• 제목/요약/키워드: Piston geometry

검색결과 52건 처리시간 0.017초

양로드형과 편로드형 EHA의 힘 제어 특성 비교(I): 추종 성능 (Comparison of Force Control Characteristics Between Double-Rod and Single-Rod Type Electro-Hydrostatic Actuators (I): Tracking Performance)

  • 김종혁;홍예선
    • 드라이브 ㆍ 컨트롤
    • /
    • 제14권4호
    • /
    • pp.9-16
    • /
    • 2017
  • In this study, the force tracking performance of the single-rod and double-rod type EHAs (Electro-Hydrostatic Actuators) was compared by computer simulation and experiments. The force-controlled EHAs exhibit non-linear behavior that are significantly dependent on operation conditions. The investigation focused on localizing the parameters that provide significant rise to the non-linearity. For this, the single-rod and double-rod type EHAs were mathematically expressed to derive their linear models. In parallel, they were modeled by a commercial simulation program including non-linear properties based on experimental results. It was shown that the dependency of the bulk modulus of oil with entrapped air on working pressure dominated the non-linearity in force control performance in case of the double-rod type EHA. The force control of the single-rod type EHA was influenced by much more elements. Besides the asymmetrical piston geometry and the non-linear bulk modulus of oil, its pilot-operated check valves made it dependent not only on the magnitude of reference input but also on its direction.

항공우주 비행체 정적구조시험용 하중제한밸브 부품 형상 분석 (Geometrical Analysis on Parts of Load Limit Valve for Static Structural Test of Aerospace Flight Vehicles)

  • 심재열
    • 한국항공우주학회지
    • /
    • 제47권9호
    • /
    • pp.607-616
    • /
    • 2019
  • 항공우주비행체 정적구조시험을 위한 과하중 방지를 위해 사용되는 하중제한밸브(LLV)의 파일럿 스테이지의 주요 구성품들에 대한 자유물체도 분석을 수행하였다. 이 분석을 통하여 유압작동기의 동일한 힘에서 일관성있게 포펫 개방되도록 하기 위해서는 파일럿스테이지에 있는 두 포펫의 직경비($(D_2)^{ten}/D_2)^{comp}$)가 작동기의 피스톤 면적비($A_{comp}/A_{ten}$)와 동일해야만 한다는 것을 보였다. 실험실에서 외산으로 수입하여 사용하고 있는 4개의 서로 다른 하중제한밸브의 포펫들 형상을 측정하고 대응되는 4개의 다른 용량을 갖는 유압작동기들의 피스톤 면적비들로부터 위의 분석결과가 타당함을 확인하였다. 두 개의 다른 파일럿스테이지로 수행한 "조절자 분해능시험들"의 결과들로부터 조절자 각 회전에서 얻은 Fi(포펫개방 순간의 작동기 힘)의 최대 표준편차는 각 평균값으로부터 0.3KN이고 표준편차를 각 평균값으로 나눈 무차원값으로 분석하면 최대편차는 3.7%이다. 이 결과로 부터 동일 포펫 직경비를 갖는 두 개의 파일럿스테이지들의 포펫은 각 조절자 회전에 대해 Fi/(평균 Fi) 값이 +/- 3.7% 범위에서 일관성 있게 개방되고 있음을 확인하였다. 위의 편차는 포펫 O-링의 마찰력으로부터 유발되는 것임을 보였다. 부가적으로 파일럿스테이지의 다른 주요부품인 포펫 스프링과 조절자의 주요설계인자들도 식별하였고 이들의 결정과정도 본 연구에서 보였다.