (2, 3-trans-dihdroxy-3, 3', 4', 5, 7-pentahydroxydihydroflavonol) was investigated by liquid chromatography. Also some typical coniferous wood bark were examined for the sources of dihydroquercetin. The good sources of dihydroquercetin were Douglas-fir[Pseudotsuga menziesii] bark and pitch pine [Pinus rigida] bark. There is no dependance the produced place and species dihyroquercetin which is separated by silica-gel column chromatography was taken with white needle-like crystals. This crystals were very stable in the humidity and on the light. It also can stored very long without derivatives.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.599-604
• /
• 2015

This study was conducted the vegetation clustering analysis for the 3 mountains of Mt. Bulam, Mt. Daemo, Mt. Bonghwa which were the urban forests of Seoul. Based on the results of the analysis related to the vegetation clustering, it was found that the clustering of Mt. Bulam consisted of pine trees(Pinus densiflora)-Mongolian oak(Quercus mongolica), Hornb eam(Carpinus laxiflora)-Pitch pine(P. rigida), oriental oak(Q. variabilis) - a wild pear tree(Sorbus alnifolia) while the clustering of Mt. Daemo consisted of Pitch pine-Japanese larch(Larix leptolepis), Poplar(Populus tomentig landulosa)- black birch(Betula davurica pall). Meanwhile, the clustering of Mt. Bonghwa consisted of pine trees-a wild pear tree Community and Sawtooth oak(Q. acutissima)-Cherry Blossoms(Prunus serrulata). In relation to the similarity index by region in Mt. Bulam, Mt. Daemo, and Mt. Bonghwa, the similarity index of Mt. Bulam and Mt. Daemo stood at as high as 0.634, suggesting the distribution of similar vegetation, and the dominance index of the Mt. Daemo region was found to be 0.166 which suggests the dominance of many species compared to other regions. In addition, the results of species diversity showed that Mt. Daemo had the highest stability, and the species diversity, maximum species diversity, evenness indices were highest in Mt. Bulam, followed by Mt. Bonghwa and Mt. Daemo. The dominance index was the lowest in Mt. Bulam, followed by Mt. Bonghwa and Mt. Daemo.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.381-395
• /
• 1989

The main purpose of this research is to provide scientific informations about standard wage and performance tariffs in forest management with special reference to working time for thinning. To identify relationships between net working time and tree characteristics, three geographically different sample plots were established at Yangsan, Bongpyung and Jinan and 460 oaks, 372 Japanese larches, 232 red pine and 240 pitch pine mere selected at each sample plots. The results of statistical analysis using multiple regression are as follows ; 1. Five independent variables of breast height diameter(DBH), mid-diameter(MD) large end diameter(LD), log-length(L), No. of branches(NOB) were stable independent of worker and tree species. 2. Comparing correlation coefficient of five independent variables, the best predictive variables, breast height diameter and No. of branches, were selected. Breast height diameter and No. of branches were identified as the most important independent variables in terms of effect on the dependent variable of the working time. 3. Comparing coefficient of determination (Rp) and residual mean square (MSEp), the best Linear regression equation for each tree species was selected as follower : $WT=a+b1{\times}NOB+b2{\times}DBF$ 4. Proportion of hang-up time to total working time in thinning were 66% in oak stand, 74%, in Japanese larch stand, 55%, in red pine stand and 52% in pitch pine stand, respectively. 5. Based on the best regression equation, a table of working time was made by strata of number of branches and breast height diameter. 6. Total working time using the best regression equation in Table 5 can be predicted in terms of felling time, limbing time, hang-up time, i.e., total working time increases by 11 to 13 seconds with every 1 centimeter increase in breast height diameter from 7 to 16 centimeter.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.87-94
• /
• 2002

This study was carried out to evaluate bending property on principal domestic species such as sargent cherry(Prunus sargentii), bitter wood(Picrasma quassioides), horn beam(Carpinus laxiflora), cork oak(Quercus variabilis), birch(Betula schmidtii), painted maple(Acer mono), basswood(Tilia amurensis), red pine(Pinus densiflora), pitch pine(Pinus rigtda), royal pawlonia(Paulownia tomentosa) by microwave heating. In this study, radius of curvature(ROC) for bending process was classified by radius of curvature(ROC) of bending plate such as 4 cm, 6 cm, and 10 cm, and thickness of metal-strap(TMS) was 0.6 mm and 0.8 mm. Bending process was successfully operated for 100 percent in bitter wood, horn beam, birch and painted maple. On the other hand, there was a success rate of 58 percent in sargent cherry and 83 percent in cork oak and 29 percent in basswood and 8 percent in royal pawlonia which is the worst bending property. All specimens of basswood and royal pawlonia were broken at 4 cm of ROC. Success rate of bending property was shown 44 percent in red pine and 56 percent in pitch pine. TMS has an effect on only drying speed in drying process than difficulty and facility of bending property. It was considered that the thinner TMS in drying process is the faster in drying speed of bent wood.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.2
• /
• pp.56-64
• /
• 1991

