• 제목/요약/키워드: Piers shape

검색결과 33건 처리시간 0.03초

연결부분 및 교각의 배열과 일반교량의 내진성능 (Arrangement of Connections and Piers and Earthquake Resistant Capacity of Typical Bridges)

  • 국승규
    • 한국전산구조공학회논문집
    • /
    • 제28권2호
    • /
    • pp.207-212
    • /
    • 2015
  • 사회기반시설물인 교량은 인적/물적 자원의 신속하고 원활한 이동을 위해 지장물을 극복하도록 설계/시공되는 구조물이다. 그러므로 교량의 교축방향으로 배열되는 교각의 형상과 규모는 지형의 제약을 받을 수밖에 없다. 이러한 교각의 형상과 규모는 지진하중의 전달경로를 결정하는 연결부분 배열과 함께 연결부분과 교각에 발생하는 작용력을 좌우하게 된다. 이 연구에서는 강재받침과 철근콘크리트 기둥을 연결부분과 교각으로 하는 일반교량을 대상으로 교각 및 강재받침 배열이 다른 해석모델을 설정하여 지진해석을 수행하였다. 해석결과로 구한 교각기둥과 강재받침의 강도/작용력 비로부터 각 해석모델의 연성파괴메카니즘을 구성하고 연결부분 및 교각 배열이 일반교량의 내진성능에 미치는 영향을 연성파괴메카니즘 구성 측면에서 제시하였다.

3차원 모델 기반의 미적 교각 설계 및 시공 기술 개발 (Development of Creative Design and Construction Methods of Bridge Piers using 3D Model)

  • 이상용;당고손;심창수
    • 한국BIM학회 논문집
    • /
    • 제5권2호
    • /
    • pp.12-18
    • /
    • 2015
  • Bridge piers typically have circular or rectangular shapes without decorative design. Prefabrication for accelerated construction has been widely adopted in bridge structures. Cost for steel formwork is a main restriction of creative irregular shapes. 3D modelling techniques allow creative design of columns and 3D printing provides possibility to minimize the fabrication cost. In this paper, 3D design process of bridge piers was suggested by converting 2D picture into 3D decorative shape. Formwork design using 3D printed panels was also proposed and mock-up tests were conducted. Precast columns need accurate geometry control from fabrication to assembly. Laser scanning and geometry control devices were adopted. Through the digitalized process of design, fabrication and assembly, creative design of structures can be realized in reasonable cost range.

니켈-크롬 합금강바를 이용한 기존 교각부의 내진보강 (Anti-Seismic of Existing Bridge Pier by Nickel-chrome Alloy Bar)

  • 장일영;송석민;유정수;손창호;손덕종
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.131-132
    • /
    • 2010
  • 최근 신설된 교량의 경우에는 개정판 도로교 설계기준에 의해 내진설계를 수행하여 시공되고 있으나, 내진설계규정이 적용되기 이전에 시공되어 사용중인 철근콘크리트 교각의 경우에는 지진에 취약할 수 있다. 반복 횡하중을 이용한 실내시험을 통해 교각 시험체를 니켈-크롬 합금강바 보강 전후 및 보강형태에 따른 부재의 거동변화를 측정분석 하였다.

  • PDF

TIME EVOLUTION OF SCOUR AROUND BRIDGE ABUTMENTS

  • Francesco Ballio;Enrico Orsi
    • Water Engineering Research
    • /
    • 제2권4호
    • /
    • pp.243-259
    • /
    • 2001
  • Local phenomena around bridge piers and abutments are generally considered to be similar, nevertheless the presence of the incoming boundary layer on the side wall in the abutment case generates extra pressure gradients and consequently a more complex vortex pattern. In the literature, experimental data for bridge abutments are relatively scarce; in particular almost no data are available for the time evolution of the scour. In this work we present the results of several long duration (3 days longrightarrow5weeks) clear water scour laboratory tests around bridge abutments; the time evolution of the erosion process is analysed with respect to local and global characteristic values (maxima, volume, hole shape). In particular we analyse the effect of the constriction ratio b/B between the transversal obstacle dimension and the flume width: in many practical situations abutments (or piers) obstruct a significant portion of the channel, so that the average acceleration due to constriction is expected to increase the scour effects of the local acceleration around the obstacle. Measured values for maximum scour are poorly predicted by literature formulas. Scour depths are positively correlated with the constriction ratio, but increases are smaller than expected from literature indications. Experimental results show that models for bridge piers cannot be directly applied to abutments; in particular, time scales for the latter are significantly larger than for piers.

