• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.478-485
• /
• 2018

The effect of reduced graphene oxide (RGO) addition on the dielectric and piezoelectric behavior of the polyvinylidene fluoride (PVDF) films was studied. Dielectric constant increased by four times and piezoelectric coefficient also increased twice by the addition of RGO in the PVDF films. Based on capacitance-voltage and ellipsometry measurements and the Kramers-Kronig transformation, it is concluded that the enhanced dielectric and piezoelectric properties of the PVDF/RGO films resulted from the increased orientational polarization due to a phase transition from nonpolar crystalline ${\alpha}$ phase to polar crystalline ${\beta}$ phase in the PVDF structure.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.54-63
• /
• 1993

This paper presents the dynamic modeling and control methodology to arrest structural deflections of industrial robotic manipulators featuring elastic members retrofitted with surface bonded pizoelectric actuators and sensors. The cynamic modeling is accomplished by employing a variational theorem, prior to developing a finite element formulation. This finite element formulation accounts for both original robot member elements and also bonded piezoelectric material elements. The governing equation of motion is then modified by condensing the electric potential vectors and subsequently two different negative velocity feedback controllers are established; a constant-gain feedback controller and a constant- amplitude feedback controller. By adopting a Model P50 articulating industrial robot manufactured by Gerneral Electric Company, conputer simulations are underlaken in order to demonstrate superior performance characteristics to be accrued from this proposed methodology such as smaller deflections at the end-effector.

• Structural Engineering and Mechanics
• /
• 제19권5호
• /
• pp.477-501
• /
• 2005

In this study, a new smart beam finite element is proposed for the finite element modeling of beam-type smart structures that are equipped with bonded plate-type piezoelectric sensors and actuators. Constitutive equations for the direct piezoelectric effect and converse piezoelectric effect of piezoelectric materials are considered in the formulation. By using a variational principle, the equations of motion for the smart beam finite element are derived. The proposed 2-node beam finite element is an isoparametric element based on Timoshenko beam theory. The proposed smart beam finite element is applied to the free vibration control adopting a constant gain feedback scheme. The electrical force vector, which is obtained in deriving an equation of motion, is the control force equivalent to that in existing literature. Validity of the proposed element is shown through comparing the analytical results of the verification examples with those of other previous researchers. With the use of smart beam finite elements, simulation of free vibration control is demonstrated by sensing the voltage of the piezoelectric sensors and by applying the voltages to the piezoelectric actuators.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.617-621
• /
• 2010

($K_{0.5}Na_{0.5}$)($Nb_{0.96}Sb_{0.04}$)$O_3$+1.2 mol% $K_4CuNb_8O_{23}$ ceramics doped with iron oxide ($Fe_2O_3$) were prepared by a conventional mixed oxide method. And then, their piezoelectric and dielectric properties were investigated as a function of $Fe_2O_3$ addition. X-ray diffraction studies reveal that $Fe^{3+}$ diffuses into the NKN lattices to form a solid solution with a pure perovskite structure at room temperature. At the sintering temperature of $1,060^{\circ}C$, when 0.2 mol% $Fe_2O_3$ was doped, the piezoelectric constant ($d_{33}$), electromechanical coupling factor (Kp), and mechanical quality factor ($Q_m$) showed the excellent values of 131.67 pC/N, 0.436, and 696.36, respectively. Results show that $Fe_2O_3$ deped ($K_{0.5}Na_{0.5}$)($Nb_{0.96}Sb_{0.04}$)$O_3$+1.2 mol% $K_4CuNb_8O_{23}$ lead-free piezoelectric ceramics are a promising lead free material for piezoelectric transformer applications.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.665-670
• /
• 2009

Lead-free piezoelectric ($Na_{1/2}K_{1/2}$)$NbO_3$ ceramics doped with CuO and $MnO_2$ were fabricated using the conventional oxide-mixing technique. With increasing content of CuO and $MnO_2$, the dielectric constant(${\varepsilon}_{33}$) and mechanical quality factor($Q_m$) value increased, while electromechanical coupling factor($K_p$) and piezoelectric constant($d_{33}$) decreased. The piezoelectric and dielectric properties ($Na_{1/2}K_{1/2}$)$NbO_3$ ceramics doped with CuO 2.461 wt% and $MnO_2$ 0.538 wt% at sintered temperature $1050\;^{\circ}C$ were attained ${\varepsilon}_{33}$ = 403, $K_p$ = 15, $Q_m$ = 122 and $d_{33}$ = 36 pC/N. Based on response surface methodology results using design of experiment, it was concluded that ($Na_{1/2}K_{1/2}$)$NbO_3$ doped with CuO 0.477 wt% and $MnO_2$ 0.269 wt% has possibility composition of being used for piezoelectric transformer.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.126-130
• /
• 2008

