• 한국환경보건학회지
• /
• 제39권3호
• /
• pp.289-299
• /
• 2013

Objectives: For the field application of the dielectric barrier discharge plasma reactor, scale-up of the plasma reactor is needed. This study investigated the possibility of inactivation of microorganisms in sewage using pilot multi-plasma reactor. We also considered the possibility of degradation of total organic carbon (TOC) and nonbiodegradable matter ($UV_{254}$) in sewage. Methods: The pilot plasma reactor consists of plasma reactor with three plasma modules (discharge electrode and quartz dielectric tube), liquid-gas mixer, high voltage transformers, gas supply equipment and a liquid circulation system. In order to determine the operating conditions of the pilot plasma reactor, we performed experiments on the operation parameters such as gas and liquid flow rate and electric discharge voltage. Results: The experimental results showed that optimum operation conditions for the pilot plasma reactor in batch experiments were 1 L/min air flow rate), 4 L/min liquid circulation rate, and 13 kV electric discharge voltage, respectively. The main operation factor of the pilot plasma process was the high voltage. In continuous operation of the air plasma process, residual microorganisms, $UV_{254}$ absorbance and TOC removal rate at optimal condition of 13 kV were $10^{2.24}$ CFU/mL, 56.5% and 8.6%, respectively, while in oxygen plasma process at 10 kV, residual microorganisms, $UV_{254}$ absorbance and TOC removal rate at optimal conditions were $10^{1.0}$ CFU/mL, 73.3% and 24.4%, respectively. Electric power was increased exponentially with the increase in high voltage ($R^2$ = 0.9964). Electric power = $0.0492{\times}\exp^{(0.6027{\times}lectric\;discharge\;voltage)}$ Conclusions: Inactivation of microorganisms in sewage effluent using the pilot plasma process was done. The performance of oxygen plasma process was superior to air plasma process. The power consumption of oxygen plasma process was less than that of air plasma process. However, it was considered that the final evaluation of air and oxygen plasma must be evaluated by considering low power consumption, high process performance, operating costs and facility expenses of an oxygen generator.

• 한국환경보건학회지
• /
• 제22권4호
• /
• pp.10-15
• /
• 1996

Treatment of a synthetic wastewater was made for the purpose of evaluating the performance of a pilot scale of an IFBBR. The particles used in this experiment were circular shaped polystyrene whose density was lower than that of water. The reactor volume was 400 l and the SCOD removal efficiency was more than 90% at HRT of 5 hrs. The IFBBR was successfully operated for 5 months without any significant problems. And it whs certained that IFBBR had a potential capability for treating wastewater.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.858-865
• /
• 2006

SMART Pilot is a multipurpose small capacity integral type reactor. Main coolant pump (MCP) of SMART Pilot is a canned-motor-type axial pump to circulate the primary coolant between nuclear fuel and steam generator in the primary system. The reactor is designed to operate under condition of $310^{\circ}C$ and 14.7MPa. Thus MCP has to be tested under same operating condition as reactor design condition to verify its performance and safety. In present wort a test apparatus to simulate real operating situations of the reactor has been designed and constructed to test MCP. And then functional tests, performance tests, and endurance tests have been carried out upon a prototype MCP. Canned motor characteristics, homologous head/torque curves, coast-down curves, NPSH curves and lift-time performance variations were obtained from the qualification test as well as hydraulic performance characteristics of MCP.

• 한국환경과학회지
• /
• 제6권1호
• /
• pp.25-31
• /
• 1997

The variations of gas hold-up, overall volumetric oxygen mass transfer coefficients and liquid circulation velocity in an internal loop reactor were investigated to manifest scale-up effect. The relationship between superficial gas velocity and gas hold-up were found as Ugr = 0.045 $\varepsilon$r in the pilot-scale and Ugr = 0.056 $\varepsilon$r in the bench-scale reactor. The overall volumetric oxygen mass tractsfer coefficient, KLa was slightly increased in the pilot-scale than in the bench-scale reactor. Flow regime was changed from the bubble flow to the churn-turbulent flow when the superficial gas velocity reached to 3.5 - 4 cm/sec in the pilot-scale.

