• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 1999년도 추계학술대회 발표요약문
• /
• pp.21-25
• /
• 1999

Planning support systems(PSS) add more advanced spatial analysis functions than Geographic information systems(GIS) and intertemporal functions to the functions of spatial decision support systems(SDSS). This paper reports the continuing development of a PSS providing a framework that facilitates urban planners and civil engineers in conducting coherent deliberations about planning, design and operation & maintenance(O&M) of water-distribution networks for urban growth management. The PSS using dynamic optimization model, modeling-to-generate-alternatives, value engineering(VE) and life-cycle cost(LCC) can generate network alternatives in consideration of initial cost and O&H cost. Users can define alternatives by the direct manipulation of networks or by the manipulation of parameters in the models. The water-distribution network analysis model evaluates the performance of the user-defined alternatives. The PSS can be extended to include the functions of generating sewer network alternatives, combining water-distribution and sewer networks, eventually the function of planning, design and O&H of housing sites. Capacity expansion by the dynamic water-distribution network optimization model using MINLP includes three advantages over capacity expansion using optimal control theory(Kim and Hopkins 1996): 1) finds expansion alternatives including future capacity expansion times, sizes, locations, and pipe types of a water-distribution network provided, 2) has the capabilities to do the capacity expansion of each link spatially and intertemporally, and 3) requires less interaction between models. The modeling using MINLP is limited in addressing the relationship between cost, price, and demand, which the optimal control approach can consider. Strictly speaking, the construction and O&M costs of water-distribution networks influence the price charged for the served water, which in turn influence the. This limitation can be justified in rather small area because price per unit water in the area must be same as that of neighboring area, i.e., the price is determined administratively. Planners and engineers can put emphasis on capacity expansion without consideration of the relationship between cost, price, and demand.

• 대한설비공학회지:설비저널
• /
• 제6권4호
• /
• pp.262-266
• /
• 1977

A new computer system for the stress analysis and design of piping network has been devlo-ped in this study. For the stress analysis, the system utilizes the finite element technique in which the frontal technique is used as the equation solver. The element library of the system has (1) Pipe Element (2) Beam Element, (3) Hanger Element and (4) Spring Element which should be sufficient to model the entire piping system including flexible supports, joints, piping rack and hangers. Based on the element stresses, code check has been performed and the safety factor for each element is calculated.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.183-193
• /
• 2010

Well planned rehabilitation order of pipes is essential for efficient maintenance and management of Water Distribution Systems. In this study, not only deterioration rate of pipes but also structural and nonstructural failure which causes abnormal condition of WDS is considered to determine rehabilitation order. Probabilistic Neural Network is used for calculating deterioration rate at present and the importance of pipes is computed under structural and nonstructural failure by using Pipe by Pipe Failure Analysis and Effect Index. Utopian Approach, one of the Multi-Criteria Decision Making methods, is used for assessment of final rehabilitation order based on distance measure between utopian point and alternative one. Developed model in this study shows that it gives more reliable results than existing methods considering hydraulic relative importance does in application to real networks. In this point, the newly developed model, which gives advantages over existing models, can make a credible decision and simple application.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.137-142
• /
• 2022

Leak detection is one of the most important challenges in condition monitoring of water pipelines. Fiber Bragg grating (FBG) sensors offer an attractive technique to detect leak signals. In this paper, leak measurements were conducted on a water distribution pilot plant with a length of 270 m and a diameter of 100 mm. FBG sensors were installed on the pipeline surface and used to detect leak vibration signals. The leak was demonstrated with 1-, 2-, 3-, and 4-mm diameter leak holes in four different pipe types. The frequency response of leak signals was analyzed by fast Fourier transform analysis in real time. In the experiment, the frequency range of leak signals was approximately 340-440 Hz. The frequency shifts of leak signals according to the pipe type and the size of the leak hole were demonstrated at a pressure of 1.8 bar and a flow rate of 25.51 m³/h. Results show that frequency shifts detected by FBG sensors can be used to detect leaks in pipelines.

• 한국공간정보시스템학회 논문지
• /
• 제2권2호
• /
• pp.75-84
• /
• 2000

국가지리정보체계사업을 시작으로 여러 응용분야에서 지리정보시스템을 구축하고 있으며 특히 지자체에서는 도시정보화 차원에서 UIS(Urban Information System;도시정보시스템)를 구축하고 있다. 지자제의 업무들은 지자체의 상황에 따라 조금씩 차이를 보이지만 업무 단위로 따져볼 때 공통적으로 수행되는 업무들이 많으며, 지리정보 관련 업무 또한 예외가 아니다. 지금까지 각 지자체의 도시정보시스템은 공통업무에 대하여 중복개발이 불가피하였으며, 재사용성을 기대하기 어려웠다. 이런 비효율성을 극복하는 방안으로 컴포넌트 기술이 대두되었으며, 컴포넌트 기술을 이용하여 업무변화에 유연하고 재활용을 극대화할 수 있는 업무컴포넌트 개발이 필요하게 되었다. 본 논문은 지자체의 지리정보 관련 업무의 하나인 상수도 업무 중 상수관거의 유량 및 손실수두산정을 위한 상수도 관망해석 컴포넌트 설계를 제시하였다. 상수도 관망해석 컴포넌트는 상수도 초기유량을 산정하고, 산정된 초기유량을 토대로 절점 및 상수관거의 유량 및 손실수두를 산출하여, 상수관거 신설 및 확장에 대한 의사결정을 지원할 수 있도록 설계하였다. 컴포넌트 설계과정은 표준업무를 지원할 수 있도록 업무분석을 수행하였으며, 이의 결과물로 상수도 관망해석 알고리즘을 도출하였다. 그리고 도출된 알고리즘을 기반으로 상수도 관망해석 업무를 수행하는 상수도 관망해석 컴포넌트를 설계하고 설계 내용을 UML(Unified Modeling Language)로써 명세화하였다. 현재 설계에 따라 상수도 관망해석 컴포넌트가 개발되고 있으며, 개발된 컴포넌트를 이용한 상수도 관망해석 시스템을 구축할 예정이다. 추후에는 상수도 관망해석 컴포넌트와 상수도 업무 컴포넌트와의 통합부분에 대한 연구가 진행되어야 할 것이다.

