• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.1
• /
• pp.6-18
• /
• 2004

This paper addresses the development and design of the HAUSAT-l (Hankuk Aviation University SA'Tellite-D communication subsystem, which is a next generation picosatellite, developed by SSRL (Space System Research Lab.) of Hankuk Aviation University. The communication subsystem generally consumes the majority of power and volume for picosatellites, and thus its design is critical to the overall satellite and mission plans. The HAUSAT-l designs are implemented by using the 145.84 MHz for uplink and 435.84 MHz for downlink frequency bands. The simulation and test results of the homemade radio and the TNC (Terminal Node Controller) integrated on the HAUSAT - I , a picosatellite scheduled to launch on September 2004 by Russian launch vehicle "Dnepr", are presented for EM, QM and FM, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.105-116
• /
• 2004

The design of pico-/nano-satellites is particularly challenging due to constraints in mass, volume, power, and surface area. An efficient low-cost picosatellite HAUSAT-1 Electrical Power Subsystem (EPS) is developed to supply the power for various loads during the full mission life. This paper addresses design and analysis results of solar arrays, batteries, power conditioning and distribution units. The component selection, manufacturing and test results are presented by considering appropriate development cost and performance. The simulation results of power system are also illustrated, according to operational modes, through energy balance analysis. Finally, the EFS design feasibility is verified by comparing analysis results with functional and environmental test results at the system and component levels, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.101-110
• /
• 2004

Flight and Qualification Models of Single Board Computer (SBC), called On-Board Computer (OBC), for HAUSAT-l picosatellite, which is scheduled to launch on September, 2004 by Russian "Dnepr" launch vehicle, have been developed. The OBC of HAUSAT-1 has been designed with some improved features compared to other picosatellites. A multifunctional controller and up-to-date SPI (Serial Peripheral Interface) and 1-Wire interface are implemented to simplify the harness routing and to minimize the mass and size of OBC. The improved fault-tolerant architecture design methodology is incorporated in the HAUSAT-1 OBC to protect against space radiation environment. The functions of the OBC were fully tested and verified by the Electrical Test Bed (ETB) model. This paper is also addressing the environmental test results, such as random vibration and thermal vacuum tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.103-113
• /
• 2004

The satellite is exposed to the severe vibration environments such as random vibration environments such as random vibration, acceleration, shock, and acoustics during launch ascent and transportation. It is also faced with various space environments such as thermal vacuum, radiation and microgravity during the mission life. The satellite should be designed, manufactured, assembled and tested to be able to endure in these harsh environments. This paper addresses the results of the structural and thermal design and analyses for the HAUSAT-1 picosatellite which is scheduled to launch in the first quarter of 2005 by Russian launch vehicle "Dnepr". The qualification vibration and thermal vacuum tests have been conducted and passed at the satellite level to ensure that the HAUSAT-1 mechanical system was designed to be stable with enough margin.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.61-73
• /
• 2002

This paper addresses the conceptual design results of the HAUSAT-1 (Hankuk Aviation University SATellite-1), developed by Space System Research Lab. of Hankuk Aviation Univ., which is a new generation picosatellite. This project has been funded by Korean Government for the purpose of developing the space core technology. This is the first attempt at the level of university in Korea to develop the satellite weighing less than 1kg and accelerates opportunities with low construction, low launch cost space experiment platforms. The purpose of the HAUSAT-1 project is to offer graduate and undergraduate students great opportunities to be able to understand the design process of satellite development as a team member. Its mission objectives are to track its position by the GPS receiver system, to deploy the thin film solar cell panel to generate extra power, and to measure plasma density and temperature with the plasma sensor. The HAUSAT-1 will orbit at the altitude of 650 km with 65 degree inclination angle with 12 months of design mission life. It is planned to be launched on November 2003 by Russian launch vehicle "Dnepr".

