• 상하수도학회지
• /
• 제30권1호
• /
• pp.33-40
• /
• 2016

In this study, a fluorescent silica nano particle is used as the surrogate for challenging test of membrane surface integrity. The particles are functionalized by a fluorescent dying agent so that as an ultraviolet light is imposed a bright fluorescent image from the particles can be taken. If a membrane surface is damaged and has a compromised part larger than the size of surrogate the fluorescent particles would pass through and contained in the permeate. An operator can directly notice whether the membrane surface is damaged or not by detecting a fluorescent image taken from the permeate. Additionally, the size of compromised part is estimated through analysing the fluorescent image in which we surmise the mass of particles included in the permeate by calculating an average RGB value of the image. The pilot scale experiments showed that this method could be applied successfully to determine if a membrane surface had a damaged parts regardless of the test condition. In the testing on the actual damaged area of $4.712mm^2$, the lowest error of estimating the damaged area was -1.32% with the surrogate concentration of 80 mg/L, flux of $40L/m^2/hr$ for 25 minutes of detection. A further study is still going on to increase the lowest detection limit and thus decrease the error of estimation.

• 한국추진공학회지
• /
• 제26권5호
• /
• pp.63-73
• /
• 2022

국내 설비를 활용하여 실기체급 비행체 모델에 대한 M4 준자유류 시험을 수행하였다. 시험장치 및 비행체 모델은 반복적인 전산유체해석을 통해 통합적으로 설계/제작되었고, 해당 설비를 목표 시험 조건까지 가동하여 시험장치의 M4 노즐이 완전히 팽창하는 것을 확인하였다. 비행체 모델의 흡입구 주변의 가시화 영상을 획득하여 경사충격파가 생성되면서 비행체의 흡입구가 시동하는 것을 관측하였다. 비행체의 가변노즐을 구동하여 배압을 조절하면서 비행체 내부 유로의 벽면 압력 분포를 획득하였고, 연소기 내 화염안정화장치에서 점화용 토치 점화 및 점화보조제의 연소 현상을 관측하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.840-843
• /
• 1997

We applied a DCS which was developed in Korea to test furnace. Test furnace is a pilot-scale plant made for finding combustion in firing coal. In this paper, we describe control system which was implemented in test furnace in detail. Finally, we describe the fire box temperature control loop, and show fire box temperature control result during commissioning stage using implemented control system.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권5호
• /
• pp.1-7
• /
• 2016

The removal of non-aqueous phase liquids (NAPLs) from groundwater using pure water, via pump and treat, is quite ineffective due to their low solubility and hydrophobicity. Therefore, the objectives of pilot tests were to select potentially suitable surfactants that solubilize tetrachloroethylene (PCE) and trichloroethylene (TCE) present as contaminants and to evaluate the optimal range of process parameters that can increase the removal efficiency in surfactant-enhanced soil flushing (SESF). Used experimental method for surfactant selection was batch experiments. The surfactant solution parameters for SESF pilot tests were surfactant solution concentration, surfactant solution pH, and the flow rate of surfactant solution in the SESF pilot system. Based on the batch experiments for surfactant selection, DOSL (an anionic surfactant) was selected as a suitable surfactant that solubilizes PCE and TCE present as contaminants. The highest recovery (95%) of the contaminants was obtained using a DOSL surfactant in the batch experiments. The pilot test results revealed that the optimum conditions were achieved with a surfactant solution concentration of 4% (v/v), a surfactant solution pH of 7.5, and a flow rate of 30 L/min of surfactant solution (Lee and Woo, 2015). The maximum removal of contaminants (89%) was obtained when optimum conditions were simultaneously met in pilot-scale SESF operations. These results confirm the viability of SESF for treating PCE and TCE-contaminated groundwater.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.121-128
• /
• 2009

Objectives of this study were to investigate influencing factors of detention time, particle size distribution, and filter medium characteristics for waterworks sludge dewatering. The stepped pressure filtration was carried out with lab scale apparatus and the filter press pilot test for dewatering was conducted at the water treatment plant. Effects of filter medium and polymer dose were examined through observing water content and dewatering velocity and cyclic dewatering rate with filter press pilot test. Relationships among detention time, particle size distribution and filtration resistance were analyzed. Prolongation of sludge detention time was found to cause blinding phenomenon in cake and filter medium and to decrease dewatering process efficiency. The average specific resistance increased according to detention time. In pilot test of dewatering for thickened sludge with Nylon Multi-NY840D and Nylon Mono-100% filter media, dewatering velocities were 0.92 and $0.93kg\;DS/m^2{\cdot}hr$ according to 0.1% polymer dose of dried solids weight base. And cyclic dewatering rates were 2.45 and $2.50kg\;DS/m^2{\cdot}cycle$ cycle for the Nylon Multi-NY840D and Nylon Mono-100% media. Dewatering velocity of polymer dosed sludge was observed to be higher than that of non-polymer sludge.

