• 한국강구조학회 논문집
• /
• 제24권6호
• /
• pp.725-734
• /
• 2012

모듈화된 급속시공 교량 구조물의 하부구조 형식으로 충전 원형강관을 이용한 교각 구조물을 제안하였다. 다수의 충전강관을 연결하여 표준화된 제품으로 생산하여 운반 조립할 수 있는 구조 상세와 연결 상세를 제안하였다. 제안된 구조상세와 연결상세를 반영한 모듈러 교각의 정적실험을 강축과 약축에 대해서 횡변위 조건으로 수행하였다. 단일 기둥으로 설계한 것에 비하여 모듈러 CFT 교각 시스템이 브레이싱으로 연결된 편심효과로 인해 5.23배 높은 휨강성을 나타내었고 휨강도도 6배 이상 증가하였다. 합리적인 설계를 위해서는 모듈러 CFT 교각을 프레임으로 모델링하여 응력 및 처짐 검토를 수행하는 것이 타당한 것으로 나타났다. 교각을 구성하는 기둥간의 간격 조정을 통해서 필요한 내하력을 확보할 수 있을 것으로 판단되고 설계를 위한 고려사항을 제안하였다.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.351-357
• /
• 2022

본 연구에서는 해양 건설환경을 고려한 초고성능 콘크리트 해상 모듈러 잔교 시스템을 개발하고자 한다. 해상 모듈러 잔교 시스템은 최근에 개발된 압축강도 120 MPa 이상, 직접인장강도 7 MPa 이상을 갖는 초고성능 콘크리트 적용하여 설계, 제작 및 구조성능평가를 통하여 적용 가능성을 분석하였다. 기존에 프리캐스트 콘크리트로 시공된 해상 잔교는 시공단계에서 기초 파일부 항타 시 위치 또는 수직 변형으로 인한 오차를 해결하기 위한 아이디어와 가능성을 검증하고자 하였다. 또한, 구조성능 평가를 위하여 잔교 실험체를 초고성능 콘크리트를 이용하여 제작하였다. 휨 실험을 통하여 하중 분석을 수행한 결과, 예측 휨강도 대비 측정 휨강도는 극한한계상태에서 약 9 % 이상의 내하력을 확보하여 본 실험에서 요구하는 성능을 만족하였다. 향후 본 연구를 통하여 개발된 해상 모듈러 잔교 시스템을 활용한다면 충분한 내구성과 시공성으로 인한 경쟁력을 확보할 수 있을 것으로 판단된다.

• 한국BIM학회 논문집
• /
• 제3권4호
• /
• pp.11-18
• /
• 2013

Modular technology has become a major issue of the construction industries to enhance their productivity. Modular bridge construction generally requires the collaboration between the contractor, designer, fabricator and constructor. Therefore, a readily accessible information model based on BIM technology should be provided for their communication during a construction project life-cycle. In this study, BIM based 3D information modeling was carried out for the modular bridge pier. First, the product breakdown structure (PBS) and level of detail (LOD) of the pier were defined. Based on them, 3D models were created by using parametric modeling method. In addition, database was constructed for the exchange of geometry and property data of 3D models. Finally, application areas of 3D information model were suggested, including the quantity estimation and the 4D simulation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.29-32
• /
• 2009

Building foundations for Top-Down construction require a special setting, because the foundations have to be placed way before excavation for the substructure of main building, Usually, the foundation goes into the layer of rock and it is often called rock-pier foundation, Currently, a cage of steel reinforcing bars is inserted to the pre-excavated hole in the rock layer, hanging down from the wide flange steel column above. This paper presents a new method for connecting the prefounded column and the steel cage with a coupler for better connection between the two, The use of a circular Concrete Filled Tube (CFT) as a prefounded column makes it possible to have this type of connection. The details of the connection and application to a Top-Down construction site is also included in this paper.

• 한국지진공학회논문집
• /
• 제19권3호
• /
• pp.109-120
• /
• 2015

The purpose of this study was to investigate the performance of new hollow reinforced concrete (RC) bridge pier sections with triangular reinforcement details. The proposed triangular reinforcement details are economically feasible and rational and facilitate shorter construction periods. A model of pier sections with triangular reinforcement details was tested under quasi-static monotonic loading. As a result, proposed triangular reinforcement details was equal to existing reinforcement details in terms of required performance. In the companion paper, the parametric study for the performance assessment of new hollow RC bridge pier sections with triangular reinforcement details is performed.