• Korean Chemical Engineering Research
• /
• 제52권2호
• /
• pp.191-198
• /
• 2014

퇴비공장 또는 공공시설에서 발생되는 악취폐가스의 대표적인 제거대상 오염원인 황화수소와 암모니아를 포함한 악취폐가스를 처리하기 위하여 여러 운전 조건 하에서 바이오필터와 광촉매반응기로 구성된 semi-pilot 하이브리드시스템을 운전하였다. 황화수소 및 암모니아를 동시 처리하는 바이오필터시스템에서는 황화수소의 처리성능과 다르게 암모니아의 처리성능은 암모니아만을 처리하는 바이오필터시스템보다 훨씬 떨어졌다. Semi-pilot 하이브리드시스템의 황화수소와 암모니아에 대한 제거효율은 각각 약 83% 및 약 65% 정도이었다. 따라서 semi-pilot 바이오필터시스템의 경우보다 황화수소 및 암모니아에 대한 제거효율은 각각 4 및 30% 정도 증가하였다. 또한 황화수소와 암모니아의 동시제거를 할 때에 황화수소와 암모니아의 최대 제거용량은 각각 약 60 및 $37g/m^3/h$이었다. 따라서 semi-pilot 바이오필터시스템의 경우보다 황화수소 및 암모니아에 대한 최대 제거용량은 각각 약 9.1%와 약 23.3% 증가하였다. 그러므로 본 semi-pilot 하이브리드시스템은 semi-pilot 바이오필터시스템을 기준으로 황화수소보다 암모니아의 제거율과 최대 제거용량 제고에 더욱 기여하였다.

• 자원환경지질
• /
• 제53권6호
• /
• pp.695-701
• /
• 2020

본 연구는 중성의 pH 조건에서 Fe, Mn, As이 포함된 복합오염수를 배출하는 광산배수의 수질특성을 모니터링하였다. 침출수를 처리하기 위해 모래와 석회석으로 이루어진 수직흐름반응조(VFR, Vertical Flow Reactor)와 제강슬래그와 석회석을 적용한 반응조(ZMR)로 구성된 현장파일럿 장치를 설치하여 약 6개월간 운영하였다. 광산배수 내 존재하는 Fe, Mn, As에 대한 현장파일럿 장치의 처리효율을 평가하였다. 중성의 알칼리 수질특성을 가진 D광산 침출수에 VFR와 ZMR 공정을 적용한 결과, pH와 알칼리도가 효과적으로 상승하여 Fe과 As가 99%이상 제거되었으며 Mn은 98%이상 제거하여 복합오염물질 처리가 가능함을 확인하였다. 본 연구결과를 통해 Fe, As, Mn이 포함된 소규모 광산배수에 자연정화기반의 공법이 적용가능함을 확인하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E2호
• /
• pp.57-65
• /
• 2005

An experimental study was performed on the decomposition of gaseous ammonia and two selected volatile organic compounds (VOCs: toluene and acetone) in a combined nonthermal plasma reactor with corona and glow discharges. A lab pilot scale reactor (206 liter) equipped with a high electric power pack was used to determine the decomposition efficiency in relation with the inlet concentration and applied voltage. Three different types of discharging electrode such as wired rack, wire strings for corona discharge, and thin plate for glow discharge were put in order in the reactor. While decomposition of ammonia decreased with an increase in the initial concentration, acetone showed an opposite result. In the case of toluene however no explicit tendency was found in toluene and aceton. Negative discharge resulted in high decomposition efficiency than the positive one for all gases. A better removal of gas phase element could be achieved when fume dust were present simultaneously.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.195-204
• /
• 2018

A pilot scale study was conducted on a down-flow hanging sponge (DHS) reactor installed at a sewage treatment plant in Banda Aceh, Indonesia for treatment of desludging septic tank wastewater. Raw wastewater with an average biochemical oxygen demand (BOD) and total suspended solids of 139 mg/L and 191 mg/L, respectively, was pumped into the reactor. Two different hydraulic retention times (HRTs, 3 h and 4 h) were investigated, equivalent to organic loadings of 1.11 and $0.78kg\;BOD/m^3/d$, respectively. The average BOD concentration in the final effluent was 46 and 26 mg/L at HRTs of 3 and 4 h, respectively. The concentration of retained sludge along the reactor height was 10.2-18.7 g VSS/L-sponge, and the sludge activities were 0.24-0.32 and 0.04-0.40 mg/g VSS/h for heterotrophs and nitrification, respectively. Values of water hold-up volume, dispersion coefficient, and number of tank in-series found from tracer studies of clean sponge and biomass-loaded sponge confirmed that growth of retained sludge on the sponge module improved hydraulic performance of the reactor. Adoption of the DHS reactor by this Indonesian sewage treatment plant would enhance the role of the current desludging septic tank wastewater treatment system.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.235-247
• /
• 2020

