• Journal of the Korean Ceramic Society
• /
• v.55 no.5
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• Biomedical Science Letters
• /
• v.13 no.4
• /
• pp.313-317
• /
• 2007

Melanogenesis refers to the biosynthesis of melanin pigment in melanocytes. Melanogenesis is controlled by the intra- and extracellular environments. In the present study, to develop a new whitening agent, it was investigated the antioxidant activity and the inhibitory effect of Ailanthi Radicis Cortex extract on tyrosinase activity and on melanogenesis in the B16/F1 melanoma cells. The inhibition ratio of tyrosinase activity of ethylacetate fraction from Ailanthi Radicis Cortex was higher than that of arbutin. The ethylacetate fraction showed scavenging activities of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals and superoxide anion radicals in a dose dependent manner. The highest inhibitory activity of melanogenesis was also in ethylacetate fraction ($40.0{\pm}5%$ at the concentration of $400{\mu}g/ml$). This study demonstrates that the Ailanthi Radicis Cortex extract might be used to be a potential agent for skin whitening.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.399-407
• /
• 1998

The infrared reflection coatings with pigment can be used to protect the surfaces of combustible materials exposed to fire. To obtain high reflectivities in the infrared range (0.5-10.mu.m) important to fire, several dielectric pigments, such as titanium dioxide, iron oxide, and silicon, can be synthesized to polymer coatings. The theoretical analysis shows that the coating design with particles diameter in the 1.5 to 2.5.mu.m range and volume fraction in the 0.1 to 0.2 range is estimated to be optimal. In the analysis of the radiation, the dependent scattering, absorption by polymeric binder, and the internal interface reflection are considered. In addition, the temperature distribution in the semi-transparent coating layer and an opaque substrate (PMMA) is also presented.

• Korean Journal of Pharmacognosy
• /
• v.29 no.3
• /
• pp.204-208
• /
• 1998

Geniposide, an iridoid glucoside, has been isolated from the butanol fraction of Gardenia jasminoides Ellis (Rubiaceae). The component was found to be transformed into the blue pigments by some aerobic bacteria, suggesting that geniposide is the precursor for the formation of pigments after converting into genipin, an aglycon of geniposide, by ${\beta}-glucosidase$. Some bacteria having a ${\beta}-glucosidase$ activity did not form the pigments, which may mean that the formation of pigments can only be occurred by the reaction of any enzyme or compound in the pigment-producing bacteria.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.937-941
• /
• 2003

Red mustard leaf (RML) kimchi was prepared with native Brassica juncea czerniak et coss as a major raw material and antioxidative characteristics of crude anthocyanin (CA)/refined anthocyanin (RA) isolated from RML kimchi were studied. Among crude pigment fractions, CA fraction showed a higher inhibition rate of peroxide formation in linoleic acid autoxidation system. These effects seemed to be increased with the increase of CA concentration. CA also was considered to have a role of electron donor by the experiments using DPPH ($\alpha$, $\alpha$＇-diphenyl-$\beta$-picrylhydrazyl) reaction. Furthermore, various RA fractions had a higher antioxidative activity and especially RA-fraction 3 demonstrated the highest score of the antioxidative characteristics in terms of the prevention of lipid peroxidation and scavenging of free radicals.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.41-48
• /
• 2001

This paper was made to evaluate the effect of the type of latex for coating on the printability by investigating the structure of pore such as the pore fraction, the number of pores, pore size and distribution of coated paper. The coated structure is mainly depend on the results of interaction between pigment and binder. It means that the structure of pore formed is chiefly affected by the type of latex. This physical properties of pore have a close relation with ink set-off associated with the drying rate, the speed of penetration of ink into base paper and printing gloss. Therefore it was necessary to find out the relationship between pore structure and the performance of printability by modifying the type of latex to vary the pore structure of coated paper. Acrylic latex was superior to S/B latex in the sedimentation volume, compressibility, smoothness, pore fraction and its number, the weight of transferred ink onto the coated paper and ink repellance. In contrast, water retention and ink setting were not good. in the comparison of anionic and amphoteric latex, amphoteric latex showed better performance in the thickness, smoothness, pore fraction and its number, pore size, the weight of ink transmitted and K&N ink receptivity, etc.