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.2
• /
• pp.37-50
• /
• 2003

A next generation small satellite HAUSAT-1, the first picosatellite developed in Korea, is being developed as one of the international CubeSat program by Space System Research Lab. of Hankuk Aviation University. A fault-tolerant incremental design methodology has been addressed in this paper. In this study, the effect of system redundancy on reliability was in details analyzed in accordance with the implementation of fault-tolerant system. Four different system recovery levels are proposed for HAUSAT-1 fault-tolerant system optimization. As a result, the HAUSAT-1 fault-tolerant system architecture design and reliability analysis has acquired about 11% reliability improvement.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.67.2-67.2
• /
• 2012

경희대학교와 UC Berkeley, Imperial College London은 우주관측을 위한 초소형 인공위성인 TRIO-CINEMA(TRIO-CINEMA) Project를 수행하고 있다. TRIO-CINEMA는 총 3기의 인공위성으로 경희대학교에서 2기의 위성을, UC Berkeley에서 1기의 위성을, Imperial College에서 3개의 자력계를 제작하고 있다. CINEMA는 Cubesat의 3U 규격으로 크기는 $100mm{\times}100mm{\times}340.5mm$이고 무게는 약 3 kg, 소비전력은 약 3 W이며, 지구 주변의 ENA측정을 위한 주 탑재체인 STEIN(SupraThermal Electrons, Ions, and Neutrals)과 자기장 측정을 위한 부 탑재체인 MAGIC(MAGnetometer from Imperial College)이 탑재되어 약 1년간 800 km 태양동주기 궤도에서 임무를 수행할 예정이다. 위성의 발사는 별도의 POD(Picosatellite Orbital Deployer)라는 Adaptor를 사용해 발사체에 탑재되는데, 발사환경에서 위성이 받을 모든 현상에 관하여 NX Nastran을 사용해 계산을 진행하였다. 계산 결과의 검증을 위해 위성의 Structure Model을 가지고 Random Vibration test를 수행해 위성의 고유 진동수를 측정하였다. 또한 위성이 궤도에서 운용 중 다양하게 받게 되는 열원에 따른 위성의 각 부분의 온도변화를 NX TMG program을 사용하여 계산하였다. 계산 결과의 검증을 위해 3월 Thermal Cycle test 및 Thermal Balance test를 수행할 예정이다. UC Berkeley에서 제작한 위성 1기는 제작완료 후 발사를 위해 발사장으로 배송을 완료하였고, 경희대학교에서 제작 중인 CINEMA 위성 2기는 2012년 후반기 러시아에서 Dnepr 로켓을 사용해 발사 예정이다.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.1
• /
• pp.23-31
• /
• 2012

Thermal analysis and control design are prerequisite essential to design the satellite. In the space environment, it makes satellite survive from extreme hot and cold conditions. In recent years CubeSat mission is developed for many kinds of purpose. Triplet Ionospheric Observatory (TRIO)-CubeSat for Ion, Neutral, Electron, MAgnetic fields (CINEMA) is required to weigh less than 3 kg and operate on minimal 3 W power. In this paper we describe the thermal analysis and control design for TRIO-CINEMA mission. For this thermal analysis, we made a thermal model of the CubeSat with finite element method and NX6.0 TMG software is used to simulate this analysis model. Based on this result, passive thermal control method has been applied to thermal design of CINEMA. In order to get the better conduction between solar panel and chassis, we choose aluminum 6061-T6 for the material property of standoff. We can increase the average temperature of top and bottom solar panels from $-70^{\circ}C$ to $-40^{\circ}C $ and decrease the average temperature of the magnetometer from $+93^{\circ}C$ to $-4^{\circ}C$ using black paint on the surface of the chassis, inside of top & bottom solar panels, and magnetometer.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.94-102
• /
• 2023

A nylon wire holding and release mechanism (HRM) has been widely used for deployable applications of CubeSat owing to its simplicity and low cost. In general, structural safety of solar panel with an HRM has been designed by performing structural analysis under a launch environment. However, previous studies have not performed thermal analysis for HRM in an on-orbit environment. In this study, Launch and Early Orbit Phase (LEOP) thermal analysis was performed to evaluate thermal stability of the mechanism in the orbital thermal environment of the pogo pin-based HRM applied to CubeSat. In addition, the effectiveness of the thermal design and performance of the pogo pin-based HRM were verified through a thermal vacuum test.