• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.569-573
• /
• 2008

In this thesis, the drawing was prepared for the strip layout of the pickup frame In the press die, the drawing for press layout is a major factor in determining the mass production of the product. The 3D CAD/CAM system was applied to easily correct interference factors with other parts to be mounted. This study improved the material utilization ratio to 28.49% by optimizing the blank layout and strip layout in wide-width arraying. The 3D CAD/CAM software used is Unigraphics NX 4.0, and the strip layout drawing was prepared in 12 processes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.856-860
• /
• 2008

Wire-suspensions in the conventional actuators mechanically support the moving part and guarantee the accuracy of the actuator without tangential tilt actuation. However, such a suspension configuration has considerable stiffness in the tangential tilt direction with two additional wire beams for the tangential tilt. Thus, we performed a design sensitivity analysis for the wire-suspension stiffness of 4-axis actuator and controlled the main parameters such as distance among wire-suspensions and wire-suspension length to allow tangential tilt flexibility. The elasticity of frame PCB that supports the moving part by wire-suspensions was also exploited to improve the flexibility of wire-suspension in the tangential tilt direction. A novel suspension structure was devised by establishing eight wire-suspensions at both sides of the moving part for electrical connection to coils. The magnetic circuit according to the proposed 4-axis actuator using multi-polar magnet and coils was also suggested for the generation of electromagnetic forces in the focusing, tracking, radial and tangential tilt directions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1876-1879
• /
• 2003

Due to the conventional half-bridge switch-mode converters for dc motor drive have been usually using unbalanced circuit topologies which generate common-mode currents through parasitic capacitors distributed between the ground and the dc motor frame such as the heat-sink of switching devices or the frame of the dc motor. This paper describes methods that cancel common-mode current generated in half-bridge switch-mode converters by using circuit balancing technique. The circuit balancing is to make the noise pickup or occurring in both conductor lines, signal and return pathes, is equal in amplitude and opposite in phase so that it will be canceled out in the ground plane. The common-mode current cancellation in the proposed converter is confirmed by experimental results.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.326-329
• /
• 2007

본 논문에서는 픽업프레임의 스트립 레이아웃 도를 작성하였다. 프레스 금형에 있어서 스트립 레이아웃 도는 제품 양산을 결정하는 중요 요인이다. 장착되는 다른 부품과의 간섭요인을 용이하게 수정하기 위하여 3D CAD/CAM 시스템을 적용하였다. 블랭크 레이아웃을 최적화하고 광폭배열로 스트립 레이아웃 하여 재료 이용률을 28.49%로 향상시켰다. 사용된 3D CAD/CAM 소프트웨어는 Unigraphics NX 4.0이며 12개 공정으로 스트립 레이아웃 도를 작성하였다.