• Physical Therapy Korea
• /
• v.10 no.3
• /
• pp.63-70
• /
• 2003

The purpose of this study was to compare the difference of joint position sense between measurements. Fourteen healthy male subjects were recruited for this study. The elbow joint position senses were measured using angle reproduction test. The elbow joint position sense was assessed with three experimental conditions: ipsilateral reproduction test in open-chain condition, contralateral reproduction test in open-chain condition, ipsilateral reproduction test with weight in open-chain condition and ipsilateral reproduction test in closed-chain condition. The angular difference between stimulus position and the reproduced position (angular error) was calculated in all testing conditions to examine the accuracy of the joint position sense. One way ANOVA was used to compare the error angles in all experimental conditions. The error angles between measurements were significantly different in elbow joint. The error angles was smallest in ipsilateral reproduction test with weight in open-chain condition and was greatest in the contralateral reproduction test in open-chain condition. Findings of this study indicate that testing methods, types of task, existence of resistance should be considered in clinical assessment for the joint position sense.

• Physical Therapy Korea
• /
• v.12 no.1
• /
• pp.22-27
• /
• 2005

The purpose of this study was to investigate the effects of visual information and different elevations of medially wedged insoles on the proprioceptive sense of the knee joint. The subjects of this study were 16 able-bodied men who were not athletic. An electrogoniometer was used to determine the error value between calculated 50% of full flexion (target position) and performed 50% of full flexion in a standing position with the upper extremities crossed. Tests were randomly performed in $2{\times}4$ conditions. Visual variations included open eyes vs. closed eyes, while the elevation was adjusted through the use (or lack thereof) of medially wedged insoles of 10 mm, 14 mm, and 18 mm. The average error value in each condition was statistically analyzed. The findings of this study revealed as follows: 1) The average error value was significantly higher with the subjects' eyes open than with their eyes closed (p<.05). 2) The averaged error value was also significantly higher when the subjects were elevated 18 mm than with no elevation at all (p<.05). The findings of this study should be considered in lower extremity rehabilitation programs when medially wedged insoles used.

• The Journal of Korean Physical Therapy
• /
• v.35 no.6
• /
• pp.213-219
• /
• 2023

Purpose: In this study, based on the error augmentation, we performed walking training with increased rhythmic auditory stimulation speed on the affected side (IRAS) and walking training with decreased rhythmic auditory stimulation speed on the unaffected side (DRAS). The purpose of this study was to verify whether motor learning was effective in improving balance ability. Methods: Twenty-eight subjects with chronic stroke were recruited from a rehabilitation center. The subjects were divided into three groups: an IRAS group (10 subjects), a DRAS group (9 subjects), and control group (9 subjects). They received 30minutes of neuro-developmental therapy and walking training for 30minutes, five times a week for three weeks. Static and functional balance ability were measured before and after the training period. Static balance was measured by balancia software. Functional balance was measured by the timed up and go test (TUG) and the berg balance scale (BBS). Results: After the training periods, the IRAS group showed a significant improvement in TUG, BBS, area 95% COP, and weight distribution on the affected side when compared to both the DRAS group and control group (p<0.05). Conclusion: Based on the results of this study, it is possible to consider error augmentation methods of motor learning if rhythmic auditory stimulation is applied to stroke patients in clinical practice. If the affected side is shorter than the unaffected side, the affected side should be adjusted to the increased rhythmic auditory stimulation speed, which is considered to be an effective intervention to improve balance ability.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.28 no.1
• /
• pp.39-51
• /
• 2022

Background: The purpose of this study is to investigate the effect of neck and shoulder self-stretching exercise using audiovisual media on neck pain, postural alignment, and joint position error in women with chronic neck pain. Methods: The subjects included 20 women that gave consent to participate in the study voluntarily. They performed the self-stretching exercises using audiovisual media was carried out 20 minutes 5 times a week during 3 weeks. Neck disability index (NDI) and visual analogue scale (VAS) were used to measure the functional disability and pain, A pressure pain threshold was measured using an algometer, and a cervical range of motion (CROM) measurement tool was used to measure the range of motion and error of proprioceptive position sense of the cervical spine. To assess posture alignment, forward head angle (FHA), forward shoulder angle (FSA) were measured using image J software. Results: The neck pain intensity was statistically significantly within group (p<.05). Neck and shoulder functional disability were a statistically significant difference within group (p<.05). Splenius capitis and upper trapezius pressure pain threshold were statistically significant difference in within group (p<.05). The postural alignment was statistically significantly within group (p<.05). The cervical range of motion in neck extension, right and left lateral flexion were statistically significantly within group (p<.05). The joint position error in neck flexion, extension, right and left lateral flexion decreased statistically significantly within group (p<.05). Conclusion: Self-stretching exercise using audiovisual media increased the mobility of the neck, decreased neck pain and joint position error, and improved posture alignment. As a result, there was a positive effect by applying the self-stretching exercise using audiovisual media to people with neck pain. Based on this, it is thought that it can be used as the basis for research related to home training programs for healthy self-management.

• Journal of Biosystems Engineering
• /
• v.32 no.4
• /
• pp.207-214
• /
• 2007

Based on the profiles of cone index with depth, physical properties of hardpan in selected rice fields were measured and analyzed in the study. An error correction algorithm removing a random measurement error from raw CI profile data was introduced in the study. The properties of hardpan included the shape, the thickness and the rice root growing layer. The analysis of physical properties of hardpan in the rice fields showed that the type of hardpan could be classified into 6 categories. The thickness of hardpan ranged from 6 cm up to 41 cm and the average hardness of hardpan was analyzed to be from 1.1 MPa through 3.2 MPa in Cone index.

