• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.12-20
• /
• 2006

The objectives of this study were to identify the species of coffin woods excavated at Ma-jeon relic in Jeonju and to date this coffin using tree-ring method. Al coffin woods were identified as red pines, most possibly, Pinus densiflora S. et Z. Tree-ring dating provides a calender year to each ring and produces the cutting date, if the bark presents. Due to the presence of bark and complete latewood present, the cutting date of the tree for coffin turned out between A.D. 1637 autumn and 1638 spring. However, due to the seasoning and storage periods, actual coffin manufacturing and burial time may be a little different from the tree-ring date.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2011

Six pine trees (Pinus densiflora S. et Z.) at the Euilimji Lake Park in Jecheon were collected to investigate tree ages, growth decline pattern and the years of death. Tree-ring measurement was carried out using the Lintab with a resolution of 0.01mm. Tree age were 80-176 years. Cross-dating between the tree-ring series of each tree and the local chronology from Worak Mountain resulted that four and two trees died in 1998 and 1999, respectively. Three dead trees had only formed earlywood in the outermost tree ring and the others had incomplete latewood. Therefore, it was proven that the former trees died between spring and early summer, whereas the later ones died during late summer and/or autumn. The simultaneous deaths of trees suggest the insect damage and/or drought may be the crucial reason of the death, but frequent reaction woods, which were formed by leaning stem, and scars formed by physical damage may also contribute to the death.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.1-7
• /
• 2004

The change in surface temperature of woodceramics, made from thinned logs of Pinus densiflora, were investigated, by the impregnation ratio and carbonizing temperature. As the surface temperature of silicon rubber heater was going up, that of woodceramics also increase rapidly. In case of heaters surface temperature at 70℃, the surface temperature of woodceramics was 53.9℃ when a sample was the impregnation ratio of 80%, while it was 54.2℃ when a sample was at 1,000℃ in carbonizing temperature, showing the highest. Also, it was found that woodceramics maintained heat for a long time because the descending velocity of their surface temperature was lower than that of the heater.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.559-575
• /
• 2012

This study, targeting Namhan Mountain Fortress which was designated as a No. 57 national historic site and placed on the World Heritage Tentative List in 2010, was intended to identify the change of vegetation structures by reviewing past references, pictures, research data and additionally conducting a site survey. Also, it was designed to draw up measures for restoring vegetation suitable for historically and culturally valuable Namhan Mountain Fortress. According to the biotope mapping of study site, Quercus spp. forest distributed a greatest part of area with 40.8% of $2,611,823m^2$. Pinus densiflora forest, highly likely to go through ecological succession, was dispersed in the whole region of Cheongryangsan, the area from West Gate to North Gate and the ranges between South Gate to Cheongryangsan with taking 16.5%. Pinus densiflora forest with a low probability of succession amounted to 4.7% and was dispersed mainly in the forest behind Namhansan elementary school. Pinus densiflora going on the ecological succession is distributed a portion of 2.9%. And the currently dying out Pinus densiflora forest amounted to 2.1%. As a result of analysis of the vegetation structure for 19 years, the succession from Pinus densiflora forest to Pinus densiflora and succession from Quercus spp. mixed forest to Quercus spp. forest to Carpinus laxiflora forest were predicted. Additionally, Quercus spp. expanded its dominance over time. According to the characteristics of each classified zone, the site was categorized into $553,508m^2$ area of Pinus densiflora forest area for the landscape maintenance, $114,293m^2$ area of Pinus densiflora forest area for the landscape restoration, $205,306m^2$ area of Pinus densiflora forest area for the disclimax, and $1,169,973m^2$ area of Pinus densiflora forest area for inducing ecological succession.

• Journal of Korean Society of Forest Science
• /
• v.89 no.4
• /
• pp.536-542
• /
• 2000

A linkage map for Japanese red pine (Pinus densiflora) was constructed on the basis of two DNA marker systems of random amplified polymorphic DNAs (RAPDs) and inter-simple sequence repeats (I-SSR). Haploid genomic DNAs were extracted from megagametophyte tissues of 96 individual seeds in a single tree. A total of 98 DNA markers including 52 RAPD markers amplified by 25 primers and 46 I-SSR markers amplified by 18 primers were verified as Mendelian loci showing 1 : 1 segregation in 96 megagametophytes which were ${\chi}^2$-tested at 5% significance level. Of them, 63 segregating loci turned out to be linked into 20 linkage groups by the two-point analysis. However, 35 loci (17 RAPD and 18 I-SSR) of the 98 segregating loci did not coalesced into any linkage groups at a LOD of 3.0. The linked 63 loci were separated by an average distance of about 25.5 cM, which were spanned 1097.8 cM as a whole. The minimum and maximum map distances of the linkage groups were 4.3 cM and 54.9 cM, respectively. Incorporation of I-SSR loi into linkage map of RAPD loci resulted in extended and partially more saturated linkage blocks.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.44-51
• /
• 2008

