• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.108-114
• /
• 2005

The generation of fine relics of suspensions is a significant interest as it holds the key to the fabrication of electronic devices. These processes offer opportunities for miniaturization of multilayer circuits, for production of functionally graded materials, ordered composites and far small complex-shaped components. Some novel printing methods of depositing ceramic and metal droplets were suggested in recent years. In an electro-hydrodynamic printing, the metallic capillary nozzle can be raised to several kilovolts with respect to the infinite ground plate or pin-type electrode positioned a few millimeters from the nozzle tip. Depending on the electrical and physical properties of the liquid, for a given geometry, it Is possible to generate droplets in any one of three modes, dripping, cone-jet and multi-jet. In this experiment, an alumina suspension flowing through a nozzle was subjected to electro-hydrodynamic printing using pin-type electrodes in the cone-jet mode at different applied voltages. The pin-type electrodes of 1, 100, 1000${\mu}m$ in diameter were used to form fine ceramic patterns onto the substrates. Various feature sizes with applied voltages and electrode diameters were measured. The feature sizes increased with the electrode diameter and applied voltages. The feature size was as fine as $30 {\mu}m$.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1352-1358
• /
• 2004

The mechanical spring is one of widely used machine elements. Among various kinds, flat-type spring loaded by a rotating pin was studied. A flat spring was simplified to a cantilever beam, and numerical analysis was attempted. Since the loading pin rotates about a separate axis from the fixed spring or vice versa, the location, direction, and magnitude of the contact force including normal contact and friction loads vary accordingly. Meanwhile, the spring is deformed substantially as the relative motion progresses. Therefore, this problem needs to be formulated taking the follower loading characteristics and geometrical non-linearity into account. Derived nonlinear differential equation was solved to yield the spring deflection, contact force and the torque to rotate the pin, and the result was compared with a finite element solution. Also, the influences of principal design parameters were studied. The proposed methodology is expected to be useful for the design of pin-loaded flat spring and the prevention of mechanical failures in the form of yielding or fatigue failure of spring or severe wear of the components.

• 미생물학회지
• /
• 제31권2호
• /
• pp.166-174
• /
• 1993

Streptomyces coelicolor (Muller) 의 세포에 $100 \mu$M 의 과산화수소를 1시간 동안 처리하여 과산화수소 스트레스중에 생성되는 단백질을 L-[$^{35}S$] methionine 을 이용하여 순간 표지하였다. 단백질을 추출하여 2차원 겔 전기영동으로 분석한 결과 지수 성장기의 세포가 가지는 총세포 단백질 중 약 100개의 단백질의 합성이 과산화수소에 의해 증가되는 것을 관찰하였다. 이들을 Pin(peroxide inducible) 단백질이라고 명명하고 과상화수소 처리 후 발현이 증가되는 시간에 따라 세 그룹으로 나누었다. 약 60 개의 Pin 단백질은 과산화수소 처리후 20분 이내에 발현이 증가하여 1시간동안 지속적으로 다량 합성되었다. 정체 성장기의 세포에서는 62개의 단백질의 합성이 과산화수소에 의해 증가되었으며, 이 중 21 개의 단백질은 지수성장기의 Pin 단백질과 일치하였다. 과산화수소에 대한 저항성이 증가한 세가지 돌연변이체의 단백질을 지수 성장기에서 추출하여 2 차원 겔 전기영동으로 분석한 결과, 각각의 경우 15, 17, 15개의 Pin 단백질을 야생형보다 항상적으로 다량합성하는 것을 관찰하였다. 이 pin 단백질 중 9개 (D74.7 a, E76.0c, E23.3, F50.7, F47.2a, F25.5, G39.6b, G24.0, H39.6a) 는 두가지 돌연변이체 모두에게 증가되었다. 따라서 이 단백질들은 S. coelicolor 가 과산화수소 스트레스에 대응하는데 있어 중요한 역할을 담당한다고 추정된다.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1062-1068
• /
• 2002

In our previous study, it was proven that the mean size and the total number concentration of carbon soot particles emitted from a $C_2$H$_4$ normal diffusion flame decreased when a DC corona was discharged to pin-pin electrodes. In this work the effect of AC corona discharge on soot emission was investigated and compared with that of DC corona discharge. For the pin-pin electrodes the size of soot particles and the number concentration decreased by the AC voltage. There were only slight changes in size distribution with frequencies, while the magnitude of applied voltage was constant. When the electric field was applied to plate-plate electrodes, the size and the number concentration also decreased with the applied AC voltages. For applied voltages above 2kV the effect of frequency increase on the soot emission was effective.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.741-744
• /
• 2009

