• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1880-1890
• /
• 2015

The purpose of this study was to development of the 'convergence motive' scale for interdisciplinary knowledge fusion. Based on results from literature review, this study clarifies a theoretical ground for 'convergence motive'. Initial items to measure this concept were verified by content analysis and then finalized. After a pilot test done with 568 college students, gathered data were analyzed by item selection and exploratory factor analysis to verify their validity. Next, the main test implemented with 1,211 college students was analyzed with exploratory factor analysis using the method for rotation based on maximum likelihood analysis and direct oblimin for validating the final items to measure 'convergence motive'. As a result, the scale for 'convergence motive' consists of 43 items to measure the following four factors: collaboration to identifying and solving problems, challenge of a new perspective, communication for convergence, cohesion for convergence. Construct validity and criterion-related validity were performed at last to check this scale's theoretical construct. In conclusion, this study concluded that the scales for convergence motive could be generalized and applicable to other samples.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.6
• /
• pp.38-47
• /
• 2013

This study was performed to identify the optimal operating conditions and to evaluate the xylene removal efficiency, applying in-situ soil flushing with the low concentrated solution of 'Tween 80' at the xylene contaminated site. The pilot scale test site ($5m{\times}5m{\times}3m$), was mainly composed of 'sandy loam', with the average hydraulic conductivity of $9.1{\times}10^{-4}cm\;s^{-1}$. The average xylene concentration of the site was 42.1 mg $kg^{-1}$, which was more than 2.5 times higher than Korea soil pollution warning limit (15 mg $kg^{-1}$). For the soil flushing, 7,800 L of 0.1~0.2% surfactant solution was injected into three injection wells at the average injection time of 9 hr $d^{-1}$ for 10 days, followed by the additional only groundwater injection of 6,000 L. The same amount of the effluent solution was extracted from three extraction wells. From the analysis for xylene concentration of all effluent at 3 extraction wells, total 166 g of xylene was removed by in-situ surfactant flushing. Even though the residual xylene concentrations of 7 soil sampling locations in the test site were different due to the soil heterogeneity, from the comparison of xylene concentration at 7 locations before/after the feasibility test, 53.9% of the initial xylene in the site was removed from three extraction wells (mainly Ext-N and Ext-M well). The results showed that the in-situ soil flushing by using low concentrated 'Tween 80' solution had a great potential to remediate the xylene contaminated site.

• Journal of Korean Elementary Science Education
• /
• v.41 no.1
• /
• pp.65-78
• /
• 2022

This study aims to 1) verify the validity of the Science self-efficacy scale and 2) perform a latent mean analysis of the background variables about a pre-service teacher. The study uses pre-tests to analyze data from 187 pre-service teachers, which uses Tark's Science self-efficacy scale (2011). To identify the factor structure, exploratory factor analysis was performed. Based on the results of the pilot test, the expert group council revised the scale for the pre-service teachers to respond to the 3-factor structure. In the main test, 354 data were analyzed through a modified Science self-efficacy scale, and exploratory and confirmatory factor analyses were performed. The results of the study are as follows: First, in the pilot test, the pre-service teacher responded to a 3-factor instrument, but the validity of two items was examined further below. Second, the pre-service teachers responded to a 3-factor instrument on 29 items for the modified Science self-efficacy scale. The total reliability of the instrument was .886 and the reliability of each factor was analyzed as .882-.886. Finally, the latent mean analysis by gender showed that females have a higher self-regulation efficacy factor and males have a higher self-confidence factor (Cohen's d > .3). Furthermore, there is a significant difference in task difficulty preference and self-regulatory efficacy factor (Cohen's d > .8) between the college preparatory and science subject preference. This study provides important insights into and contributions to the accurate scientific self-efficacy diagnosis of pre-service teachers, as well as proposes a curriculum to improve the scientific self-efficacy of prospective teachers.

• Journal of Fisheries and Marine Sciences Education
• /
• v.21 no.1
• /
• pp.16-27
• /
• 2009

The purpose of this study was to develop of learning strategy scale for college students. This study further classified several sub-areas and defined each concepts of learning strategy. Based upon the classification of each sub-areas, tentative test items were developed through the verification of validity by three professionals. A pilot study of the developed scale was administered to 239 college students. And the research collected major data from 1,012 college students. Data were analyzed to obtain item quality, reliability, and validity analysis. The results of this study were as follows. The scale for learning strategy was defined by eight factors and they were 'self-management strategy', 'examination-readiness strategy', 'cognitive strategy', 'memorizing strategy', 'reporting strategy', 'resource-utilization strategy', 'self-regulated strategy', 'cooperative learning strategy'. The results of the confirmatory factor analysis proved the eight factors in the learning strategy. And criterion validity evidence was also obtained from a correlation analysis of the level of academic achievement.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• Journal of Environmental Science International
• /
• v.25 no.3
• /
• pp.425-438
• /
• 2016