The destructed chips(Pinus rigida Mill) were sulfonated under different conditions and defiberated. The yields and strengths of pulp, fatty acid and resin acid in sulfonated chips were determined. The results of this work were as follows: 1) A sulfonation caused a yield reduction to 97.9~88.2% at single stage. and to 94.9~88.2% at two stage pretreatment. The pulp yields were rapidly draped with increasing cooking temperature from $130^{\circ}C$ to $150^{\circ}C$ 2) Pulp strengths were improved with iacreasing cooking temperature. A sulfonation with 5% $Na_2SO_3$/NaOH(8/2) at single stage and 2% NaOH-5% $Na_2SO_3$ at two stage were most effective and gave the best combination of strength properteis. 3) Fatty acid esters in chips were mostly consisted of palmitic and olleic acid. During a sulfonation the former increased extensively, and the latter was lost with increase of cooking times. The amount of pimaric type in the chips was relatively decreased by the pretreatnent and abietic-type increased. But the changes between two resin acid types were insignificant. 4) The effciency of pitch removal was dependant upon cooking liquor pH. To remove sufficiently the resinous substance, the chips must be sulfonated at over pH 12. Therefore, taking account of pitch removel, two stage sulfonation is considered suitable as reinforcement pulp for newsprint manufacture from pitch pine chips : 2% NaOH($60^{\circ}C$ 1 hr) at first stage and 5% $Na_2SO_3$ ($130^{\circ}C$, 1hr) at secund stage.

• Journal of Korean Society of Forest Science
• /
• v.41 no.1
• /
• pp.19-25
• /
• 1979

The study was carried out to determine the frequency distribution of trees by diameter classes according to the method of Bruce and Reineke's alignment with the data of pitch pine (Pinus rigida Miller) and Italian poplar (Populus euramericana Guinier) which are prepared for the purpose of yield table construction. The results obtained are summarized as follows: 1. All through the tree species studied, when their diameters were larger, their distribution range became wider, while the percentage of their distribution frequency became lesser. 2. As for frequency percentage of trees in an average D.B.H. of stands, it became smaller when average D.B.H. of the stand is larger: the percentage of pitch pine stand is 36.2 and that of Italian poplaris 29.0. 3. In case of smaller D.B.H. under the average, the larger their D.B.H. became, the lesser the cumulative frequency percentages became.

• The Korean Journal of Ecology
• /
• v.17 no.4
• /
• pp.501-511
• /
• 1994

Dynamics of nutrients, non-polar, water solubles, acid solubles and acid insolubles (lignin) in decomposing litter were investigated for 2 years in the oak, Quercus acutissima, and the pitch pine, Pinus rigida, stands in the vicinity of Kongju, Chungnam Province. Nitrogen and phosphorus conetrations in decomposing litter increased with time elapsed, however, potassium decreased rapidly within three months and then remined constant with time elapsed. Calcium concentration in needle litter during experimental period was lower than that of initial concentration in needle litter during experimental period was lower than that of initial concentration, and showed no significant variation with time elapsed. Calcium concentration in oak litter during the experimental period, however, were higher than that of initial concentration. Magnesium concentration in oak litter decreased repidly during six months, and then remaines constant thereafter. Annual amount of nitrogen, phosphorus, potassium, calcium and magnesium which returned to soil via litter decomposition in the oak and the pitch pine stands was $3.3g/m^2$ and $0.9g/m^2$ for N, $0.03g/m^2$ and $0.01g/m^2$ for P, $1.3g/m^2$ and $0.7g/m^2$ for K, $0.7g/m^2$ and $1.2g/m^2$ for Ca, $0.9g/m^2$ and $0.4g/m^2$ for Mg, respectively. Non-polar, and water- and acid-soluble fractions in decomposing litter decreased and lignin increased with time.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.521-530
• /
• 2011

Nowadays, market demand of structural Glulam is growing and diversifying. The durability of Glulam should be significantly considered when they are intended to apply for out-door use such as timber bridge and pergola. This study was aimed to develop the manufacturing process of preservative treated structural Glulam using domestic softwood species. 10 m long structural Glulam were manufactured from domestic pitch pine logs with CuAz-3 preservative treatment. At each manufacturing process, the production yield was evaluated. Finally, bending tests were performed to verify the structural performance of manufactured Glulam. From the results, it was shown that the preservative treatment process hardly influenced on the production yield. But domestic pitch pine was proved to not be suitable for making the preservative treated Glulam due to the large difference of preservative permeability between sapwood and heartwood.