본 논문에서는 Pin-type Viboratctile Display Device와 Gyroscope 및 가속도 센서, USB HID을 이용한 글러브 마우스를 제시한다. 이 장치는 장갑 안에 위치한 Gyroscope와 가속도 센서를 통해 사용자의 손목의 움직임을 인식하고 Bluetooth를 통해 본 논문에서 사용하기 위해 제작된 마우스 인식이 가능한 USB 동글에 데이터를 전달한다. 그리고 특정 어플리케이션을 통해 PC상의 정보를 사용자에게 Pin-type Vibrotactile Display 장치를 통해 촉감을 전달한다. 이 마우스는 USB 장치를 제외한 시스템에 필요한 모든 장치들을 글러브 안에 위치하여 Wearable 형태의 시스템을 구현한다. 사용자가 일반적인 공간 마우스를 사용하고 싶으면 다른 어플리케이션 없이 USB 동글만으로 인식이 가능하고 진동촉각을 느끼고자 하면 PC의 시리얼 통신 포트를 USB 동글에 연결하여 사용할 수 있다.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.259-265
• /
• 2009

In the traditional percussion locks of small arms, a firing pin is struck by a hammer rotating on a single center of rotation, which makes the percussion mechanism simple and reliable. In order to strike the firing pin by the hammer, however, the firing pin should be located within the radius of rotation of the hammer. As the distance between the striking point of the firing pin and the center of rotation of the hammer becomes longer, the radius of rotation of the hammer should also be increased, which results in the increase of the volume and weight of the small arms because the hammer needs the more space for its operation inside of the small arms. In this paper, a link type percussion lock was newly proposed in order to overcome the limitation of designing small arms when using traditional percussion locks, as mentioned above. The link type percussion lock was modeled by using multi-body dynamics software and designed to satisfy the requirements such as striking force level of the hammer exerting on the firing pin enough to detonate the percussion cap of ammunitions and the safety on the accidental drop. It was applied to the newly developed dual-barrel weapon system, in which the weight and overall length are important design factors, and verified by durability test and drop test on the ground.

• Advances in Computational Design
• /
• 제6권1호
• /
• pp.31-42
• /
• 2021

This research aims to demonstrate the optimal geometrical design of splayed multiple cross-sectional pin fin heat sinks (SMCSPFHS), which are a type of side-inlet-side-outlet heat sink (SISOHS). The optimiser strength Pareto evolutionary algorithm2 (SPEA2)is employed to explore a set of Pareto optimalsolutions. Objective functions are the fan pumping power and junction temperature. Function evaluations can be accomplished using computational fluid dynamics(CFD) analysis. Design variablesinclude pin cross-sectional areas, the number of fins, fin pitch, thickness of heatsink base, inlet air speed, fin heights, and fin orientations with respect to the base. Design constraints are defined in such a way as to make a heat sink usable and easy to manufacture. The optimum results obtained from SPEA2 are compared with the straight pin fin design results obtained from hybrid population-based incremental learning and differential evolution (PBIL-DE), SPEA2, and an unrestricted population size evolutionary multiobjective optimisation algorithm (UPSEMOA). The results indicate that the splayed pin-fin design using SPEA2 issuperiorto those reported in the literature.

• 한국영어학회지:영어학
• /
• 제3권4호
• /
• pp.589-609
• /
• 2003

The purpose of this paper is to show that lexical equivalency in translation can be achieved when it is based on semantic prosodies of lexical items. This paper examines the semantic prosodies of two seemingly synonymous English adjectives ‘empty’ and ‘blank’ on the basis of the corpus given in Cobuild English Collocations on CD-ROM and proposes that they are different in terms of spatial dimensions. Thus when a Korean equivalent pin derived from the verb pita is translated into English, syntagmatic phraseological environments of the Korean adjective must be taken into account to attain the equivalency of the source and target languages. Relevant Korean corpus was taken from the 21st Century Sejong Plan (2002). Out of 12 examples of pin konggan, five appear to be equivalent to ‘blank’ and seven to ‘empty.’ The five to seven ratio in different usage indicates that the equivalency problem concerning the lexical item pin is not a trivial matter in translation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.130-137
• /
• 1996

Several cold extrusion processes to produce an axisymmetric steel piston-pin are investigated for comparing each other. Two methods among four conventinal ones are selected to be simulated using the rigid-plastic finite element method. One of the both methods using a mechanical press has one stage process and the other utilizing a cold header applies a multi-stage process to produce a final product. Because the main process is a backward extrusion, the design criteria such as the backward extrusion ration and punch diameter to depth rationare ocnsidered. FEM analysis is performed mainly for strain distributin and load-stroke relationshis. Based on the results of preliminary simulatin, both process sequences are proved to have proper charicteristics suitable for each production method in terms of maximum load. Those simulation results will be a good design criteria in the future work to advance the manufacturing process.

• 조명전기설비학회논문지
• /
• 제30권1호
• /
• pp.66-71
• /
• 2016

In this study, electrical and spectroscopic characteristics were investigated in the pin to plate discharge of 0.9% weight per unit volume saline solution. The positive and positive- and negative-going dc pulse with 5% duty ratio were applied to tungsten pin electrode. The more amount of discharge current flew in negative discharge. The temperature, which is considered as a local value in the vicinity of vapor of discharge, was about 3,000K which is much higher than the value recommended to be controlled. It can be suggested that not only the temperature of liquid but also the local temperature of vapor is monitored to investigate damages on tissue or cells in biological application.