• Electronics and Telecommunications Trends
• /
• v.37 no.2
• /
• pp.1-10
• /
• 2022

Similar to present computers, quantum computers comprise quantum bits (qubits) and an operating system. However, because the quantum states are fragile, we need to correct quantum errors using entangled physical qubits with quantum error correction (QEC) codes. The combination of entangled physical qubits with a QEC protocol and its computational model are called a logical qubit and fault-tolerant quantum computation, respectively. Thus, QEC is the heart of fault-tolerant quantum computing and overcomes the limitations of noisy intermediate-scale quantum computing. Therefore, in this study, we briefly survey the status of QEC codes and the physical implementation of logical qubit over various qubit technologies. In summary, we emphasize 1) the error threshold value of a quantum system depends on the configurations and 2) therefore, we cannot set only any specific theoretical and/or physical experiment suggestion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.546-550
• /
• 2002

This paper proposes an error compensation method that improves accuracy with geometry information of injection molding parts. Geometric information can give an improved accuracy in reverse engineering. Measuring data can not lead to get accurate geometric model, including errors of physical parts and measuring machines. Measuring data include errors which can be classified into two types. One is molding error in product, the other is measuring error. Measuring error includes optical error of laser scanner, deformation by probe forces of CMM and machine error. It is important to compensate these in reverse engineering. Least square method(LSM) provides the cloud data with a geometry compensation, improving accuracy of geometry. Also, the functional shape of a part and design concept can be reconstructed by error compensation using geometry information.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2019

Background: PNF patterns are the basis of human motion and can be expected to improve joint motion and coordination. Combined physical training with CLX training and PNF patterns can help to improve balance and perform functional mobility in the lower limb. The purpose of this study is to confirm the effect of CLX training combined with PNF pattern on balance ability. Design: Randomized Controlled Trial. Methods: Total 16 persons participate in this study and were randomly divided in two groups the experimental group and control group. In the experimental group, exercise program with PNF pattern and CLX was performed total 24 times for 8 weeks. In the exercise program, the PNF pattern composed of D1F and D2F was applied with CLX in five positions. Single limb hop test, Y-balance test and Balance Error scoring system were performed to evaluate the balance ability according to the interventions. Results: In the single limb hop, the experimental group revealed a significant difference than a control group (p<0.05).The result of balance error scoring system, experimental group revealed significant differences between before and after training and revealed significant differences than a control group (p<0.05). In the Y-balance test, the experimental group revealed significant differences than a control group in both side. Conclusion: The results of this study showed that the CLX exercise in combination with the PNF pattern had a positive effect on enhancing the balance ability of the normal adult and performing the functional mobility of the lower limb.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.669-676
• /
• 2015

In this paper, we described the simulation results of the phase offset performance of a clock in holdover mode which was normally operated in GPS Disciplined Oscillator (GPSDO). In the TIE model, we included the time error term caused by environmental temperature variation because one of the most important parameters of clock phase error is the frequency offset and drift caused by the variation of temperature. For the simulation, we employed Maximum Time Interval Error (MTIE) for the performance evaluation when the frequency offset and drift are estimated by using an Unbiased Finite Impulse Response (UFIR) filter with ladder algorithm. We assumed that the noise in the GPS measurement is white Gaussian with zero mean and 1 ns standard deviation, and temperature linearly varies with a slope of $1{^{\circ}C}$ per hour. From the simulation results, the followings were observed. First, with the estimation error of temperature of less than 3 % and the temperature compensation period of less than 900 seconds, the requirement of CDMA2000 phase synchronization under 10 us could be achieved for more than 40,000 seconds holdover time if we employ an OCXO (Oven Controlled Crystal Oscillator) clock. Second, in order to achieve the requirement of LTE-TDD under 1.5 us for more than 10,000 seconds holdover time, below 3 % estimation error and 500 seconds should be retained if a Rubidium clock is adopted.

• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.90-96
• /
• 2007

The purpose of this study was to compare the joint position sense at the knee joint at 3 different surface conditions by using the active knee joint angle reproduction test in the standing position. Twenty healthy volunteers (10 males and 10 females) age 20~29 years were recruited for this study. The knee joint position senses were assessed at three different surface conditions: on the floor (stable condition), TOGU (soft condition), and seat fit (unstable condition) in a closed kinetic chain. Testing orders were selected randomly. The absolute angle error was defined as the absolute difference between target angles ($30^{\circ}{\sim}45^{\circ}$ knee flexion) and subject perceived angle of the knee flexion. One way ANOVA was used to compare the absolute angle of error among 3 different conditions. The Independent t-test was used to compare the absolute angle of error between male and female. The error angles were significantly different among surface conditions ($1.3^{\circ}{\pm}1.2^{\circ}$ for the floor, $2.1^{\circ}{\pm}0.9^{\circ}$ for the TOGU, and $4.4^{\circ}{\pm}1.8^{\circ}$ for the seat fit, p<.05). There was no significant difference in error angle between male and female. In conclusion, the joint position sense of the knee joint in the closed kinetic chain decreased at unstable surface conditions. The result of this study indicates that surface conditions should be considered when assessing and training the joint position sense of the knee joint in clinical setting.