  • PDF

2차원 모형을 이용한 수리해석(I) : 교각형상별 주변부 흐름해석 (Hydraulic Analysis Using a Two-Dimensional Model(I) : Flow Analysis around Bridge Piers with Pier Shapes)

  • 김응석;이승현
    • 한국산학기술학회논문지
    • /
    • 제16권7호
    • /
    • pp.4936-4941
    • /
    • 2015
  • 본 연구(I)는 교량 설치에 따른 발생되는 교각 형상별 수리학적 특성을 분석하였다. 교각의 형상은 사각형, 마름모형, 팔각형, 타원형, 원형 및 교각 설치전을 포함하여 총 6가지로 구분하였으며, 1차원 모형(HEC-RAS)와 2차원 모형( RMA-2)을 적용하여 수리특성을 분석하였다. 분석결과 사각형과 마름모형의 유속 벡터가 상류방향 흐름을 보임으로 교각주위의 침식 및 유사이송으로 하상변동에 큰 영향을 미칠 것으로 판단된다. 또한, 타원형의 유속이 설치전의 유속과 가장 유사하게 산정되어 흐름의 방해가 거의 없다고 판단된다. 이러한 분석은 향후 신설 교각형상 선택시 도움을 주리라 판단된다.

SMA Wire를 이용한 주철근 겹침이음된 RC 교각의 내진 보강 연구 (Seismic Retrofit of RC Columns with Lap-Spliced Longitudinal Rebars Wrapping by SMA Wires)

  • 박용권;이연훈;양동욱;임현식;정영수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.129-130
    • /
    • 2010
  • 내진설계가 도입되지 않은 1992년 이전에 설계 시공된 교량 교각의 경우 소성힌지구간에 충분한 횡구속이 되지 않은 상태에서 주철근 겹침 이음을 가지고 있는 것이 대부분이다. 이 연구는 주철근 겹침이음 교량 교각의 소성힌지구간을 형상기억합금 (SMA) 와이어로 보강하여 내진 성능 향상을 조사하였다. 준정적 (Quasi-Static) 실험 방법에 의하여 철근콘크리트 교각의 내진 성능을 평가하였다.

  • PDF

SRC 합성교각의 비탄성 거동 (Inelastic Behavior of the SRC Column)

  • 정인근;민진;심창수;정영수
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2005년도 학술발표회 논문집
    • /
    • pp.300-307
    • /
    • 2005
  • Steel Reinforced Concrete (SRC) composite column has several advantage such as excellent durability, rapid construction, reduction of column section. Due to these aspect, applications of SRC columns to bridge piers are continuously increasing. For the design of relatively large SRC columns for bridge piers, it is necessary to check the current design provisions which were based on small section having higher steel ratio. In this study, seven concrete encased composite columns were fabricated and static tests were performed. Embedded steel members were a H-shape rolled beam and a partially filled steel tube. Based on the test results, the ultimate strength according to section details and local behavior were estimated. For the analysis of inelastic behavior of the SRC column, the cracked section stiffness of the columns was evaluated and compared with calculations. The stiffness of the cracked section showed that 25% of the initial value and this stiffness reduction occurred at 85% of the ultimate load in the experiments.

