• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.8
• /
• pp.1076-1083
• /
• 2009

The physicochemical properties of rice flour produced by 3 different grinding methods using various steeping times (3, 6, 9, and 12 hrs) were investigated. Roller mill gave coarse rice flour; the pin mill, intermediate flour; and mixed when both (roller & pin mills) were used. With the increase of steeping times, the rice flours became finer and the contents of crude protein, crude fat and crude ash decreased. Damaged starch was noticeably high in rice flour by roller & pin mills compared to those by roller or pin mills alone. Amylose contents, solubility and swelling power increased as the steeping times increased. Water binding capacity was the highest in roller & pin mills, followed by pin mill. In scanning electron microscope (SEM), pin mill showed distribution of separated fine particles of rice flours. The physicochemical properties of rice flours showed many differences by steeping times of rice and grinding methods. With sufficient steeping times, the rice flours obtained from pin mill were relatively fine having less damaged starch.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1742-1748
• /
• 2014

This study investigated the quality characteristics of commercial rice flour (CRF) and rice flours prepared by different milling methods for sulgidduk. For particle distribution, dried rice flour after the 1st roll mill using a pin mill showed a particle size of greater than $710{\mu}m$, whereas a particle size less than $250{\mu}m$ accounted for 48% of whole rice flour. This proportion was higher than CRF after the 2nd step roll mill. Crude protein, lipid, and ash contents were significantly highest in 1st roll mill samples. For color, roll & pin made up of many small particles showed a high L value. CRF and roll & pin showed significantly higher starch damage and water-holding capacity, whereas pasting temperature, peak viscosity, and setback of RVA pasting characteristics were lower than 1st roll mill. When rice cakes were made from three kinds of rice flour, roll & pin was not significantly different compared to the CRF. However, rice cakes made with 1st roll milled rice flour showed rough crumb and crust. Rice cake made with roll & pin or CRF showed similar characteristics for texture. In the quantitative descriptive analysis, rice cake made with roll & pin showed better appearance, flavor, taste, texture, and overall acceptability than CRF and 1st roll mill. Therefore, rice flour prepared by roll & pin could be applied to sulgidduk with high quality.

• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.313-318
• /
• 1999

The Properties of rice flour and consumed electricity to make rice flour were compared among three different process ; 1. roll mill after soaking rice in water, 2. roll mill after tempering, 3. try pin mill. When rice was milled by roll mill and pin-milled after tempering for 10 hrs(TRPMR), consumed electricity and moisture content of rice flour were the least. Particle size of rice flour prepared with TRPMR was 87.4% of 100 mesh or more which was the highest number among the rice flour prepared using different processes. Gelatinization temperature of the rice flour was 63.2$^{\circ}C$ and was 1.3$^{\circ}C$ lower than that of rice flour prepared with other processes. Viscosity of the rice flour prepared by TRPMR was the least. Whiteness of the rice flour prepared by TRPMR was similar to that of wheat flour.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.500-507
• /
• 2008

By Using various grinding mill in powder cosmetics manufacturing process; screen milt and pin mill, jet mill, properties of the powder and grinding mills were studied; talc, mica, nylon powder, silica, titanium dioxide. Besides, the experiments fur evaluation of grinding were performed by using iron oxides those are tracers. In powders of plate shape, they were grinded more vertically than horizontally at the screen mill and pin mill, although were all grinded vertically and horizontally at the jet mill. The spheric powders became the primary particles or aggregation by electrostatic interaction at the screen mill and pin mill. But, at the jet mill, they resulted the agglomeration or transformation or damage up to 2bar. Titanium dioxides became the primary particles by all grinding mill. Pin mill has an excellent result in experiments which is a change of the tone of color by grinding. From these results, suggest that the jet mill is used to pre-treat of powders of plate shape in practical cosmetic manufacturing process, and the screen mill and pin mill are used to match the color of powder cosmetics. If industrial process condition is taken into consideration, suggest that 4times of grinding is excellent on grinding effect by the screen mill, and twice grinding by the pin mill and grind air pressure of 1bar by the jet mill.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.546-551
• /
• 1993

Rice flour obtained by four different milling methods, Pin mill. Colloid mill, Micro mill, and Jet mill, were used to investigate physico-chemical properties and product. Crude fat, ash, and protein contents of rice flours between different milling methods were similar. Blue value, amylose content, and damaged starch which related to properties of rice flour were reduced in the order that of Jet mill, Micro mill, Colloid mill, and Pin mill. Water absorption index, water solubility index, and water retention capacity increased as damaged starch increased. Hardness of gel(15%) is the highest value for Pin mill. The finer granules (Jet mill) had lower gelatinization onset(To) and peak(Tp) than any other rice flours. Those result are simillar with amylogram properties. Enthalpy of gelatinization increased as damaged starch increased. Jet mill had the highest score (p<0.05) of overall test in sensory evaluation and good paste properties.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1078-1083
• /
• 1996

