• 한국광학회지
• /
• 제17권3호
• /
• pp.290-295
• /
• 2006

전기전도도가 높은 구리선 도파로에 THz 전자기파의 결합은 THz 유선방식의 전파에 있어 테라파의 크기 및 주파수 특성을 결정짓는 중요한 요인 중의 하나이다. 본 연구에서는 직경 $480{\mu}m$, 길이 23 cm의 구리선 도파로에 테라파를 전파시켜 1 THz 주파수 범위를 가진 THz 펄스를 측정하였다. 도파로와 transmitter chip 또는 receiver chip 사이의 공극 간격을 최대 $275{\mu}m$까지 확대하여 송신부와 수신부의 결합 특성을 접촉상태와 비교 분석하였다. 실험결과 송신부의 결합민감도가 수신부보다 약 3배 이상 높게 나타났으며 수신부에서 도파로와 receiver사이의 공극을 통하여 테라파가 공기 중으로 전파됨을 알 수 있었다. 또한 구리선 도파로에 pin hole를 위치시켜 pin hole의 직경에 따른 테라파의 변화를 연구하였으며 대부분의 THz field는 구리선 표면에 분포됨을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5974-5979
• /
• 2014

압입 방식으로서 경량화된 부품이 매우 균질한 정밀도로 생산이 되며 프레스의 기술이 향상되고 있다. 압입 방식으로 조립하였을 시 핀과 구멍사이에는 압축력에 의한 변형력이 발생되고 접촉면이 손상을 입는다. 따라서 본 연구에서는 CATIA 프로그램을 이용하여 3D 모델링하였으며, ANSYS 프로그램을 통하여 압입 접촉된 평면에서 손상평가를 하였다. 해석결과, 핀이 들어갈 때 PCB판에 작용하는 하중은 약 21.3N인 것으로 확인되었으며, PCB판이 Pin에서 빠져나올 때의 하중은 약 19.24N으로 나타났다. 또한 구조 해석결과, Pin 1이 본 연구 모델의 모든 부품들 중에서 가장 최대응력이 많이 발생하므로, 대표적으로 Pin 1의 최대 등가응력이 192.96MPa로 나타났다. 압입 접촉 손상 특성을 규명하고 본 연구결과를 실제의 압입 공정의 설계에 응용함으로서 그 파손을 방지하고 내구성을 평가할 수 있다고 사료된다.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.78-85
• /
• 2020

멤브레인(membrane) LNG 운반선 화물창(cargo containment)의 공사 작업대인 비계 시스템(scaffolding system)은 다양한 형상의 부재들로 구성된 대형 트러스 구조물이다. 비계 시스템의 설치 기간 및 공정을 단축하기 위해서는 모듈의 탑재 단위를 기존의 2단에서 8단으로 대형화하는 것이 매우 효과적이다. 모듈이 대형화하여 탑재 하중이 증가하면 메인 수직 파이프를 연결해주는 핀(pin)과 홀(hole) 주위의 국부 응력 증가가 예상되므로 구조안전성을 확보하기 위한 사전 평가가 중요하다. 본 연구에서는 인장강도 시험을 통해 파손 취약 부위를 확인하고 이에 대한 구조 안전성을 정량적으로 검토하기 위해 접촉 응력 해석을 수행하였다. 인장강도 시험을 통해 최상부의 수직 방향 파이프에 발생하는 평균 하중 부근에서 홀의 변형이 육안으로 관찰되었으며, 홀 주위의 응력 크기는 접촉 응력 계산을 통해 확인하였다. 접촉 문제를 Herzian 접촉 응력 관점에서 접근하였고, 핀과 홀을 포함하는 부분의 재료 항복강도와 접촉 응력의 비교를 통해 8단 탑재의 가능성을 검토하였다. 결과로서, 기존 재료의 비계를 이용한 8단 탑재 방안은 부적합함을 확인하였으며, 파손 취약 부위에 대한 정량적 구조평가 결과를 바탕으로 8단 탑재 시의 구조안전성 확보를 위한 방안들을 제시하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.395-396
• /
• 2005

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.63-70
• /
• 2010

We developed a new punching system that generates pinholes expressing texts or images on a plastic plate. The pin-holed plate is used as a new glamorous display board reflecting colorful lights from the light emitting diode (LED) installed on the edge side of the plate. The four degree-of-freedom punching system was designed to make same multiple holes on four plastic plates simultaneously. For this motion, we designed a structure for a simultaneous motion of the system. For even reflection of the lights from texts or images on the board and fast production of the pin-holed boards, fast motion including precise position control is very important. We also built a PC-based integrated control system including a GUI program to help users easily design luminous texts or images on the plastic plate. Also, we conducted a performance test of the system to verify the punching speed and position control of the pin holes on the plate.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1080-1087
• /
• 2009