Sulfur-Iodine cycle (SI cycle)은 요오드와 황을 첨가하여 최종적으로 물을 열화학적으로 분해하여 산소와 수소를 생산하는 공정으로 황산분해, 요오드화 수소 분해, 분젠반응 등 세가지 반응들로 이루어져 있다. 분젠 반응은 두가지 공정 중간에 존재하므로 두 반응에 필요한 화학물을 조달하는 역할로 이에 대한 상분리 및 반응기에 대한 분석이 중요하다. 본 연구에서는 50 L/hr 수소를 생산하는 pilot scale의 Sulfur-Iodine Cycle 중 분젠 공정에 대한 모사, 민감도 분석, 민감도 분석을 토대로한 각각 상분리기와 분젠 반응기에 대한 최적 조건을 제시하였다. 열역학 물성치의 계산을 위해 Electrolyte Non-Random Two Liquid (ELECNRTL) model 사용하였다. 모델에 대한 신뢰도 확보를 위해서 실제 pilot scale의 공정 데이터와 검증을 수행하였다. 반응기의 종류를 선정하기 위해 Continuous Stirred Tank Reactor (CSTR)과 Plug Flow Reactor (PFR) 동일한 온도 및 부피 변화에서 SO₂ 전환율을 비교하였다. 상분리기 선정을 위해 3상 분리 시스템(기체-액체-액체)과 액체-기체 분리 후 액체-액체 구조에서 H₂SO₄ 상과 HI_X 상에서의 불순물들을 비교하였다. PFR에서 온도, 지름, 길이를 결정 변수로 SO₂ 전환율을 최대화 하기 위한 최적화를 수행하였는데, 온도 121 ℃와 PFR의 지름이 0.20 m 및 길이 7.6 m 일 때 SO₂ 전환율이 98% 최적 결과임을 확인하였다. 기존 pilot scale과 동일한 운전 조건 하에 PFR의 지름 3/8 inch, 길이 3.0 m, 120 ℃ 일 때 인입 몰량인 I₂ 및 H₂O를 결정 변수로 SO₂ 전환율에 대한 최적화를 수행하였을 때, SO₂ 전환율이 10% 일때 H₂O 및 I₂ 의 인입 몰량은 각각 17%와 22%로 감소하였다. 앞선 조업 조건 최적화 조건 (121 ℃, 지름 0.20 m, 길이: 7.6 m) 경우에는 SO₂ 전환율이 98% 일 때 H₂O가 1% 그리고 I₂가 7% 감소하였다. 상분리기에서 HI_X 상내 H₂SO₄ 최소화하는 목적함수에서 그에 상응하는 온도, I₂와 H₂O를 결정 변수로 설정하였을 때, H₂O 몰량이 기존공정보다 17% 감소하고 I₂ 몰량이 24% 감소하였을 때 최소 불순물이 생성하였다.

• 환경위생공학
• /
• 제17권3호
• /
• pp.52-59
• /
• 2002

Pilot-scale PSSBR(Phase Separated Sequencing Batch Reactor) was operated to evaluate requirement of external carbon sources(${\Delta}gCOD/{\Delta}gNO_3^{-}-N$) in denitrification. Methanol and fermented food waste were used as external carbon sources. Methanol and fermented food waste were fed to the anoxic state of first reactor and concentration were 50 and 40 mgCOD/L on the basis of concentration in reactor, respectively. In case that external carbon source was not used, average $NO_3^{-}-N$ concentration in effluent was 22.49 mg/L. When methanol and fermented food waste were fed, average $NO_3^{-}-N$ concentration in effluent were 10.13 mg/L and 6.3 mg/L, respectively and requirement of external carbon sources were 4.04 and 2.5 ${\Delta}gCOD/{\Delta}gNO_3^{-}-N$, respectively. Fermented food waste was better than methanol in denitrification efficiency. Therefore fermented food waste could be one of the excellent external carbon sources for nitrogen removal in biological nutrient removal process.