• 한국방재안전학회논문집
• /
• 제12권1호
• /
• pp.23-34
• /
• 2019

농촌지역 하천이나 호소수 수질 개선을 위한 비점오염원의 관리 및 저감은 시급한 현안이다. 본 연구에서는 농촌지역의 비점오염 저감을 위하여, 개비온 매트리스호안공에 혐기/호기의 구역을 적용한 자연형 비점오염처리 하천호안을 제안하고, 이의 축소모형 실험(1/6 축적) 및 현장 적용(가로2.0 m 세로 3.0 m 높이 0.4 m의 3단 격벽의 호안)을 통하여 활용성을 평가하였다. 개비온 매트리스 내부에 골재를 채운후 차수 격벽을 설치하고, 호안 법면의 자연 경사를 활용하여 혐기/호기 조건의 여과대를 조성하여 오염물질을 다단으로 처리하였다. 또한 호안공의 표면에 식생을 활착시켜, 토사의 표면 유입을 차단하고, 추가적으로 식생에 의한 정화 기능을 도모하였다. 본 호안공의 축소모형 및 현장 적용에서의 화학적산소요구량(COD) 및 질소성분(T-N, $NH_4{^+}-N$, $NO_3{^-}-N$)의 모니터링 결과, Lab Scale에서는 TCOD 17%, SCOD 35%, TN 14%, $NH_4{^+}-N$ 62%, $NO_3{^-}-N$ 33%의 제거효율을 나타내었고, pilot plant 시운전에서는 TCOD 24%, SCOD 29%, TN 47%, $NH_4{^+}-N$ 50%, $NO_3{^-}-N$ 33%의 제거효율을 나타내었으며, pilot plant 시운전에서는 29%의 TP 제거효율도 달성하였다.

• 한국사회복지학
• /
• 제67권2호
• /
• pp.5-31
• /
• 2015

본 연구는 기업사회공헌활동 측정을 위한 척도를 개발하고, 신뢰도와 타당도를 검증하기 위한 것이다. 이를 위해 사회책임에 대한 국제표준인 ISO26000의 지침을 기업사회공헌활동에 적용하여 기초문항을 구성하고, 기업사회공헌 담당자를 대상으로 한 FGI와 개별면접, 자문, 예비조사를 거쳐 32개 예비문항을 선정하였다. 척도의 타당화를 위해 개발된 예비문항을 94개 기업의 사회공헌담당자를 대상으로 평가하였다. 연구결과 탐색적 요인분석을 통해 최종 6개 요인, 27개 문항을 확정하였으며, 확인적 요인분석을 통해 구성타당도와 판별타당도를 확보하였다. 또한, 알파계수방법, 측정의 표준오차, 문항분석 방법을 사용하여 신뢰도를 검증한 결과 안정적인 신뢰도를 보였다. 이러한 결과를 바탕으로 본 연구의 함의를 논하였다.

• 한국미생물·생명공학회지
• /
• 제21권6호
• /
• pp.609-614
• /
• 1993

The optimum conditions for the submerged mycelial culture of Lentinus edodes SR-1 were elucidated to be incubation temperature of 25C, initial pH 4.0, agitation of 300 rpm, inoculation of 10.0%(v/v), and aeration of 1.0 v/v/m in TGY medium. The optimum c/n ratio and economic yield coeffcient for the submerged mycelial culture were 13.1:1 and 0.45 respectively. As the plant growth hormones test, SCM medium containing 0.5ppm of 2,4-dicholorophenoxyacetic acid increased mycelial yield in 1.1%, but 6-benzylaminopurine was not effective.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권2호
• /
• pp.10-18
• /
• 2013

The pilot scale biopile system was designed and operated for evaluation of bioremediation efficiency for petroleum contaminated soil. The pilot scale biopile consisted of biopile dome, aeration system and monitoring system and two biopiles were operated with nutrients and inoculum for more 100 days. The test pile A and B were analyzed with regard to pH, total carbon contents, water contents, nutrients (N, P) and TPH. The initial TPH concentrations for pile A and pile B were about 10,000 mg/kg and 2,300 mg/kg, respectively. After 100 days, the TPH contents decreased about 70% in the pile A and 30% in the pile B. Also, n-$C_{17}$/pristane and n-$C_{18}$/phytane ratios in all pile were significantly changed. The microbial densities in the pile A was increased by approximately $10^7$ CFU/g-soil~$10^8$ CFU/g-soil, but there was almost no changed in the pile B. The average biodegradation rates were calculated about 66.8 mg/kg-day in the pile A and 10.9 mg/kg-day in the pile B. Over the course of operation period, pile temperature was considered the major limiting factor for the efficiency of all biopiles.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.365-372
• /
• 2012

Purpose: Performance of slurry composting and biofiltration with methane production (SCB-M) using swine manure and sawdust was evaluated. The suitable specific liquid input (SLI) was determined at lab-scale SCB. Method: In lab-scale SCB, the SLI test was performed at liquid input rate of 0.04, 0.09, $0.17cc/cm^3$ with constant sawdust volume. In pilot-scale SCB-M, the swine manure was fed to methane digester at organic loading rate (OLR) of 0.25-0.5 g VS/L/d. The effluent from methane digester was filtered using SCB. Results: The SLI at $0.04cc/cm^3$ showed good performance in terms of retention time. In pilot-scale SCB, the removal of $NH_3$-N and total nitrogen (T-N) was found to be around 59% and 28%, respectively. Similarly, volatile fatty acid (VFA) and total chemical oxygen demand (TCOD) removal was found be 56% and 43%, respectively. Conclusions: For SCB-M process, the SLI of $0.04cc/cm^3$ is recommended. The performance of swine manure treatment was improved more by using SCB-M system than using methane digester only.