In this study, in order to develop low loss multilayer piezoelectric actuator, PZN-PZT ceramics were fabricated using $Li_2CO_3,\;Bi_2O_3$, CuO and ZnO as sintering aids, their structural, piezoelectric and dielectric characteristics were investigated according to the amount of ZnO addition, At the sintering temperature of $870^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}_r$) and piezoelectric constant($d_{33}$) of 0.4 wt% ZnO added specimen (sintered at $870^{\circ}C$) showed the optimum value of $7.812g/cm^3$, 0.535, 916, 1399, 335 pC/N respectively. Taking into consideration above piezoelectric properties of the specimen sintered at low temperature, it was concluded that PZN-PZT ceramics using 0.4 wt% ZnO as additive showed the optimum characteristics as the composition ceramics for low loss multilayer piezoelectric actuator application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.293-295
• /
• 1991

In this study, we investigated the possibilty that $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ ceramics with strontium substitutions could be used for piezoelectric sounders. Piezoelectric buzzer is one of them. By partially substituting Sr for Ph, dielectric constants had values greater than 2000, the value proper piezoelectric buzzer, piezoelectric constant($d_{31}$) had a maximum value, 298 $[10^{-12}C/N]$, at the Sr 5 mol % substitution. Sound level of piezoelectric buzzer had the highest value of 91 dB at the Sr 5 mol % substitution.

• 한국전기전자재료학회논문지
• /
• 제15권7호
• /
• pp.597-601
• /
• 2002

In this study, the structural, dielectric and piezoelectric properties of $Pb[(Ni_{1/3}Nb_{2/3})_x-(Mn_{1/3}Nb_{2/3})_{0.09-x}-(Zn_{0.505}Ti_{0.495)_0.91]O_3$ (x=0, 0.01, 0.02, 0.03, 0.04, 0.05) system ceramics were investigated to develop the composition ceramics for piezoelectric transformer. All the specimens were sintered at $1250^{\circ}C$ and its physical properties were measured, and the results are as follows : With increasing PNN substitution for PMN-PZT system, dielectric constant was increased and electro-mechanical coupling factor($k_p$) was increased to 0.62 at 5 mol% while mechanical quality factor(Qm) was decreased.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.211-216
• /
• 1995

In this study, the piezoelectric ceramics/polymer composite transducers with 1-3 connectivity have been studied. A piezoelectric ceramics PZT prepared by Wet-Dry Combination method was used as a filler in polymer matrix Eccogel. We've got the pulse-echo response for 1-3 type piezc-electric composite transducers in water. It was shown that the transmitting and receiving sensitivity of 1-3 type piezoelectric composite transducers could be improved in comparison with that- of solid PZT transducers. The reason is for that 1-3 type Piezoelectric composites have low dielectric constant and density. There was in a good agreement between the resonant frequencies calculated from one period and observed results on the Ultrasonic Transducer Analyzer. According to these results we could be figured out the distance in water by virture of the pulse-echo response.

• 센서학회지
• /
• 제25권6호
• /
• pp.447-452
• /
• 2016

In this study, we fabricated and evaluated the performance of film speaker using PVDF/ZnO NP composite structure. PVDF piezoelectric films were fabricated and characterized by XRD and SEM. ZnO nanopillars were prepared by hydrothermal synthesis on prepared PVDF piezoelectric films. We analyzed and tested the acoustic signal characteristics of the piezoelectric film. In order to fabricate an acoustic structure with a wide frequency range from low to high frequency, we have fabricated various types of film speakers and investigated the frequency characteristics. As a result, the fundamental piezoelectric properties of PVDF show that the piezoelectric constant due to ZnO NP increases. And the overall acoustic signal level is also increased by 10% or more. We investigated frequency generation from 500 Hz to 10 KHz using different sizes with PVDF/ZnO NP composite film speaker.