• 상하수도학회지
• /
• 제26권5호
• /
• pp.609-617
• /
• 2012

A dynamic water quality model is presented in order to simulate water quality under slowly varying flow conditions over time. To improve numerical accuracy, the proposed model uses a lumped system approach instead of extended period simulation, unlike the other available models. This approach can achieve computational efficiency by assuming liquid and pipe walls to be rigid, unlike the method of characteristics, which has been successfully implemented in rapidly varying flows. The discrete volume method is applied to resolve the advection and reaction terms of the transport equation for water quality constituents in pipes. Numerical applications are implemented to the pipe network examples under steady and unsteady conditions as well as hydraulic and water quality simulations. The numerical results are compared with EPANET2, which is a widely used simulation model for a water distribution system. The model results are in good agreement with EPANET2 for steady-state simulation. However, the hydraulic simulation results under unsteady flows differ from those of EPANET2, which causes a deviation in water quality prediction. The proposed model is expected to be a component of an integrated operation model for a water distribution system if it is combined with a computational model for rapidly varying flows to estimate leakage, pipe roughness, and intensive water quality.

• 한국콘텐츠학회논문지
• /
• 제16권4호
• /
• pp.614-623
• /
• 2016

스마트워터그리드의 중요한 요소기술로써 그리드(관망)의 설계는 압력, 마찰계수, 마찰속도, 수두손실, 그리고 에너지 경사와 같은 수리학적 매개변수를 추정하는 것이 필수적이다. 특히, 그리드의 마찰속도는 에너지 경사, 마찰계수, 압력, 수두손실 등의 결합에 있어 매우 중요한 인자이다. 그러나 마찰 수두손실, 마찰속도 등 마찰인자를 정확히 산정하는 것은 매우 어려우며, 경험적 마찰 인자는 여전히 약 100년 전에 개발된 공식과 이론을 사용함으로써 산정된다. 따라서, 본 논문에서는 최대유속과 마찰속도 사이의 새로운 공식을 Darcy-Weisbach의 마찰수두 손실공식과 Schlichting 공식 사이의 적분관계 및 회귀분석을 통하여 개발하였다. 개발된 공식을 증명하기 위하여 매끄러운 관 자료가 사용되었으며 제안한 공식은 관측 자료와 비교하여 높은 정확성을 보여준다. 이 연구의 결과는 안정성 향상과 그리드 설계에 사용이 가능할 것으로 판단된다.

• 물과 미래
• /
• 제29권3호
• /
• pp.197-205
• /
• 1996

상수도 관망시설에서 각 관로는 시간이 경과함에 따라 각종 부식이 일어나 통수능이 저하된다. 그러므로 적절한 시기에 갱생이나 교체 등의 처리를 해주어야 한다. 본는 연구에서는 각 수요절점에서 요구수량, 요구압력 등 수리학적 조건을 만족시켜주며 동시에 최소의 비용으로 노구된 관로를 처리해주는 의사결정모형을 개발하였다. 교체비용, 관파열보수비용, 양수비용, 관 파열율, 연이율 등은 각 관로의 교체시기를 경제적으로 결정하는데 이용된다. 그리고 배수시설의 수리학적 만족여부는 관망계산 프로그램 KYPIPE에 의해 점검된다. 시스템이 수리학적 조건을 만족지 못할 경우 교체시기는 조건이 만족될 때까지 앞당겨진다. 본 모형은 기존 송배수시설인 수도권 광역상수도 제1단계에 적용되었다. 모형을 이용해 산출한 최적교체시키는 수리학적으로 모의해본 결과 문제가 없으며를 알 수 있었다.

• 한국가스학회지
• /
• 제5권2호
• /
• pp.43-51
• /
• 2001

본 연구에서는 상용프로그램(STONER) 상에 천연가스 전국 배관망 모델이 수립되었다. 이를 위해 STONER 상에 전국 배관망도가 작성되었으며, 배관망도 상에 기존 자료를 토대로 전국 각 배관의 배관 관경, 연장 길이가 입력되었다. 그리고 배관내를 흐르는 가스를 정의하기 위해 천연가스의 비중값이 입력되었다. 마지막으로 배관의 성질과 가스 온도를 결정하기 위해 실측치와의 비교 검증을 통하여 오류를 최소화하였다. 이에 먼저 주 배관성질 값이 가정되었고, 이에 대해 실측 수요 자료를 가지고 배관망 분석이 수행되었다. 그리고 분석 결과 계산된 공급압력과 실측된 공급 압력을 분산 비교하여 최종적으로 배관의 성질값을 결정하였다. 이렇게 배관의 성질 결정에 있어서 기존의 배관망 모델 수립 방법과는 다르게 실측자료와의 검증 방법을 사용하여 좀더 실제에 접근한 모델을 수립할 수 있었다.