In this study, the effects of carbonization temperature on the physico-chemical properties of Korean red-pine wood (Pinus densiflora S. et Z.) powder charcoal are studied by elemental analysis, nitrogen adsorption-desorption and SEM techniques. The surface structure and physico-chemical properties of the wood charcoal greatly depend on the carbonization temperature and their temperature dependences for sapwood (swd) and heartwood (hwd) are qualitatively analogous. Because of the differences in characteristics such as hardness and composition between heartwood and sapwood, charcoals from heartwood have larger specific surface area and smaller average pore diameter than that from sapwood. Because the decomposition reaction mostly proceeds in the precarbonization stage, the charcoal produced in this stage mainly consists of carbon. The second carbonization reaction is insignificant but still proceeds up to $700^{\circ}C$, and the specific surface area continuously increases. Above $800^{\circ}C$, the surface area is reduced by the pore-filling and narrowing effects and especially above $900^{\circ}C$, new carbon phase with hexagonal column rooted into the pore is formed. The nitrogen adsorption-desorption isotherm of the charcoal is classified as type I and its hysteresis loop was as type H4.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.9-13
• /
• 1985

Protoplasts were isolated from cotyledons of germinating Pinus densiflora S. et Z. seeds. The seeds were germinated for nine days, and excised embryonic cotyledons about 3-4mm long were incubated with Cellulase Onozuka R-10 and Macerozyme. After 8 hours of incubation, large number of viable protoplasts were isolated. Isolated protoplasts were cultured in a medium containing basal salts of $B_5$ medium, vitamines, amino acids, organic acid, sugars, and growth hormones. The first evidence of protoplast budding was observed after twelve hours in culture, and it suggested that high potential of the embryonic cotyledons for rapid cell division affected the early budding, rather than effect of culture medium was shown in twelve hours. The three- to four-cell stage was reached after three to four days of culture. Most cell divisions were achieved by additional buddings rather than equal binary cell division. No further cell division was observed beyond the four-cell stage. Protoplasts isolated from fully expanded cotyledons (germinated for 17 to 24 days) seldom initiated or failed to initiate cell division.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.74-81
• /
• 1985

Dimension analysis was used to estimate biomass and net primary production(NPP) in a 36-year-old Japanese red pine (Pines densiflora S. et Z.) natural forest in Kangwondo. Best estimation was made by the equation model of $Wt=aD^bH^c$ where Wt is weight in kg, D is DBH in cm, and H is total tree height in m. Total aboveground biomass was estimated at 198.82 t/ha. Organic matter was distributed in the Japanese red pine stand as follows ; bolewood 68.8%, live branches 16.5%, bolebark 5.4%, foliage 4.6%, dead branches 3.7%, and cones 0.6%. Net primary production was estimated at 15.87 t/㏊/yr and was distributed: bolewood 44.5%, live branches 30.9%, foliage 14.1%, current twig 7.1%, and bolebark 3.3%. Leaf efficiency was estimated at 1.876. The power equation for biomass and IVPP yielded similar results as the results for Pines densiflora in Japan.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.100-108
• /
• 2001

An understanding of potential lumber cutting yields may lead to increased utilization of the lower grades of lumber in wood industry. Computer simulations of rough-mill operations require a lumber database as input to give reasonable estimates of such yields. The lumber database must contain detailed information regarding the location and type of defects, and then all manufacturing sequences can be tested with the same raw material. However, no suitable lumber database with mapped defects exists for Korean wood industry. In this study lumber databases of Pinus densiflora S. et Z and Quercus acutissima which are the main Korean domestic species were developed to prepare for coming era of "utilization of domestic species" in the near future. These databases were put into lumber cut-up simulation model(gang-rip-first simulator) to investigate the part yields. Gang-rip first simulation showed average part yields of 44.75% and 63.10% for Quercus acutissima and Pinus densiflora lumber database developed, respectively. In most cases process set-up of fixed blade best feed showed the best part yields and the level of acceptable defects could not make significant differences in part yields.

• Journal of Ecology and Environment
• /
• v.39 no.1
• /
• pp.51-60
• /
• 2016

This study was conducted to examine litter fall, litter decomposition, and a short-term nutrient (C, N, P, K, Ca, and Mg) status for one year at various levels of basal area (21.4, 27.0, 30.8, 37.0, 42.1, and 46.7 m² ha^-1) in approximately 40-yearold red pine (Pinus densiflora S. et Z.) stands in the Hwangmaesan mountain forest in Korea. Monthly fluxes of litter fall components such as needles, broad leaves, branches, bark and total litter fall followed a similar pattern at various levels of basal area. Mean annual needle, bark and total litter fall fluxes were positively correlated with increased basal area (p<0.05), but the woody litter such as branches and cones was not correlated with basal area. Carbon and K concentrations of needle litter were negatively correlated with increased basal area, while nutrient (C, N, P, K, Ca, and Mg) fluxes were positively correlated with the basal area treatments. Remaining mass, N and P concentration and remaining N and P stocks in decomposing needle litter were not affected by the basal area. However, the concentration and stocks remaining of K, Ca, and Mg from decomposing litter were positively correlated with increased basal area during the initial three months of decomposition. The results indicate that basal area has an impact on nutrient cycles through change in litter fall and litter decomposition processes; thus, the dynamics of nutrient cycles based on a stand scale could differ considerably with different levels of basal area in red pine stands.