This study carried out zeta potential measurements of the Microcystis sp. under various solutions condition and investigated the characteristics of Microcystis sp. through the size control of microbubbles to eliminate algae that causes problems in aquatic ecosystems and human activities. DAF process was adopted and several coagulants were used to remove the Microcystis sp. CCD Camera was used to measure and analyze the size of microbubble, and fluorescent microscope was used to observe the particle, algae species and community. Zeta potential behavior of the algae was analyzed by using ELS-Z. Lab-scale and pilot-scale experiments were conducted to test flotation process. Polyaluminium chloride(PAC) coagulant was used, and the removal efficiency of the algae was assessed through Chlorophyll-a analysis. In the Lab-scale experiment, 2.2 ppm, 11 ppm, 22 ppm, and 44 ppm of polyaluminium chloride was injected to coagulate the algae. The coagulated algae was floated by the microbubble. The microbubbles in the experiments were generated at a air pressure of 450 ~ 550 kPa. The microbubble size was controlled in $36{\mu}m$, $100{\mu}m$, and $200{\mu}m$, respectively by using different diffuser. The results of lab-scale experiments on flotation plant indicated that the average removal rate was about 90% or above for 11 ppm, 22 ppm, and 44 ppm of polyaluminium chloride. On the other hand, in the pilot-scale experiment, the removal efficiency was in the range of 85% to 95% in all dose ranges of polyalumium chloride and aluminium sulfate coagulants.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.207-214
• /
• 2014

With the depletion of high grade coal, it is indispensable to be used co-combustion of low rank coal with bituminous coal in pulverized coal-fired power plants. This study describes the detailed measurements of combustion characteristics of bituminous and subbituminous coal in a 0.7MWth pilot-scale test facility. This experimental works include the measurement of gas temperature, gas concentrations along with the reactor axial and radial distance at the condition of excess air ratio of 1.2. The solid sampling was carried out and analyzed with the combustion of bituminous coal. The main reaction zone of coal flame in a reactor was formed about 1 m from the swirl burner, and at downstream, the fully developed temperature and species distribution was observed. The sampled particles of bituminous coal in a reactor revealed the complete carbon burn-out was achieved just after an main combustion zone.

• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.277-284
• /
• 2015

Experiments for highly concentrated contaminants in pig waste slurry were carried out for the feasibility test of a pilot-scale innovative process scheme of engaging autothermal thermophilic aerobic digestion (ATAD) and expended granular sludge bed (EGSB) followed by sequencing batch reactor (SBR) system. Contaminants in pig waste slurry such as organic substance, total nitrogen (TN), ammonia nitrogen and total phosphorus (TP) contents were successfully reduced in the system. Total volatile solids (TVS) and chemical oxygen demands (COD) for organic matter in the feed were 32.92 g/L and 42.55 g/L respectively, and they were reduced by about 98.7% and 99.2%, respectively in the system. The overall removal efficiencies for TN and ammonium nitrogen were found to be 98.1 and 98.5%, respectively. The overall removal efficiency for total phosphorus was also found to be 92.5%. Faecal coliform density was reduced to <$1.2{\times}10^4CFU/g$ total solids. Biogas and $CH_4$ were produced in the range of 0.39-0.85 and $0.25-0.62m^3/kg$ [VS removed], respectively. The biogas produced in the system comprised of $295{\pm}26ppm$ (v/v) [$H_2S$].

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.429-447
• /
• 2020

The considered simulation tasks are based on an electrometallurgical process development strategy and associated telemanipulator simulation systems are proposed with various scales of experimental facilities. Fundamentally, target facilities are assumed to be operated only by remote handling systems because the considered process is operated in hazardous environments. Futhermore, the feasibility at various scales should be experimentally verified with gradual increase in throughput. In this regard, bench, engineering, and pilot-scale simulation systems are important early-stage tools for assessing the practical operability of the target process with the material handling systems. Such simulation systems are highly customized for applications and are a precursor to larger pilot and demonstration-scale plants. This paper introduced and classified the developed simulator systems for this approach at various scales using remote handling systems which were assembled inside a virtual target facility, and the manmachine interface was included for a more realistic operation of the simulator. The results obtained for each simulator show the feasibility and requirement for improvement of the systems for the considered test issues with respect to the operation and maintenance of the process.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.906-917
• /
• 1996

This study was conducted to find possible application areas of the by-products generated from the incineration of rice husk. To this end, a pilot-scale rice husk incinerator system was constructed and its performed test was carried. Major findings are summarized as follows. 1. The rice husk incinerator system developed in this study performed satisfactory in terms of thermal efficiencies. At the optimum operating conditions, thermal conversion efficiency and heat exchanger efficiency was 97% ad 60%, respectively, while overall thermal efficiency of the system was 58%. Under all conditions tested, temperatures in the combustion chamber were quite uniform and crystallization of SiO$_2$ in the ash was negligible. 2. NOx and SOx content in the flue gas was well below the legal limit but the CO concentration was around the legal limit. 3. Thermal energy from combustion was successfully recovered by a heat exchanger to provide hot water, ash was found a good supplementary cementing m terial, and the flue gas also was an acceptable $CO_2$ supplier to greenhouses.