• Journal of Welding and Joining
• /
• v.26 no.4
• /
• pp.61-65
• /
• 2008

The static force balance model (SFBM) has been used to analyze drop transfer in gas metal arc welding. Although the SFBM is capable of predicting the detaching drop size in the globular mode with reasonable accuracy, discrepancy between the calculated and experimental results increases with current. In order to reduce discrepancy, the SFBM is modified by considering the momentum of the molten metal flow, which is generated by the pinch pressure. The momentum increases with smaller drop size and becomes compatible to the electromagnetic force. The modified force balance model (MFBM) predicts the experimental results more accurately, and extends its application to the projected mode.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.5
• /
• pp.670-678
• /
• 1999

Heat recovery steam generator(HRSG) is a principal component of the combined cycle power plant (CCPP) which utilizes the waste energy of the gas turbine exhaust gas. A design of the HRSG is a keypoint to achieve high cycle efficiency with competitive cost. This paper presents a brief review on the design of a HRSG which covers the basic design parameters and their effects on the performance and the investment cost. Finally the concept of the optimum design point is presented according to the selection of a pinch point temperature difference and a steam pressure as an illustrated case.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.9
• /
• pp.375-379
• /
• 1986

The HCP(Hypocycloidal Pinch) device for plasma focus was modified for a pumping source of the dye laser, and the spectral distribution and time behavior of its light pulses were investigated by using a UV spectrometer, 70 MHz CRO and Si-PIN photodiode detector. An array of multiple stages of HCP and narrower electrode gaps were chosen in order to make a more uniform discharge along the HCP axis. The possible spectral range for the pumping of dye laser is 360-620nm, when the HCP is operated at 5-8kv of apllied voltage and 50-150Torr of Ar fill gas pressure. The rise-time and FWHM of light pulses from the HCP are 5us and 30-50us respectively when it is operated under the same conditions as above.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.19-24
• /
• 2016

Oil sands are a mixture of sand, clay, and a high-viscosity petroleum called bitumen. Steam-Assisted Gravity Drainage (SAGD) is the most viable and environmentally safe recovery technology for extracting bitumen. It extracts the viscosity-lowered bitumen by high pressure, high temperature steam injected into the bitumen reservoir. The steam is produced at the Central Processing Facility (CPF). Typically, more than 90% of the energy consumed in producing bitumen are used to generate the steam. Fuels are employed in the process, which cause economic and environmental problems. This paper explores the retrofit of heat exchanger network to reduce the usage of hot and cold utilities. The hot and cold utilities are reduced respectively 6% and 37.3% which in turn resulted in 5.3% saving of total annual cost by improving the existing heat exchanger network of the CPF.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.424-432
• /
• 1993

AlGaAs/InGaAs/GaAs pseudomorphic structures have been grown by atmosheric pressure-MOCVD . The Al incorporation efficiency is constant but slightly exceeds the Ga incorporation during the growth of AlGaAs layers at $650^{\circ}C$ . Meanwhile , the In incorporation efficiency is constant but slightly less than the Ga incorporation in InGAAs layers. InGaAs/GaAs QWs were grown and their optical properties were characterized . $\delta$-doped Al0.24Ga0.76As/In0.16 Ga0.84As p-HEMT structures were successfully grown by MOCVD and their transport properties were characterized by Hall effect and SdH measurements. SdH Measurements at 3.7K show clear magnetoresistance oscillations and plateaus in the quantum Hall effect confirming the existence of a two-dimensional electron gas(2DEG) and a parallel conduction through the GaAs buffer layer. The fabricated $1.5\mu\textrm{m}$gatelength p-HEMTs having p-type GaAs in the buffer layer show a high transconductance of 200 mS/mm and a good pinch-off characteristics.

• The Korean Journal of Physiology
• /
• v.22 no.1
• /
• pp.89-100
• /
• 1988

Effect of clonidine on the dorsal horn cell responses to mechanical stimulations were studies in 3 spinalized cats and 10 cats with intact spinal cord. The type of dorsal horn cells was determined according to their response patterns to four graded mechanical stimulations (brush, pressure, pinch and squeeze) applied to the respective receptive fields. In the present study the results obtained only from the wide dynamic range (WDR) cells were included. The responses of the WDR cells to noxious mechanical stimuli were selectively suppressed following intravenous administration of clonidine into the experimental animals. The clonidine-induced changes in responses of the WDR cells to mechanical stimulation were not affected by naloxone or propranolol whereas effect of clonidine on WDR cell responses was almost completely abolished after intravenous administration of yohimbine. Also in the spinalized cats results parallel to those observed in cats with intact spinal cord were obtained. The results of present study strongly implies that analgesic action of clonidine can be mediated through excitation of ${\alpha}_{2}-adrenoceptor$ even at the spinal cord level without supraspinal mechanism.