• Computers and Concrete
• /
• 제18권5호
• /
• pp.1041-1051
• /
• 2016

In this study, the construction of a reinforced concrete bridge pier was analyzed from durability point of view. The goal of the study is to analyze the crack iniation condition due to construction and present some recommendations for construction conditions of the reinforced concrete bridge pier. The bridge is located at the western port area of Shenzhen, where the climate is high temperature and humidity. To control the cracking of concrete, a construction simulation was carried out for a heat transfer problem as well as a thermal stress problem. A shrinkage model for heat produced due to cement hydration and a Burger constitutive model to simulate the creep effect are used. The modelling based on Femmasse(C) is verified by comparing with the testing results of a real underground abutment. For the bridge pier, the temperature and stress distribution, as well as their evolution with time are shown. To simulate the construction condition, four initial concrete temperatures ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$) and three demoulding time tips (48h, 72h, 96h) are investigated. From the results, it is concluded that a high initial concrete temperature could result in a high extreme internal temperature, which causes the early peak temperature and the larger principle stresses. The demoulding time seems to be less important for the chosen study cases. Currently used 72 hours in the construction practice may be a reasonable choice.

• 한국강구조학회 논문집
• /
• 제22권2호
• /
• pp.161-171
• /
• 2010

교량은 재료의 발달과 신형식의 개발로 많은 발전을 이루어 왔으나, 현장에서 거의 모든 작업 공정이 이루어진다는 기본 틀을 탈피하지 못하고 있다. 급속 시공 건설 기술은 현재 세계적으로 그 효용성이 증가하게 되어 현재 국내 외적으로 조립식 교량에 대한 연구가 활발하게 진행되고 있다. 하지만, 상부구조와 비교하여 하부구조의 경우에는 연구 및 시공 실적이 매우 미미한 실정이다. 본 연구에서는 조립식 내부 구속 중공 CFT 교각에 대해서 대략적으로 설명하고, 교각 세그먼트 접합부의 설계식을 제안하였으며 교각 세그먼트 접합부의 구성요소에 대한 매개변수 연구를 수행하였다.

• 한국BIM학회 논문집
• /
• 제5권1호
• /
• pp.1-7
• /
• 2015

Modular technology has become a major issue of the construction industries to enhance their productivity. Modular bridge construction generally requires the data exchange between the contractors, designers, fabricators and constructors. Therefore, a readily accessible information model interface module based on BIM technology is essential for their communication during a project life-cycle. In this study, BIM based information model interface module for a modular pier was developed. For the information models, the PBS(Product Breakdown Structure) and LOD(Level of Development) were defined. Next, all components of a modular pier were conducted by the parametric modeling technique, and then 3D cell library interface was developed. An nterface module was also developed using VBA(Visua basic Application) for exchanging a data from 3D model library to other softwares such as Microstation, AutoCad and Excel and was connected with MS Access database. The developed information model interface module would improve the design quality of the modular pier and reduce the time and cost for design. Updated 3D information models could be utilized for the fabrication, assembly, and construction process for modular piers.

• 기술사
• /
• 제34권1호
• /
• pp.35-43
• /
• 2001

This paper Is described for the maintenance and repair method for the pier structure currently under repair works in the Han river bridges. During the economic growth period from the year 1960 to 1980, our engineer was concentrated only for study of the construction method of bridge. We have neglected the importance for the maintenance & repair method of construction structure. Therefore this paper will give you some ideas of repair and maintenance method.

• 기술발표회
• /
• 통권2006호
• /
• pp.75-85
• /
• 2006

The project comprised the construction of the new oil pier and associated topside facilities and demolition of exiting south pier. The site is located approximately 33km south of Kuwait city at MAA refinery. The approach trestle and berth structures of the new oil pier were designed to be supported by steel tubular piles Total 2,480 numbers of piles(795 piles at Approach Trestle, 1187 piles at Berth 1 -4 and 498 piles at Berth 5-6) had to be driven through the calcareous silty sand In this study, the design procedures for offshore steel pipe piles, evaluation for the compression and tension capacities by static and dynamic load test and effective driving criteria by the final set values are discussed