• 제목/요약/키워드: Pickup Frame

검색결과 4건 처리시간 0.02초

Unigraphics NX4.0의 PDW를 활용한 픽업 프레임 스트립 레이아웃 설계에 관한 연구 (Study on the Design of Pickup Frame Strip Layout Utilizing PDW of Unigraphics NX4.0)

  • 최계광;김세환
    • 한국산학기술학회논문지
    • /
    • 제9권3호
    • /
    • pp.569-573
    • /
    • 2008
  • 본 논문에서는 픽업프레임의 스트립 레이아웃 도를 작성하였다. 프레스 금형에 있어서 스트립 레이아웃 도는 제품 양산을 결정하는 중요 요인이다. 장착되는 다른 부품과의 간섭요인을 용이하게 수정하기 위하여 3D CAD/CAM 시스템을 적용하였다. 블랭크 레이아웃을 최적화하고 광폭배열로 스트립 레이아웃 하여 재료 이용률을 28.49%로 향상시켰다. 사용된 3D CAD/CAM 소프트웨어는 Unigraphics NX 4.0이며 12개 공정으로 스트립 레이아웃 도를 작성하였다.

4 축 광픽업 액추에이터의 개발 (Development of a 4-axis optical pickup actuator)

  • 김재은;이경택;홍삼열;고의석;서정교;최인호;민병훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.856-860
    • /
    • 2008
  • Wire-suspensions in the conventional actuators mechanically support the moving part and guarantee the accuracy of the actuator without tangential tilt actuation. However, such a suspension configuration has considerable stiffness in the tangential tilt direction with two additional wire beams for the tangential tilt. Thus, we performed a design sensitivity analysis for the wire-suspension stiffness of 4-axis actuator and controlled the main parameters such as distance among wire-suspensions and wire-suspension length to allow tangential tilt flexibility. The elasticity of frame PCB that supports the moving part by wire-suspensions was also exploited to improve the flexibility of wire-suspension in the tangential tilt direction. A novel suspension structure was devised by establishing eight wire-suspensions at both sides of the moving part for electrical connection to coils. The magnetic circuit according to the proposed 4-axis actuator using multi-polar magnet and coils was also suggested for the generation of electromagnetic forces in the focusing, tracking, radial and tangential tilt directions.

  • PDF

Common-Mode Current Cancellation Scheme of Half-Bridge Switch-Mode Converter for DC Motor Drive

  • Srisawang, Arnon;Panaudomsup, Sumit;Prempraneerach, Yothin
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.1876-1879
    • /
    • 2003
  • Due to the conventional half-bridge switch-mode converters for dc motor drive have been usually using unbalanced circuit topologies which generate common-mode currents through parasitic capacitors distributed between the ground and the dc motor frame such as the heat-sink of switching devices or the frame of the dc motor. This paper describes methods that cancel common-mode current generated in half-bridge switch-mode converters by using circuit balancing technique. The circuit balancing is to make the noise pickup or occurring in both conductor lines, signal and return pathes, is equal in amplitude and opposite in phase so that it will be canceled out in the ground plane. The common-mode current cancellation in the proposed converter is confirmed by experimental results.

  • PDF

Unigraphics NX4.0의 PDW를 활용한 픽업 프레임 스트립레이아웃 설계에 관한 연구 (A Study on The Strip Layout Design of Pickup Frame Using PDW of Unigraphics NX4.0)

  • 최계광;김세환
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2007년도 추계학술발표논문집
    • /
    • pp.326-329
    • /
    • 2007
  • 본 논문에서는 픽업프레임의 스트립 레이아웃 도를 작성하였다. 프레스 금형에 있어서 스트립 레이아웃 도는 제품 양산을 결정하는 중요 요인이다. 장착되는 다른 부품과의 간섭요인을 용이하게 수정하기 위하여 3D CAD/CAM 시스템을 적용하였다. 블랭크 레이아웃을 최적화하고 광폭배열로 스트립 레이아웃 하여 재료 이용률을 28.49%로 향상시켰다. 사용된 3D CAD/CAM 소프트웨어는 Unigraphics NX 4.0이며 12개 공정으로 스트립 레이아웃 도를 작성하였다.

  • PDF