• Journal of Energy Engineering
• /
• v.5 no.2
• /
• pp.160-169
• /
• 1996

Parametric studies are conducted for optimizing the integration design between gas turbine compressor and air separation unit (ASU) of integrated gasification combined cycle power plant. The present study adopts the ASU of double-distillation column process, from which integration conditions with compressor such as the heat exchanger condition between air and nitrogen, the amount and the pressure of extracted air are defined and mathematically formulated. The performance variations of the compressor integrated with ASU are analyzed by combining streamline curvature method and pressure loss models, and the predicted results are compared with the performance test results of actual compressors to verify the prediction accuracy. Using the present performance prediction method, the effects of pinch-point temperature difference (PTD) in the heat exchanger, the amount and the pressure of extracted air on compressor performances are quantitatively examined. As the extraction air amount or the PTD is increased, the pressure ratio and the power consumption of compressor are increased. The compressor efficiency deteriorates as the increase of the flow rate of air extracted at higher pressure level while improving at lower pressure air extraction. Furthermore, through the characteristic curve between generalized inlet condition and efficiency of compressor, optimal integration condition is presented to maximize the compressor efficiency.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.332-332
• /
• 2011

The extreme ultraviolet (EUV) radiation, whose wavelength is from 120 nm down to 10 nm, and the energy from 10 eV up to 124 eV, is widely utilized such as in photoelectron spectroscopy, solar imaging, especially in lithography and soft x-ray microscopy. In this study, we have investigated the plasma diagnostics as well as the debris characteristics between the two types of dense plasma focusing devices with coaxial electrodes of Mather and hypocycloidal pinch (HCP), respectively. The EUV emission intensity, electron temperature and plasma density have been investigated in these cylindrical focused plasma along with the debris characteristics. An input voltage of 5 kV has been applied to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ar gas at pressure ranged from 1 mTorr and 180 mTorr. The inner surface of the cathode was covered by polyacetal insulator. The central anode electrode has been made of tin. The wavelength of the EUV emission has been measured to be in the range of 6~16 nm by a photo-detector (AXUV-100 Zr/C, IRD). The visible emission has also been measured by the spectrometer with the wavelength range of 200~1,100 nm. The electron temperature and plasma density have been measured by the Boltzmann plot and Stark broadening methods, respectively, under the assumption of local thermodynamic equilibrium (LTE).

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.614-622
• /
• 1999

Recent studies have implicated that more rostral components of the trigeminal spinal nucleus including subnucleus oralis (Vo) in orofacial nociceptive mechanisms. Since there is only limited electrophysiological evidence, the present study was initiated to characterize the receptive field and response properties of malls nociceptive neurons in chloralose/urethan-anesthetized rats. Single neuronal activity was recorded in right subnucleus oralis, and types of nociceptive neurons classified wide dynamic range (WDR), NS (nociceptive specific) and deep nociceptive (D) and the mechanoreceptive field (RF) and response properties were determined. A total of 34 nociceptive neurons could be subdivided into 17WDR neurons, 12NS neurons and 5D neurons. Vo nociceptive neurons had RF involving maxillary and/or mandibular divisions mainly located in the intraoral and/or perioral regions. Majority of Vo nociceptive neurons showed spontaneous activity less than 1Hz. The NS and D neurons activated only by heavy pressure and/or pinch stimuli had high mechanical thresholds compared to WDR neurons activated also by tactile stimuli. Vo nociceptive neurons showed a progressive increase of response to the graded mechanical stimuli. 39% of Vo nociceptive neurons received C-fiber electrical input as well as A-fiber electrical input from their RF, and 45% of them responded to electrical stimulation of the right maxillary first molar. 41% of Vo nociceptive neurons responded to noxious heat applied to their RF, and 18% of them showed an immediate burst of discharges following MO application to the right maxillary first molar pulp. These results indicate that Vo is involved in the transmission of nociceptive information mainly coming from intraoral or perioral region including tooth pulp.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2001.12a
• /
• pp.69-73
• /
• 2001

Two opioid peptides, YPLDL and YPLDLF, were isolated from enzymatic digests of spinach ribulose-1, 5-bisphosphate carboxylase/oxygenase (RuBisCO) and named rubiscolin-5 and -6, respectively. These peptides were selective for delta-receptor and the latter was about 3 times more potent than the former. After oral administration in mice at the dose of 100 mg/kg, rubiscolin-6 showed analgesic activity in tail pinch test. It also stimutated learning performance at the same dose in passive avoidance experiment using step-through apparatus. An immunostimulating peptide, MITLAIPVNKPGR, was isolated from a trypsin digest of soybean protein and named soymetide. Immunostimulating activy of soymetide was mediated by fMLP receptor. Interestingly, after oral administration in rats at a dose of 300 mg/kg (po.), soymetide-4 (MITL) protected alopecia (hair-loss) induced by etoposide, a cancer chemotherapy agent. Stimulation of IL-1 release by the peptide was involved in the mechanism. Ovokinin(2-7), RADHPF, is a vasorelaxing peptide released from ovalbumin by the action of chymotrypsin. It lowered blood pressure of spontaneously hypersensive rats (SHR) after oral administration at a dose of 10 mg/kg. RPLKPW, which was designed by replacing 4 amino acid residues in ovokinin(2-7), exhibited hypotensive activity at a dose of 0.1 mg/kg (po.). This peptides was introduced into 3 homologous sites in soybean beta-conglycinin alpha' subunit by site-directed mutagenesis of the cDNA and expressed in E. coli. The minimum effective dose for hypotensive activity of the genetically modified beta-conglycinin alpha' subunit was 10 mg/kg (po.), which is about 1/200 that of ovalbumin.