During the pearling process of hull-less barley, protein, lipid, ash and insoluble dietary fiber (IDF) contents decreased, while soluble dietary fiber (SDF) and ${\beta}-glucan$ contents slightly increased. Depending on milling methods and types of grinding mills used, there were differences in particle size distribution of barley flour. Flour particle size was smaller in the following order of Fitz mill, Ball mill, Pin mill, Cyclotec sample mill and Jet mill. Color (brightness) was closely related to the particle size of barley flour. Damaged starch (%) in pearled barley flour was the highest in Jet mill among different mills. Flours prepared with Cyclone mill and Pin mill had a reasonable amount of damaged starch. Flour produced by Fitz mill showed the lowest amount of damaged starch. Scanning electron microscopy (SEM) of the flour samples demonstrated different sizes and shapes of particles consisting of starch granules and cell wall materials. Damaged starch tended to increase water absorption index (WAI), water solubility index (WSI), and water retention capacity (WRC). Pasting viscosity determined by amylograph was relatively high in Pin-milled and Cyclone-milled flours. Viscosity was the lowest in coarsely ground flour by Fits mill.

• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.606-611
• /
• 2007

This study was conducted to beneficiation of magnesite by dry grinding and air classification. The raw ore was ground in a ball mill and pin mill controlled with grinding time and linear velocity of grinding media and fractionated in an air classifier. Pin mill is more efficient than the ball mill for liberation. As a result, the MgO grade of concentrate was 47.1% with recovery of 51.51% for classified with 3,000rpm of air classifier for ground at 13,000rpm in pin mill.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.257-262
• /
• 2002

본 연구에서는 분쇄방법에 따른 감초 분쇄생성물의 특성을 분석한 결과는 다음과 같다. 1. Hammer mill의 경우 d$_{80}$=750$\mu\textrm{m}$로 중간미분쇄의 입도범위를 가지며 비표면적은 0.269m/g로 분석되었고, Pin mill의 경우 d$_{80}$=600$\mu\textrm{m}$로 Hammer mill보다 입자크기는 조금 작으나 중간미분쇄영역의 입도범위를 가지며 비표면적은 0.324m$^2$/g로 분석되었고, Turbo mill은 d$_{80}$=250$\mu\textrm{m}$와 비표면적은 0.370m$^2$/g로 입자의 크기가 가장 작아 다른 분쇄기보다 분쇄능이 가장 우수한 것으로 분석되었다. 2. Hammer mill의 분쇄메커니즘은 대부분 충격, 일부 전단과 마찰에 의해 분쇄가 행해지고, Pin mill은 핀 사이에서의 전단, 충격, 마찰에 의해 분쇄된다. 즉 충격과 마찰에 의한 분쇄는 전단력에 의한 분쇄메커니즘보다 분쇄 능이나 분쇄효율이 상대적으로 낮은 것을 알 수 있었으며 주로 전단력과 충격, 반발력에 의해 분쇄가 이루어지는 Turbo mill의 분쇄능 및 분쇄 효율이 우수함을 알 수 있었다. 본 연구에 의해서 감초와 같이 섬유질을 많이 함유하고 있는 원료를 분쇄할 경우 분쇄메커니즘이 전단력인 분쇄기가 가장 적합하고, 분쇄중 소요되는 동력 면에서도 기존 분쇄기보다 우수한 Turbo mill의 분쇄조건을 확립해야 한다고 사료된다. 사료된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.673-674
• /
• 2012

• Korean journal of food and cookery science
• /
• v.29 no.2
• /
• pp.129-135
• /
• 2013

The objective of this research was to investigate physicochemical properties of waxy sorghum flours by different milling methods (pin mill and ultra fine mill). Four different sorghum flours were used for the experiments ; PWS (pin milled whole sorghum flour), PS (pin milled sorghum flour without bran), UFWS (ultra fine milled whole sorghum flour), UFS (ultra fine milled sorghum flour without bran). The contents of crude ash and total dietary fiber were the highest in PWS. Amylose content of pin milled sorghum flour was higher than that of ultra fine milled flour. The mean particle size of pin milled flours was six times lager than ultra fine milled flours. The L values of UFS and UFWS were higher than those of PS and PWS, whereas a and b values were higher in PWS. The water binding capacity was highest in UFWS, and solubility was higher in PS and UFS. Swelling power of flours was highest in UFS. The damaged starch content was higher in PS and UFS, which means damaged starch of sorghum flours significantly affected by polishing than milling method. The pasting properties were higher in the pin milled flours. Initial pasting temperature of pin milled flour was ranging from 70.5 to $73.1^{\circ}C$, which are higher than ultra fine milled flour ($68.6^{\circ}C$). The contents of total polyphenol were higher in PWS and UFWS than those of PS and UFS, there was no difference between the two milling methods. The results of this study indicate that physicochemical properties of sorghum flour were affected by milling methods as well as bran.