  • PDF

점착성 하상에서의 교각형상에 따른 국부세굴 연구 (A Study of the Local Scour Considering the Pier Shapes in the Cohesive Bed)

  • 최계운;김기형
    • 한국수자원학회논문집
    • /
    • 제31권5호
    • /
    • pp.539-552
    • /
    • 1998
  • 점착성 하상에 교각을 설치하는 경우, 사용되는 국부세굴심도 산정공식은 대부분이 비점착성 하상을 가진 수로에서의 실험결과에 근거를 두고 있기 때문에, 정확성에 대한 논란이 있다. 본 논문에서는, 점착성 하상재료를 가진 실험수로 내에 5개 형태의 교각을 설치하여 발생되는 세굴심도의 변화에 대하여 연구하였다. 실험결과는 Froude 수와 교각폭에 대한 수심의 변화에 따라 분석되었으며 기존공식에 의한 결과와도 비교하였다. 본 논문에서는 실험 결과를 바탕으로 점착성 하상에서 사용할 수 있는 교각형상계수를 제안하였다. 교각형상계수는 원형교각 주위에서 발생되는 세굴심도에 대한 타형태의 교각주위에서 발생되는 세굴심도의 비율로 나타내었으며, 수심에 따라 2단계로 구분하여 제안하였다. 1단계는 교각폭에 대한 수심이 1.2 이하인 경우로 방정식에 의하여 교각형상계수가 제안된 반면 2단계에서는 상수값으로 교각형상계수가 제안되었다. 본 논문에서 제안된 교각 형상 계수는 본 실험에서 사용된 하상재료와 유사한 점착성 하상에 설치된 교량의 교각 국부세굴심 산정에 효과적으로 이용될 것으로 판단된다.

  • PDF

부유잡목에 의한 흐름차단이 하천에 미치는 영향 분석 (Analysis of Intercepted Flow Characteristics by Accumulated Debris)

  • 최계운;김영규;황영만;조상욱
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2007년도 학술발표회 논문집
    • /
    • pp.846-850
    • /
    • 2007
  • In this study debris like branch or trash are washed and flowed from land to stream by rainfall runoff at mountain or urban stream specially rainy season. These kinds of debris are accumulated at hydraulic construct on the way of flow along the stream. The shape or ratio of like these accumulated debris are various according to the location where it is accumulated and the material what it is, so that it is influenced to be varied to flow characteristics. To be simple of accumulated debris shape, it was made experiments though the variation of open ratio and the shape of accumulated debris by lab experiment using straight channel with two piers. From the result, the water level is inverse proportion to open ratio, and the water level more sensitive to the debris‘ width than length at the same area of accumulated debris.

  • PDF

Experimental and numerical study of Persian brick masonry barrel vaults under probable structural hazards

  • Saeid Sinaei;Esmaeel Izadi Zaman Abadi;Seyed Jalil Hoseini
    • Structural Engineering and Mechanics
    • /
    • 제87권4호
    • /
    • pp.317-332
    • /
    • 2023
  • Understanding and analysing the behaviour and response of historical structures in the face of climate changes and environmental conditions is of utmost significance for their preservation. There are several structural hazards associated with climate and hydrology changes in the region, including the settlement of piers, the rotation of piers, and temperature changes. The present study investigates the experimental and numerical structural behaviour of skewed and non-skewed Persian brick masonry barrel vaults under various conditions. The external loading conditions included pier rotation in five modes, settlement, and temperature variations in four states. Initially, the experiments extracted the mechanical properties of the scaled materials. Then, three semi-circular brick barrel vaults were tested with gravitational loads. The outcomes were used to develop and validate the finite element model. Following the development of the finite element model, numerical and parametric studies were conducted on the effect of the aforementioned structural hazards on the response of brick masonry barrel vaults with various Persian geometries (semi-circular, drop pointed, and four-centred), angles of skew (0, 15, 30, and 45 degrees), and dimensional ratios. According to the findings, the fragility of masonry materials makes historical structures susceptible to failure under different loading. A brick barrel vault fails in the presence of minor rotation and settlement of the piers. The four-centred geometric shape has the lowest performance among the seven Persian geometries; therefore, its health monitoring and retrofitting should be prioritised. In Isfahan, Iran, temperature variations, particularly during the warm seasons, cause critical conditions in such structures.