• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.848-857
• /
• 2000

A pick-and-place operation in 3-dimensional environment is basic operation for human and multi-purpose manipulators. However, there may be a difficult problem for such manipulators. Especially, if the object cannot be moved with a single grasp, regrasping, which can be a time-consuming process, should be carried out. Regrasping, given initial and final pose of the target object, is a construction of sequential transition of object poses that are compatible with two poses in the point of grasp configuration. This paper presents a novel approach for solving regrasp problem. The approach consists of a preprocessing and a planning stage. Preprocessing, which is done only once for a given robot, generates a look-up table which has information of kinematically feasible task space of end-effector through all the workspace. Then, using the table planning automatically determines possible intermediate location, pose and regrasp sequence leading from the pick-up to put-down grasp. Experiments show that the presented is complete in the total workspace. The regrasp planner was combined with existing path.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.66
• /
• pp.75-94
• /
• 2015

The aim of this study is to examine the obligations of delivery of the goods focusing on the methods of delivery under the Incoterms 2010, comparing with CISG. The Incoterms 2010 provides various methods of delivery of the goods under the each rule(11 rules). And it is a little confusing for the parties of the contract of sales. This study reviewed specific methods of delivery of the goods with the view of practitioner. The purpose of Incoterms is to avoid misunderstanding of the contract of sales and to promote the international transactions. The uncertainties of the Incoterms 2010 shall cause disputes between the parties. Especially, when vehicles are used to pick up and deliver the goods, which party is responsible for the loading and unloading the goods. Under the D-term, which party is responsible for unloading the goods from the vehicle reached at the named place of destination is a little confusing. This study suggest some ideas on the specific methods of delivery to mitigate uncertainties and accept current practices at the field. Firstly, under the EXW rule, the seller must deliver the goods on the arriving means of transport at the seller's premises. Secondly, under the FCA rule, the seller must deliver the goods unloaded at the other place except seller's premises. Thirdly, under the CPT, CIP rules, the seller must deliver the goods unloaded irrespective of the mode of transport at the place of destination. Fourthly, the FOB, CFR, CIF rules must adapt the container transport practice.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.543-548
• /
• 1994

This is the paper on the development of assemnly automation and visual inspection system for smart card reader connector. The automation consists of 3 main process injection, assembly and inspection. During the injection, the main pin of a reel. transferred under uniform tension, is cut with an injection interval and positioned precisely to an injection mold by roll feeder after injection. The main base is stacked to a magazine for main pin's exact positionning to a mold . For last effective production, The turn table and pick & place are driver with gears and came by a single monter. We developed the small parts handling technigue for stable supply of micro ist pin and 2nd pin and could determine the orientation and position of those pins. For reliable inspection, We used the vision system which examins the guality of arranged pins with a CCD camera. The connector models which can be manufactured with this system are 8 pin and 10 pin type. The user can select the connector model for production and adjust the torerable error range during the inspection of arranged pins.

• Advances in Computational Design
• /
• v.4 no.3
• /
• pp.197-210
• /
• 2019

Motion generation of a four-bar linkage is a type of mechanism synthesis that has a wide range of applications such as a pick-and-place operation in manufacturing. In this research, the use of meta-heuristics for motion generation of a four-bar linkage is demonstrated. Three problems of motion generation were posed as a constrained optimization probably using the weighted sum technique to handle two types of tracking errors. A simple penalty function technique was used to deal with design constraints while three meta-heuristics including differential evolution (DE), self-adaptive differential evolution (JADE) and teaching learning based optimization (TLBO) were employed to solve the problems. Comparative results and the effect of the constraint handling technique are illustrated and discussed.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.1
• /
• pp.53-59
• /
• 2013

Chip mounter which is used to pick chips from the pre-specified position and place them on the target location of PCB is an essential device in semiconductor and LCD industries. Quick and high precision positioning is the key technology needed to increase productivity of chip mounters. As increasing acceleration and deceleration of placing motion, structural vibration induced from inertial reactive force and flexibility of mounter structure becomes a serious problem degrading positioning accuracy. Motivated from these, this paper proposed a new control design algorithm which combines a mounter structure acceleration feedforward compensation and an extended sliding mode control for fine positioning and suppression of structural vibration, simultaneously. The feasibility of the proposed control design was verified along with some simulation results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.107-113
• /
• 2010

In this paper, a prototype of cooperative work model for multi-robots system is introduced and the evolutionary approach is applied to generate the motions for the cooperative works of multi-robots system using genetic algorithm. The cooperative tasks can be performed by a humanoid robot and a mobile robot to deliver objects from shelves. Generation of the humanoid motions such as pick up, rotation, and place operation for the cooperative works are evolved. Modeling and computer simulation for the cooperative robots system are executed in Webots environments. Experimental results show the feasible and reasonable solutions for humanoid cooperative tasks are obtained.

• The Journal of Korea Robotics Society
• /
• v.16 no.3
• /
• pp.270-275
• /
• 2021

Most of the initial forms of cooperative robots were intended to repeat simple tasks in a given space. So, they showed no significant difference from industrial robots. However, research for improving worker's productivity and supplementing human's limited working hours is expanding. Also, there have been active attempts to use it as a service robot by applying AI technology. In line with these social changes, we produced a mobile manipulator that can improve the worker's efficiency and completely replace one person. First, we combined cooperative robot with mobile robot. Second, we applied speech recognition technology and deep learning based object detection. Finally, we integrated all the systems by ROS (robot operating system). This system can communicate with workers by voice and drive autonomously and perform the Pick & Place task.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.78-85
• /
• 2011

This article investigates kinematic characteristics of a Sch$\ddot{o}$nflies motion generator which represents a mechanism having translational three Degree-of-Freedom (DOF) and rotational one-DOF motion about a fixed axis. The mechanism consists of the base plate and the moving plate, and four identical limbs connecting them. Each limb employs two revolute joints (RR), one parallelogram (Pa), and two revolute joints (RR) from the base plate to the moving plate. The mechanism is driven by four actuators which are placed on the base plate to minimize dynamic loads. It is shown through simulations that the mechanism can be designed to secure large dexterous workspace and thus has very high potential for actual applications such as haptic devices and high-speed requiring tasks such as pick-and-place operations, riveting, screwing tasks, etc.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.697-702
• /
• 2000

The paper considers the problem of improving the productivity of surface mounting in the printed circuit board(PCB) assembly line. This problem is generally divided into two problems ; real assignment problem and pick-and -place sequencing problem which are known to have no polynomial time algorithms. In the last ten years algorithm designers have been trying to solve them separately. However they need to be solved jointly because they are highly interrelated. This paper proposes an evolutionary algorithm which can consider the two problems jointly and thus yield a better solution. In order to evaluate the proposed algorithm computer simulation is performed on real-life surface mounting machines. The proposed algorithm is expected to reduce the assembly time of surface mounting machines and thus improve the productivity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.733-737
• /
• 1996

This paper presents a method to measure tile position and orientation of a prismatic polyhedral object (of unknown width, length, height, and number of vertices) using machine vision. The width, length, and origin of workplace where an object is lying are defined as Preliminary operation. The edges of an object are detected from captured image using least sum of square error. The information of an object is determined from the geometric relationships between edges. As an user interface, a versatile image processing program is developed in several modules, and renders a very useful 3D measurement at a limited constraints when adopted in automation of production process. The flexibility of camera position from the algorithm developrf can be used for automated pick and place operations and feeding workpiece u: ;ing assembly robot.