This paper presents an algorithm to acquire 3D geometric information using a virtual plane method. The method to measure 3D information on the plane is easy, because it's not concerning value on the z-axis. A plane can be made by arbitrary three points in the 3D space, so the algorithm is able to make a number of virtual planes from feature points on the target object. In this case, these geometric relations between the origin of each virtual plane and the origin of the target object coordinates should be expressed as known homogeneous matrices. To include this idea, the algorithm could induce simple matrix formula which is only concerning unknown geometric relation between the origin of target object and the origin of camera coordinates. Therefore, it's more fast and simple than other methods. For achieving the proposed method, a regular pin-hole camera model and a perspective projection matrix which is defined by a geometric relation between each coordinate system is used. In the final part of this paper, we demonstrate the techniques for a variety of applications, including measurements in industrial parts and known patches images.

• 설비공학논문집
• /
• 제28권5호
• /
• pp.171-177
• /
• 2016

Plate heat exchangers have been widely used in various fields because of their high heat transfer coefficients, small area of installation, and ease of maintenance compared to other heat exchangers. However, when plate heat exchanger is used for a long time, leak can occur due to inner crack. Therefore, it is important to understand the inner flow characteristics in plate heat exchangers. In this study, the inner flow characteristics and flow rate of plate heat exchanger were evaluated using various flow directions, pin-hole sizes, and Reynolds numbers. In downflow, initially most water flowed to the opposite of the inlet due to distribution region. Then it gradually had a uniform distribution due to chevron configuration. In upflow, it had a uniform flow consistently due to the dominant gravity effect. As the Reynolds number increased, the leak rate was decreased due to the inertia effect regardless of the flow direction.

• 천문학논총
• /
• 제26권3호
• /
• pp.129-140
• /
• 2011

In this paper, we have studied Sogyupyo (小圭表, small noon gnomon) of the Joseon dynasty. According to the Veritable Records of King Sejong (世宗, 1418 - 1450), Daegyupyo (大圭表, large noon gnomon) with a height of 40-feet [尺] was constructed by Jeong, Cho (鄭招) and his colleagues in 1435, and installed around Ganuidae (簡儀臺, platform of Ganui). On the contrary, the details of Sogyupyo are unknown although the shadow length measurements by Daegyupyo and Sogyupyo are found on the Veritable Records of King Myeongjong (明宗, 1545 - 1567). By analysing historical documents and performing experiments, we have investigated the construction details of Sogyupyo including its development year, manufacturer, and installation spot. We have found that Sogyupyo would be manufactured by King Sejong in 1440 and placed around Ganuidae. And Sogyupyo would be five times smaller than Daegyupyo, i.e., 8-feet. On the basis of experiments, we suggest that although it is smaller, Sogyupyo was equipped with a bar [橫梁] and a pin-hole projector [影符] like Daegyupyo in order to produce the observation precision presented in the Veritable Record of King Myeongjong.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.311-319
• /
• 2013

A clear understanding on cell voltage-reversal behavior due to local hydrogen starvation in a stack is of paramount importance to operate the fuel cell vehicle (FCV) stably since it affects significantly the cell performance and durability. In the present study, a novel experimental method to simulate the local cell voltage-reversal behavior caused by local hydrogen starvation, which typically occurs only one or several cells out of several hundred cells in a stack of FCV, has been proposed. Contrary to the conventional method of overall fuel starvation, the present method of local hydrogen starvation caused the local cell voltage-reversal behavior in a stack very well. Degradation of both membrane electrode assembly (i.e., pin-hole formation) and gas diffusion layer due to an excessive exothermic heat under voltage-reversal condition was also observed clearly.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.359-365
• /
• 2000

Port facilities and marine structures used in marine environment were encountered to corrosion damages because of the influence of $Cl^-$. Generally, to protect these accidents, mainly applied anti-corrosion paint and epoxy coating. But it was still remained erosion-corrosion damage such as impingement erosion, cavitation erosion, deposit attack. There was needs to develope the new coating materials to protective those corrosion damages. This paper, polyester glass flake, vinylester glass flake lining and epoxy coating for SS were investigated electrochemical tests and cavitation erosion test for corrosion behaviour under sea water. The main results obtained are as follows, 1) Surface of epoxy coating appear erosion pin hole but surface of polyester glass flake and vinylester glass flake lining do not appear erosion pin hole after impingement-cavitation erosion test in sea water. 2) Weight loss of polyester glass flake and vinylester glass flake lining do not occur after impingement-cavitation erosion test in sea water. 3) Corrosion current density of polyester glass flake lining less drained than epoxy coating and substrate under corrosion potential.. 4) Corrosion current density of vinylester glass flake lining with three coating less drained than that of polyester glass flake lining with two coating.