• Preventive Nutrition and Food Science
• /
• v.10 no.3
• /
• pp.244-250
• /
• 2005

The copper-containing enzyme, tyrosinase, catalyzes the oxidation of tyrosine into dihydroxy phenylalanine (DOPA) and subsequently DOPAquinone. It is responsible, not only for the pigment melanin biosynthesis in human skin, but also for browning in foods. In the present study, tyrosinase inhibitory and antioxidant activities of Korean mistletoe extract and its fractions were investigated. As a result, both water and methanol (MeOn) extracts inhibited the tyrosinase activity. Among the fractions, the fraction eluted with $95\%$ MeOn significantly inhibited the tyrosinase activity. The fraction was further purified, and the purified fraction C strongly inhibited the enzyme activity up to $92\%$. In addition, water and methanol extracts exerted radical scavenging effects. The fractions eluted with $70\%\;MeOn\;and\;95\%$ Me on showed high radical scavenging activities. In conclusion, these results suggest that Korean mistletoe extract and its fractions might be useful for the treatment of various dermatological disorders such as epidermal hyperpigmentation and for improving food quality.

• Korean Journal of Pharmacognosy
• /
• v.36 no.4 s.143
• /
• pp.273-277
• /
• 2005

In mammalian melanocytes, melanin synthesis is controlled by tyrosinase, the key enzyme in the pigment synthesis. In this study, to develop a new whitening agent, we have investigated the antioxidant and the inhibitory effect of Artemisia anomala extract on tyrosinase activity and melanigenesis in the B16/F1 melanoma cells. The inhibition ratio of tyrosinase activity of butanol fraction from A. anomala was higher than that of arbutin ($97.5{\pm}0.5%$ at the concentration of 2 mg/ml). The butanol fraction was shown scavenging activities of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals and superoxide anion radicals in a dose dependent manner. The highest inhibitory activity of melanogenesis was also butanol fraction ($25.0{\pm}3%$ at the concentration of $200\;{\mu}g/ml$). From these results, we suggest that the A. anomala extract might be used to be a potential agent for skin whitening.

• Medical Lasers
• /
• v.8 no.2
• /
• pp.90-93
• /
• 2019

The treatment of keloid and hypertrophic scars (HTSs) remains one of the most difficult challenges, with a high recurrence rate regardless of the method of treatment. The latest trend in scar management is a combined approach using multiple modalities that are individualized to the patient and that would provide successful results for keloid and HTSs. There are previous reports that stromal vascular fraction (SVF) is effective for scar remodeling. Based on these reports, we introduced the concept of a combination treatment using SVF injection and fractional ablative CO₂ laser. In this report, we present a 21-year-old woman who was involved in a car accident. A defect on her foot was covered with a skin graft, but the scars became elevated, which turned out to be HTSs. She was treated with a fractional ablative CO₂ laser for five sessions. A month later, SVF injection and fractional ablative CO₂ laser were conducted simultaneously. The result of a year's follow-up showed a flattened scar with resolution of pigment deposition. In conclusion, the combination treatment for HTSs with SVF injection and ablative fractional CO₂ laser is one of the modalities to achieve an excellent outcome for treating HTS.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.43-48
• /
• 1998

Prior to launch, simulated radiances of the Ocean Scanning Multispectral Imager (OSMI) will be very useful to guess the real imagery of OSMI and to check the data processing system for OSMI. The data processing system for OSMI which is one sensor of Korea Mult i - Purpose Satellite (KOMPSAT) scheduled for launch in 1999 is being developed based on the SeaWiFS Data Analysis System (SeaDAS). Such a simulation should include the spectral bands, orbital and scanning characteristics of the OSMI and KOMPSAT spacecraft. The simulation is also very helpful for finding and preparing for problem areas before launch. This paper describes a method to create simulated radiances of the OSMI over the oceans. Our method for constructing a simulated OSMI imagery is to propagate a KOMPSAT orbit over a field of Coastal Zone Color Scanner (CZCS) pigment values and to use the values and atmospheric components to calculate total radiances. A modified Brouwer - Lyddane model with drag was used for the realistic orbit prediction, the CZCS pigment data were used to compute water - leaving radiances, and a variety of radiative transfer models were used to calculate atmospheric contributions to total radiances detected by OSMI. Imagery of the simulated OSMI total radiances for 6 nominal bands was obtained. As expected, water - leaving radiances were only a small fraction of total radiances and sun glint contaminations were observed near the solar declination. Therefore, atmospheric correction is very important in the calculation of pigment concentration from total radiances. Because the imagery near the sun's glitter pattern is virtually useless and must be discarded, more advanced mission planning will be required.